[Wed May 29 10:18:37 2013] Detection parameters:
  Position = (298.1, 244.4) = 12 57 25.48 27 24 16.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 54.4 +/- 12.0
  Background counts = 29.7
  Rate = 0.006 +/- 0.001

[Wed May 29 10:18:37 2013] Off-axis axis estimate = 3.92'
[Wed May 29 10:18:54 2013] Using EEF radius (= 8.39 ")to estimate initial spatial extent for simple fitting
[Wed May 29 10:18:54 2013] Initial guess for spatial extent in simple fitting = 8.39"
[Wed May 29 10:18:54 2013] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.060
[Wed May 29 10:18:54 2013] Giving source the simple spatial ID 28 for pass 0, mean size = 8.39"
[Wed May 29 10:18:54 2013] fullrun_pn_xmm0652310401_pi300-10000_cl_pass0_src28.ximg exists
[Wed May 29 10:18:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0652310401_pi300-10000_cl_pass0_src28.csv
[Wed May 29 10:18:54 2013] fullrun_pn_xmm0652310401_pi300-10000_cl_pass0_src28_1.ximg exists
[Wed May 29 10:18:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0652310401_pi300-10000_cl_pass0_src28.csv
[Wed May 29 10:18:54 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0652310401_pi300-10000_cl_pass0_src28_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0652310401_pi300-10000_cl_pass0_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 10:18:55 2013] fullrun_pn_xmm0652310401_pi300-10000_cl_pass0_tfrozen_src28.ximg exists
[Wed May 29 10:18:55 2013] fullrun_pn_xmm0652310401_pi300-10000_cl_pass0_tfrozen_src28_1.ximg exists
[Wed May 29 10:18:55 2013] Fit fullrun_pn_xmm0652310401_pi300-10000_cl_pass0_tfrozen_src28 appears to have run properly
[Wed May 29 10:19:03 2013] Spatial fit model total counts = 359.427000, observed total counts = 327.000000
[Wed May 29 10:19:03 2013] Offset between fit and detection position for source 29 = 0.341478 pixels
[Wed May 29 10:19:03 2013] 359.039100 total counts/ 306.083000 bgd. counts: snr = 3.026888
Spatial fit parameters:
  Offset between fit and detection position for source 29 = 0.341478 pixels
  Position = (297.8, 244.3) = 12 57 25.58 27 24 14.1
  Extent = 7.3 (4.8-12.5)", rotation angle = 0
  Source counts = 53.0 +/- 18.9
  Background counts = 306.1
  Rate = 0.005 +/- 0.002
[Wed May 29 10:19:03 2013] Vigneting correction estimate = 1.000000
[Wed May 29 10:19:03 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 10:19:03 2013] Assessing source extent using major axis lower bound
[Wed May 29 10:19:03 2013] Source does appear to be extended
[Wed May 29 10:19:03 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 10:19:16 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed May 29 10:19:16 2013] Initial guess for spatial extent in simple fitting = 7.32"
[Wed May 29 10:19:16 2013] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.840
[Wed May 29 10:19:16 2013] Giving source the simple spatial ID 25 for pass 1, mean size = 7.32"
[Wed May 29 10:19:16 2013] fullrun_pn_xmm0652310401_pi300-10000_cl_pass1_src25.ximg exists
[Wed May 29 10:19:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0652310401_pi300-10000_cl_pass1_src25.csv
[Wed May 29 10:19:16 2013] fullrun_pn_xmm0652310401_pi300-10000_cl_pass1_src25_1.ximg exists
[Wed May 29 10:19:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0652310401_pi300-10000_cl_pass1_src25.csv
[Wed May 29 10:19:16 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0652310401_pi300-10000_cl_pass1_src25_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0652310401_pi300-10000_cl_pass1_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 10:19:17 2013] fullrun_pn_xmm0652310401_pi300-10000_cl_pass1_tfrozen_src25.ximg exists
[Wed May 29 10:19:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0652310401_pi300-10000_cl_pass1_tfrozen_src25.csv
[Wed May 29 10:19:17 2013] fullrun_pn_xmm0652310401_pi300-10000_cl_pass1_tfrozen_src25_1.ximg exists
[Wed May 29 10:19:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0652310401_pi300-10000_cl_pass1_tfrozen_src25.csv
[Wed May 29 10:19:17 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0652310401_pi300-10000_cl_pass1_tfrozen_src25_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0652310401_pi300-10000_cl_pass1_tfrozen_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 10:19:24 2013] Spatial fit model total counts = 362.959000, observed total counts = 326.000000
[Wed May 29 10:19:24 2013] Poor agreement between spatial fit and data for source 29
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed May 29 10:19:24 2013] Vigneting correction estimate = 1.000000
[Wed May 29 10:19:24 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 10:19:24 2013] Assessing source extent using major axis lower bound
[Wed May 29 10:19:24 2013] Source does appear to be extended
[Wed May 29 10:19:24 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 10:19:37 2013] XMMSAS src. selection expression = ellipse(25856.302400, 21206.855600, 438.975013, 438.975013, 0.000000, X, Y)
[Wed May 29 10:19:37 2013] Not overwriting source region fullrun_pn_xmm0652310401_pi300-10000_pass1_cl_src29_src.reg
[Wed May 29 10:19:37 2013] Extracting stamp from image fullrun_pn_xmm0652310401_pi300-10000_cl_sm2.00.img.gz, (273, 219) - (323, 270)
[Wed May 29 10:19:37 2013] XMMSAS bgd. selection expression = annulus(25856.302400, 21206.855600, 731.625021, 1463.250042, X, Y) && !ellipse(24178.639158, 19978.534328, 533.499668, 366.750083, 62.743780, X, Y)
[Wed May 29 10:19:37 2013] Writing fullrun_pn_xmm0652310401_pi300-10000_pass1_cl_src29.gif
[Wed May 29 10:30:33 2013] Mean detx,y = (-3215.86, 5680.06) 
[Wed May 29 10:30:36 2013] Setting backscal keywords in source and bgd. spectrum
[Wed May 29 10:30:55 2013] Binned source spectrum to 10 counts/bin
[Wed May 29 10:30:56 2013] Setting source spectrum file to fullrun_pn_xmm0652310401_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Wed May 29 10:30:56 2013] Setting bgd. spectrum file to fullrun_pn_xmm0652310401_pi300-10000_pass1_cl_src29_bgd.pi.gz
[Wed May 29 10:48:01 2013] Not generating rmf since there are only 52 counts
[Wed May 29 10:48:01 2013] rmf not generated due to insufficient counts
[Wed May 29 10:48:48 2013] Updating aperture counts using extracted products
[Wed May 29 10:48:48 2013] Total counts from fullrun_pn_xmm0652310401_pi300-10000_pass1_cl_src29_src_b10.pi.gz = 153.00
[Wed May 29 10:48:48 2013] Total counts from fullrun_pn_xmm0652310401_pi300-10000_pass1_cl_src29_bgd.pi.gz = 602.00
[Wed May 29 10:48:48 2013] Got source and background scale factors 611200.000000, 4005334.000000
[Wed May 29 10:48:48 2013] User source parameters:
  Position = (297.8, 244.3) = 12 57 25.58 27 24 14.1
  Extent = 7.3 (4.8-12.5)", rotation angle = 0
  Source aperture counts = 61.1 +/- 13.4
  Background aperture counts = 91.9
  Rate = 0.006 +/- 0.001

[Wed May 29 10:48:49 2013] Calculating source flux in energy range 0.30-8.00
[Wed May 29 10:48:49 2013] Using photon index=1.80, rate=0.00493, arf fullrun_pn_xmm0652310401_pi300-10000_pass1_cl_src29.arf
[Wed May 29 10:48:49 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 29 10:48:49 2013] Updating source flux to 1.9e-14
[Wed May 29 10:48:57 2013] Flag p found in src. 29 procflags, skipping spectral fitting
[Wed May 29 10:48:57 2013] Source 29 has fewer than 100.000000 counts, skipping spectral fitting
[Wed May 29 10:49:00 2013] xmm0652310401/analysis//spectral/fullrun_pn_xmm0652310401_pi300-10000_pass1_cl_src29_pl.csv not found, spectral fit skipped or did not complete