[Wed May 29 10:18:38 2013] Detection parameters:
  Position = (277.7, 230.8) = 12 57 32.13 27 23 16.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 75.6 +/- 12.6
  Background counts = 26.1
  Rate = 0.007 +/- 0.001

[Wed May 29 10:18:39 2013] Off-axis axis estimate = 5.13'
[Wed May 29 10:18:56 2013] Using EEF radius (= 8.99 ")to estimate initial spatial extent for simple fitting
[Wed May 29 10:18:56 2013] Initial guess for spatial extent in simple fitting = 8.99"
[Wed May 29 10:18:56 2013] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.948
[Wed May 29 10:18:56 2013] Giving source the simple spatial ID 9 for pass 0, mean size = 8.99"
[Wed May 29 10:18:56 2013] fullrun_mos2_xmm0652310401_pi300-10000_cl_pass0_src9.ximg exists
[Wed May 29 10:18:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0652310401_pi300-10000_cl_pass0_src9.csv
[Wed May 29 10:18:56 2013] fullrun_mos2_xmm0652310401_pi300-10000_cl_pass0_src9_1.ximg exists
[Wed May 29 10:18:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0652310401_pi300-10000_cl_pass0_src9.csv
[Wed May 29 10:18:56 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0652310401_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0652310401_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 10:18:57 2013] fullrun_mos2_xmm0652310401_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Wed May 29 10:18:57 2013] fullrun_mos2_xmm0652310401_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Wed May 29 10:18:57 2013] Fit fullrun_mos2_xmm0652310401_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly
[Wed May 29 10:19:08 2013] Spatial fit model total counts = 159.115000, observed total counts = 149.000000
[Wed May 29 10:19:08 2013] Offset between fit and detection position for source 9 = 0.199488 pixels
[Wed May 29 10:19:08 2013] 158.076500 total counts/ 85.319100 bgd. counts: snr = 7.876877
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.199488 pixels
  Position = (277.9, 230.8) = 12 57 32.07 27 23 15.1
  Extent = 8.7 (5.1-12.8)", rotation angle = 0
  Source counts = 72.8 +/- 12.6
  Background counts = 85.3
  Rate = 0.005 +/- 0.0009
[Wed May 29 10:19:08 2013] Vigneting correction estimate = 1.000000
[Wed May 29 10:19:08 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 10:19:08 2013] Assessing source extent using major axis lower bound
[Wed May 29 10:19:08 2013] Source does appear to be extended
[Wed May 29 10:19:08 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 10:19:18 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed May 29 10:19:18 2013] Initial guess for spatial extent in simple fitting = 8.67"
[Wed May 29 10:19:18 2013] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.006
[Wed May 29 10:19:18 2013] Giving source the simple spatial ID 9 for pass 1, mean size = 8.67"
[Wed May 29 10:19:18 2013] fullrun_mos2_xmm0652310401_pi300-10000_cl_pass1_src9.ximg exists
[Wed May 29 10:19:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0652310401_pi300-10000_cl_pass1_src9.csv
[Wed May 29 10:19:18 2013] fullrun_mos2_xmm0652310401_pi300-10000_cl_pass1_src9_1.ximg exists
[Wed May 29 10:19:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0652310401_pi300-10000_cl_pass1_src9.csv
[Wed May 29 10:19:18 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0652310401_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0652310401_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 10:19:18 2013] fullrun_mos2_xmm0652310401_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Wed May 29 10:19:18 2013] fullrun_mos2_xmm0652310401_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Wed May 29 10:19:18 2013] Fit fullrun_mos2_xmm0652310401_pi300-10000_cl_pass1_tfrozen_src9 appears to have run properly
[Wed May 29 10:19:29 2013] Spatial fit model total counts = 154.591000, observed total counts = 144.000000
[Wed May 29 10:19:29 2013] Offset between fit and detection position for source 9 = 0.011098 pixels
[Wed May 29 10:19:29 2013] 152.290800 total counts/ 69.287800 bgd. counts: snr = 9.971613
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.011098 pixels
  Position = (277.9, 230.8) = 12 57 32.07 27 23 15.1
  Extent = 9.7 (5.9-14.2)", rotation angle = 0
  Source counts = 83.0 +/- 12.3
  Background counts = 69.3
  Rate = 0.006 +/- 0.0009
[Wed May 29 10:19:29 2013] Vigneting correction estimate = 1.000000
[Wed May 29 10:19:29 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 10:19:29 2013] Assessing source extent using major axis lower bound
[Wed May 29 10:19:29 2013] Source does appear to be extended
[Wed May 29 10:19:29 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 10:48:19 2013] XMMSAS src. selection expression = ellipse(24127.786400, 20027.368800, 579.906617, 579.906617, 0.000000, X, Y)
[Wed May 29 10:48:19 2013] Not overwriting source region fullrun_mos2_xmm0652310401_pi300-10000_pass1_cl_src9_src.reg
[Wed May 29 10:48:19 2013] Extracting stamp from image fullrun_mos2_xmm0652310401_pi300-10000_cl_sm2.00.img.gz, (245, 197) - (311, 264)
[Wed May 29 10:48:19 2013] XMMSAS bgd. selection expression = annulus(24127.786400, 20027.368800, 966.511028, 1933.022056, X, Y) && !ellipse(25852.896200, 21291.830800, 508.054415, 508.054415, 0.000000, X, Y)
[Wed May 29 10:48:19 2013] Writing fullrun_mos2_xmm0652310401_pi300-10000_pass1_cl_src9.gif
[Wed May 29 10:48:19 2013] ../../xmm0652310401/products/events/fullrun_mos2_xmm0652310401_pi300-10000_pass1_cl_src9_src.evt and ../../xmm0652310401/products/events/fullrun_mos2_xmm0652310401_pi300-10000_pass1_cl_src9_bgd.evt exist, delete to re-create
[Wed May 29 10:48:19 2013] Mean detx,y = (5391.54, -6122.89) 
[Wed May 29 10:48:19 2013] ../../xmm0652310401/products/images/fullrun_mos2_xmm0652310401_pi300-10000_pass1_cl_src9_src.img and ../../xmm0652310401/products/images/fullrun_mos2_xmm0652310401_pi300-10000_pass1_cl_src9_bgd.img exist, delete to re-create
[Wed May 29 10:48:19 2013] ../../xmm0652310401/products/spectra/fullrun_mos2_xmm0652310401_pi300-10000_pass1_cl_src9_src.pi and ../../xmm0652310401/products/spectra/fullrun_mos2_xmm0652310401_pi300-10000_pass1_cl_src9_bgd.pi exist, delete to re-create
[Wed May 29 10:48:19 2013] Setting source spectrum file to fullrun_mos2_xmm0652310401_pi300-10000_pass1_cl_src9_src.pi.gz
[Wed May 29 10:48:19 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0652310401_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Wed May 29 10:48:19 2013] ../../xmm0652310401/products/lightcurves/fullrun_mos2_xmm0652310401_pi300-10000_pass1_cl_src9_src.lc and ../../xmm0652310401/products/lightcurves/fullrun_mos2_xmm0652310401_pi300-10000_pass1_cl_src9_bgd.lc exist, delete to re-create
[Wed May 29 10:48:21 2013] Not generating rmf since there are only 83 counts
[Wed May 29 10:48:21 2013] rmf not generated due to insufficient counts
[Wed May 29 10:48:53 2013] Updating aperture counts using extracted products
[Wed May 29 10:48:53 2013] Total counts from fullrun_mos2_xmm0652310401_pi300-10000_pass1_cl_src9_src.pi.gz = 114.00
[Wed May 29 10:48:53 2013] Total counts from fullrun_mos2_xmm0652310401_pi300-10000_pass1_cl_src9_bgd.pi.gz = 471.00
[Wed May 29 10:48:53 2013] Got source and background scale factors 990870.000000, 7558628.000000
[Wed May 29 10:48:53 2013] User source parameters:
  Position = (277.9, 230.8) = 12 57 32.07 27 23 15.1
  Extent = 9.7 (5.9-14.2)", rotation angle = 0
  Source aperture counts = 52.3 +/- 11.7
  Background aperture counts = 61.7
  Rate = 0.004 +/- 0.0008

[Wed May 29 10:48:54 2013] No arf file for this source, not re-computing flux
[Wed May 29 10:48:56 2013] Source 9 has fewer than 100.000000 counts, skipping spectral fitting
[Wed May 29 10:48:57 2013] xmm0652310401/analysis//spectral/fullrun_mos2_xmm0652310401_pi300-10000_pass1_cl_src9_pl.csv not found, spectral fit skipped or did not complete