[Sun Jun  2 03:17:55 2013] Detection parameters:
  Position = (282.6, 246.0) = 4 55 47.48 30 12 50.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 46.8 +/- 8.8
  Background counts = 12.2
  Rate = 0.002 +/- 0.0003

[Sun Jun  2 03:17:56 2013] Off-axis axis estimate = 3.97'
[Sun Jun  2 05:34:32 2013] Using EEF radius (= 8.41 ")to estimate initial spatial extent for simple fitting
[Sun Jun  2 05:34:32 2013] Initial guess for spatial extent in simple fitting = 8.41"
[Sun Jun  2 05:34:32 2013] source mask rpix=1.9, npix_max = 23, mask sum = 15, frac = 0.633
[Sun Jun  2 05:34:32 2013] Giving source the simple spatial ID 17 for pass 0, mean size = 8.41"
[Sun Jun  2 06:25:55 2013] fullrun_mos2_xmm0652330201_pi300-10000_cl_pass0_src17.ximg exists
[Sun Jun  2 06:25:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0652330201_pi300-10000_cl_pass0_src17.csv
[Sun Jun  2 06:25:55 2013] fullrun_mos2_xmm0652330201_pi300-10000_cl_pass0_src17_1.ximg exists
[Sun Jun  2 06:25:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0652330201_pi300-10000_cl_pass0_src17.csv
[Sun Jun  2 06:25:55 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0652330201_pi300-10000_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0652330201_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  2 06:25:55 2013] fullrun_mos2_xmm0652330201_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Sun Jun  2 06:25:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0652330201_pi300-10000_cl_pass0_tfrozen_src17.csv
[Sun Jun  2 06:25:55 2013] fullrun_mos2_xmm0652330201_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Sun Jun  2 06:25:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0652330201_pi300-10000_cl_pass0_tfrozen_src17.csv
[Sun Jun  2 06:25:55 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0652330201_pi300-10000_cl_pass0_tfrozen_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0652330201_pi300-10000_cl_pass0_tfrozen_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  2 06:26:24 2013] Spatial fit model total counts = 166.016000, observed total counts = 126.000000
[Sun Jun  2 06:26:24 2013] Poor agreement between spatial fit and data for source 22
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Jun  2 06:26:24 2013] Vigneting correction estimate = 1.000000
[Sun Jun  2 06:26:24 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  2 06:26:24 2013] Assessing source extent using major
[Sun Jun  2 06:26:24 2013] Source does appear to be extended
[Sun Jun  2 06:26:24 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  2 08:07:24 2013] Using EEF radius (= 8.41 ")to estimate initial spatial extent for simple fitting
[Sun Jun  2 08:07:24 2013] Initial guess for spatial extent in simple fitting = 8.41"
[Sun Jun  2 08:07:24 2013] source mask rpix=1.9, npix_max = 23, mask sum = 15, frac = 0.633
[Sun Jun  2 08:07:24 2013] Giving source the simple spatial ID 17 for pass 1, mean size = 8.41"
[Sun Jun  2 08:53:52 2013] fullrun_mos2_xmm0652330201_pi300-10000_cl_pass1_src17.ximg exists
[Sun Jun  2 08:53:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0652330201_pi300-10000_cl_pass1_src17.csv
[Sun Jun  2 08:53:52 2013] fullrun_mos2_xmm0652330201_pi300-10000_cl_pass1_src17_1.ximg exists
[Sun Jun  2 08:53:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0652330201_pi300-10000_cl_pass1_src17.csv
[Sun Jun  2 08:53:52 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0652330201_pi300-10000_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0652330201_pi300-10000_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  2 08:53:52 2013] fullrun_mos2_xmm0652330201_pi300-10000_cl_pass1_tfrozen_src17.ximg exists
[Sun Jun  2 08:53:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0652330201_pi300-10000_cl_pass1_tfrozen_src17.csv
[Sun Jun  2 08:53:52 2013] fullrun_mos2_xmm0652330201_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists
[Sun Jun  2 08:53:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0652330201_pi300-10000_cl_pass1_tfrozen_src17.csv
[Sun Jun  2 08:53:52 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0652330201_pi300-10000_cl_pass1_tfrozen_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0652330201_pi300-10000_cl_pass1_tfrozen_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  2 08:54:16 2013] Spatial fit model total counts = 166.549000, observed total counts = 126.000000
[Sun Jun  2 08:54:16 2013] Poor agreement between spatial fit and data for source 22
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Jun  2 08:54:16 2013] Vigneting correction estimate = 1.000000
[Sun Jun  2 08:54:16 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  2 08:54:16 2013] Assessing source extent using major
[Sun Jun  2 08:54:16 2013] Source does appear to be extended
[Sun Jun  2 08:54:16 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  2 11:03:37 2013] XMMSAS src. selection expression = ellipse(24535.656158, 21356.806839, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jun  2 11:03:37 2013] Writing source region out to fullrun_mos2_xmm0652330201_pi300-10000_pass1_cl_src22_src.reg
[Sun Jun  2 11:03:37 2013] Extracting stamp from image fullrun_mos2_xmm0652330201_pi300-10000_cl_sm2.00.img.gz, (245, 209) - (320, 284)
[Sun Jun  2 11:03:37 2013] XMMSAS bgd. selection expression = annulus(24535.656158, 21356.806839, 1087.500000, 2175.000000, X, Y)
[Sun Jun  2 11:03:37 2013] Writing fullrun_mos2_xmm0652330201_pi300-10000_pass1_cl_src22.gif
[Sun Jun  2 11:14:59 2013] Mean detx,y = (2121.25, -6216.01) 
[Sun Jun  2 11:15:02 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun  2 11:15:29 2013] Binned source spectrum to 10 counts/bin
[Sun Jun  2 11:15:30 2013] Setting source spectrum file to fullrun_mos2_xmm0652330201_pi300-10000_pass1_cl_src22_src_b10.pi.gz
[Sun Jun  2 11:15:30 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0652330201_pi300-10000_pass1_cl_src22_bgd.pi.gz
[Sun Jun  2 11:29:22 2013] Not generating rmf since there are only 46 counts
[Sun Jun  2 11:29:22 2013] rmf not generated due to insufficient counts
[Sun Jun  2 11:31:51 2013] Updating aperture counts using extracted products
[Sun Jun  2 11:31:51 2013] Total counts from fullrun_mos2_xmm0652330201_pi300-10000_pass1_cl_src22_src_b10.pi.gz = 96.00
[Sun Jun  2 11:31:51 2013] Total counts from fullrun_mos2_xmm0652330201_pi300-10000_pass1_cl_src22_bgd.pi.gz = 618.00
[Sun Jun  2 11:31:51 2013] Got source and background scale factors 1013652.000000, 10164255.000000
[Sun Jun  2 11:31:51 2013] User source parameters:
  Position = (282.6, 246.0) = 4 55 47.48 30 12 50.7
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 34.4 +/- 10.8
  Background aperture counts = 61.6
  Rate = 0.0009 +/- 0.0003

[Sun Jun  2 11:31:51 2013] Updating counts from extracted products
[Sun Jun  2 11:31:51 2013] Set source signif. to 34.37/7.85 = 4.38
[Sun Jun  2 11:31:54 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun  2 11:31:54 2013] Using photon index=1.80, rate=0.000926, arf fullrun_mos2_xmm0652330201_pi300-10000_pass1_cl_src22.arf
[Sun Jun  2 11:31:54 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun  2 11:31:54 2013] Updating source flux to 1.6e-14
[Sun Jun  2 11:32:02 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun  2 11:32:05 2013] xmm0652330201/analysis//spectral/fullrun_mos2_xmm0652330201_pi300-10000_pass1_cl_src22_pl.csv not found, spectral fit skipped or did not complete