[Sun Jun  2 03:17:55 2013] Detection parameters:
  Position = (239.1, 358.1) = 4 56 2.11 30 21 3.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2935.0 +/- 63.8
  Background counts = 11.5
  Rate = 0.08 +/- 0.002

[Sun Jun  2 03:17:56 2013] Off-axis axis estimate = 6.10'
[Sun Jun  2 05:34:32 2013] Using EEF radius (= 9.48 ")to estimate initial spatial extent for simple fitting
[Sun Jun  2 05:34:32 2013] Initial guess for spatial extent in simple fitting = 9.48"
[Sun Jun  2 05:34:32 2013] source mask rpix=2.2, npix_max = 28, mask sum = 21, frac = 0.732
[Sun Jun  2 05:34:32 2013] Giving source the simple spatial ID 2 for pass 0, mean size = 9.48"
[Sun Jun  2 06:25:55 2013] fullrun_mos2_xmm0652330201_pi300-10000_cl_pass0_src2.ximg exists
[Sun Jun  2 06:25:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0652330201_pi300-10000_cl_pass0_src2.csv
[Sun Jun  2 06:25:55 2013] fullrun_mos2_xmm0652330201_pi300-10000_cl_pass0_src2_1.ximg exists
[Sun Jun  2 06:25:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0652330201_pi300-10000_cl_pass0_src2.csv
[Sun Jun  2 06:25:55 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0652330201_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0652330201_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  2 06:25:55 2013] fullrun_mos2_xmm0652330201_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Sun Jun  2 06:25:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0652330201_pi300-10000_cl_pass0_tfrozen_src2.csv
[Sun Jun  2 06:25:55 2013] fullrun_mos2_xmm0652330201_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Sun Jun  2 06:25:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0652330201_pi300-10000_cl_pass0_tfrozen_src2.csv
[Sun Jun  2 06:25:55 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0652330201_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0652330201_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  2 06:26:24 2013] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 11.740181 pixels away
[Sun Jun  2 06:26:24 2013] Vigneting correction estimate = 1.000000
[Sun Jun  2 06:26:24 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  2 06:26:24 2013] Assessing source extent using major
[Sun Jun  2 06:26:24 2013] Source does appear to be extended
[Sun Jun  2 06:26:24 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  2 08:07:24 2013] Using EEF radius (= 9.48 ")to estimate initial spatial extent for simple fitting
[Sun Jun  2 08:07:24 2013] Initial guess for spatial extent in simple fitting = 9.48"
[Sun Jun  2 08:07:24 2013] source mask rpix=2.2, npix_max = 28, mask sum = 21, frac = 0.732
[Sun Jun  2 08:07:24 2013] Giving source the simple spatial ID 2 for pass 1, mean size = 9.48"
[Sun Jun  2 08:53:52 2013] fullrun_mos2_xmm0652330201_pi300-10000_cl_pass1_src2.ximg exists
[Sun Jun  2 08:53:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0652330201_pi300-10000_cl_pass1_src2.csv
[Sun Jun  2 08:53:52 2013] fullrun_mos2_xmm0652330201_pi300-10000_cl_pass1_src2_1.ximg exists
[Sun Jun  2 08:53:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0652330201_pi300-10000_cl_pass1_src2.csv
[Sun Jun  2 08:53:52 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0652330201_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0652330201_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  2 08:53:52 2013] fullrun_mos2_xmm0652330201_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Sun Jun  2 08:53:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0652330201_pi300-10000_cl_pass1_tfrozen_src2.csv
[Sun Jun  2 08:53:52 2013] fullrun_mos2_xmm0652330201_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Sun Jun  2 08:53:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0652330201_pi300-10000_cl_pass1_tfrozen_src2.csv
[Sun Jun  2 08:53:52 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0652330201_pi300-10000_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0652330201_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  2 08:54:16 2013] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 12.953799 pixels away
[Sun Jun  2 08:54:16 2013] Vigneting correction estimate = 1.000000
[Sun Jun  2 08:54:16 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  2 08:54:16 2013] Assessing source extent using major
[Sun Jun  2 08:54:16 2013] Source does appear to be extended
[Sun Jun  2 08:54:16 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  2 11:03:37 2013] Counts = 2934.991699, rescaling region sizes by 2.000000
[Sun Jun  2 11:03:37 2013] XMMSAS src. selection expression = ellipse(20751.331390, 31102.881744, 1305.000000, 1305.000000, 0.000000, X, Y)
[Sun Jun  2 11:03:37 2013] Writing source region out to fullrun_mos2_xmm0652330201_pi300-10000_pass1_cl_src3_src.reg
[Sun Jun  2 11:03:37 2013] Extracting stamp from image fullrun_mos2_xmm0652330201_pi300-10000_cl_sm2.00.img.gz, (164, 283) - (314, 433)
[Sun Jun  2 11:03:37 2013] XMMSAS bgd. selection expression = annulus(20751.331390, 31102.881744, 4350.000000, 8700.000000, X, Y) && !ellipse(27257.472717, 27368.450287, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24330.569160, 30211.608400, 437.351213, 397.092011, 348.623000, X, Y) && !ellipse(24494.862160, 39627.536000, 573.785617, 352.244010, 348.360131, X, Y) && !ellipse(25088.751862, 29440.177612, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22718.992000, 32676.781400, 622.660018, 363.091210, 324.118786, X, Y) && !ellipse(17272.207550, 32839.833771, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12948.878647, 33981.493713, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26659.311824, 25584.168600, 480.339214, 306.566409, 26.180966, X, Y) && !ellipse(17653.561356, 39409.746246, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun  2 11:03:37 2013] Writing fullrun_mos2_xmm0652330201_pi300-10000_pass1_cl_src3.gif
[Sun Jun  2 11:07:22 2013] Mean detx,y = (6919.15, 3020.57) 
[Sun Jun  2 11:07:25 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun  2 11:09:21 2013] Binned source spectrum to 10 counts/bin
[Sun Jun  2 11:09:21 2013] Setting source spectrum file to fullrun_mos2_xmm0652330201_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sun Jun  2 11:09:21 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0652330201_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Sun Jun  2 11:19:16 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jun  2 11:19:16 2013] rmf not generated due to insufficient counts
[Sun Jun  2 11:31:46 2013] Updating aperture counts using extracted products
[Sun Jun  2 11:31:46 2013] Total counts from fullrun_mos2_xmm0652330201_pi300-10000_pass1_cl_src3_src_b10.pi.gz = 3219.00
[Sun Jun  2 11:31:46 2013] Total counts from fullrun_mos2_xmm0652330201_pi300-10000_pass1_cl_src3_bgd.pi.gz = 10617.00
[Sun Jun  2 11:31:46 2013] Got source and background scale factors 4410498.000000, 159339122.000000
[Sun Jun  2 11:31:46 2013] User source parameters:
  Position = (239.1, 358.1) = 4 56 2.11 30 21 3.4
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 2925.1 +/- 57.7
  Background aperture counts = 293.9
  Rate = 0.08 +/- 0.002

[Sun Jun  2 11:31:46 2013] Updating counts from extracted products
[Sun Jun  2 11:31:46 2013] Set source signif. to 2925.12/17.14 = 170.63
[Sun Jun  2 11:31:53 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun  2 11:31:53 2013] Using photon index=1.80, rate=0.0788, arf fullrun_mos2_xmm0652330201_pi300-10000_pass1_cl_src3.arf
[Sun Jun  2 11:31:53 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun  2 11:31:53 2013] Getting flux using calc_pl_flux failed
[Sun Jun  2 11:32:02 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun  2 11:32:05 2013] xmm0652330201/analysis//spectral/fullrun_mos2_xmm0652330201_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete