[Wed May 29 10:18:37 2013] Detection parameters:
  Position = (252.9, 340.8) = 12 57 40.24 27 31 20.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 123.7 +/- 15.1
  Background counts = 29.1
  Rate = 0.01 +/- 0.001

[Wed May 29 10:18:38 2013] Off-axis axis estimate = 4.51'
[Wed May 29 10:18:55 2013] Using EEF radius (= 8.68 ")to estimate initial spatial extent for simple fitting
[Wed May 29 10:18:55 2013] Initial guess for spatial extent in simple fitting = 8.68"
[Wed May 29 10:18:55 2013] source mask rpix=2.0, npix_max = 24, mask sum = 22, frac = 0.883
[Wed May 29 10:18:55 2013] Giving source the simple spatial ID 3 for pass 0, mean size = 8.68"
[Wed May 29 10:18:56 2013] fullrun_mos1_xmm0652310401_pi300-10000_cl_pass0_src3.ximg exists
[Wed May 29 10:18:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0652310401_pi300-10000_cl_pass0_src3.csv
[Wed May 29 10:18:56 2013] fullrun_mos1_xmm0652310401_pi300-10000_cl_pass0_src3_1.ximg exists
[Wed May 29 10:18:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0652310401_pi300-10000_cl_pass0_src3.csv
[Wed May 29 10:18:56 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0652310401_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0652310401_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 10:18:56 2013] fullrun_mos1_xmm0652310401_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Wed May 29 10:18:56 2013] fullrun_mos1_xmm0652310401_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Wed May 29 10:18:56 2013] Fit fullrun_mos1_xmm0652310401_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Wed May 29 10:19:06 2013] Source 5 is offset by 2.903637 and 7.789808 pixels which is larger than
2 X fitted extent = 1.375163 x 1.375163, not incorporating fit results
[Wed May 29 10:19:06 2013] Vigneting correction estimate = 1.000000
[Wed May 29 10:19:06 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 10:19:06 2013] Assessing source extent using major
[Wed May 29 10:19:06 2013] Source does appear to be extended
[Wed May 29 10:19:06 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 10:19:17 2013] Using EEF radius (= 8.68 ")to estimate initial spatial extent for simple fitting
[Wed May 29 10:19:17 2013] Initial guess for spatial extent in simple fitting = 8.68"
[Wed May 29 10:19:17 2013] source mask rpix=2.0, npix_max = 24, mask sum = 22, frac = 0.883
[Wed May 29 10:19:17 2013] Giving source the simple spatial ID 3 for pass 1, mean size = 8.68"
[Wed May 29 10:19:17 2013] fullrun_mos1_xmm0652310401_pi300-10000_cl_pass1_src3.ximg exists
[Wed May 29 10:19:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0652310401_pi300-10000_cl_pass1_src3.csv
[Wed May 29 10:19:17 2013] fullrun_mos1_xmm0652310401_pi300-10000_cl_pass1_src3_1.ximg exists
[Wed May 29 10:19:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0652310401_pi300-10000_cl_pass1_src3.csv
[Wed May 29 10:19:17 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0652310401_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0652310401_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 10:19:17 2013] fullrun_mos1_xmm0652310401_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Wed May 29 10:19:17 2013] fullrun_mos1_xmm0652310401_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Wed May 29 10:19:17 2013] Fit fullrun_mos1_xmm0652310401_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Wed May 29 10:19:27 2013] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 10.795094 pixels away
[Wed May 29 10:19:27 2013] Vigneting correction estimate = 1.000000
[Wed May 29 10:19:27 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 10:19:27 2013] Assessing source extent using major
[Wed May 29 10:19:27 2013] Source does appear to be extended
[Wed May 29 10:19:27 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 10:48:15 2013] XMMSAS src. selection expression = ellipse(21957.001434, 29601.627289, 652.500000, 652.500000, 0.000000, X, Y)
[Wed May 29 10:48:15 2013] Not overwriting source region fullrun_mos1_xmm0652310401_pi300-10000_pass1_cl_src5_src.reg
[Wed May 29 10:48:15 2013] Extracting stamp from image fullrun_mos1_xmm0652310401_pi300-10000_cl_sm2.00.img.gz, (215, 303) - (290, 378)
[Wed May 29 10:48:15 2013] XMMSAS bgd. selection expression = annulus(21957.001434, 29601.627289, 1087.500000, 2175.000000, X, Y) && !ellipse(20119.519379, 27349.790741, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20278.665200, 30044.710600, 445.382413, 445.382413, 0.000000, X, Y)
[Wed May 29 10:48:15 2013] Writing fullrun_mos1_xmm0652310401_pi300-10000_pass1_cl_src5.gif
[Wed May 29 10:48:15 2013] ../../xmm0652310401/products/events/fullrun_mos1_xmm0652310401_pi300-10000_pass1_cl_src5_src.evt and ../../xmm0652310401/products/events/fullrun_mos1_xmm0652310401_pi300-10000_pass1_cl_src5_bgd.evt exist, delete to re-create
[Wed May 29 10:48:15 2013] Mean detx,y = (3657.57, -3305.62) 
[Wed May 29 10:48:15 2013] ../../xmm0652310401/products/images/fullrun_mos1_xmm0652310401_pi300-10000_pass1_cl_src5_src.img and ../../xmm0652310401/products/images/fullrun_mos1_xmm0652310401_pi300-10000_pass1_cl_src5_bgd.img exist, delete to re-create
[Wed May 29 10:48:15 2013] ../../xmm0652310401/products/spectra/fullrun_mos1_xmm0652310401_pi300-10000_pass1_cl_src5_src.pi and ../../xmm0652310401/products/spectra/fullrun_mos1_xmm0652310401_pi300-10000_pass1_cl_src5_bgd.pi exist, delete to re-create
[Wed May 29 10:48:15 2013] Setting source spectrum file to fullrun_mos1_xmm0652310401_pi300-10000_pass1_cl_src5_src.pi.gz
[Wed May 29 10:48:15 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0652310401_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Wed May 29 10:48:15 2013] ../../xmm0652310401/products/lightcurves/fullrun_mos1_xmm0652310401_pi300-10000_pass1_cl_src5_src.lc and ../../xmm0652310401/products/lightcurves/fullrun_mos1_xmm0652310401_pi300-10000_pass1_cl_src5_bgd.lc exist, delete to re-create
[Wed May 29 10:48:17 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed May 29 10:48:17 2013] rmf not generated due to insufficient counts
[Wed May 29 10:48:49 2013] Updating aperture counts using extracted products
[Wed May 29 10:48:49 2013] Total counts from fullrun_mos1_xmm0652310401_pi300-10000_pass1_cl_src5_src.pi.gz = 176.00
[Wed May 29 10:48:49 2013] Total counts from fullrun_mos1_xmm0652310401_pi300-10000_pass1_cl_src5_bgd.pi.gz = 885.00
[Wed May 29 10:48:49 2013] Got source and background scale factors 1225836.000000, 10028400.000000
[Wed May 29 10:48:49 2013] User source parameters:
  Position = (252.9, 340.8) = 12 57 40.24 27 31 20.3
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 67.8 +/- 14.3
  Background aperture counts = 108.2
  Rate = 0.005 +/- 0.001

[Wed May 29 10:48:49 2013] Updating counts from extracted products
[Wed May 29 10:48:49 2013] Set source signif. to 67.82/10.40 = 6.52
[Wed May 29 10:48:51 2013] No arf file for this source, not re-computing flux
[Wed May 29 10:48:55 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed May 29 10:48:56 2013] xmm0652310401/analysis//spectral/fullrun_mos1_xmm0652310401_pi300-10000_pass1_cl_src5_pl.csv not found, spectral fit skipped or did not complete