[Wed Jun 20 06:43:04 2012] Detection parameters:
  Position = (319.0, 308.1) = 3 14 13.28 -22 35 45.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1069.0 +/- 40.4
  Background counts = 45.6
  Rate = 0.02 +/- 0.0006

[Wed Jun 20 06:43:05 2012] Off-axis axis estimate = 1.65'
[Wed Jun 20 08:31:41 2012] Using EEF radius (= 7.25 ")to estimate initial spatial extent for simple fitting
[Wed Jun 20 08:31:41 2012] Initial guess for spatial extent in simple fitting = 7.25"
[Wed Jun 20 08:31:41 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.852
[Wed Jun 20 08:31:41 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.25"
[Wed Jun 20 09:16:46 2012] fullrun_mos2_xmm0652290101_pi300-10000_cl_pass0_src1.ximg exists
[Wed Jun 20 09:16:46 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0652290101_pi300-10000_cl_pass0_src1.csv
[Wed Jun 20 09:16:46 2012] fullrun_mos2_xmm0652290101_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Jun 20 09:16:46 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0652290101_pi300-10000_cl_pass0_src1.csv
[Wed Jun 20 09:16:46 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0652290101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0652290101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 20 09:16:46 2012] fullrun_mos2_xmm0652290101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Jun 20 09:16:46 2012] fullrun_mos2_xmm0652290101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Jun 20 09:16:46 2012] Fit fullrun_mos2_xmm0652290101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Jun 20 09:17:04 2012] Spatial fit model total counts = 1454.630000, observed total counts = 1499.000000
[Wed Jun 20 09:17:04 2012] Offset between fit and detection position for source 2 = 0.450349 pixels
[Wed Jun 20 09:17:04 2012] 1439.004000 total counts/ 677.552000 bgd. counts: snr = 29.253054
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.450349 pixels
  Position = (318.5, 308.2) = 3 14 13.43 -22 35 45.1
  Extent = 5.7 (5.7-5.7)", rotation angle = 0
  Source counts = 761.5 +/- 37.9
  Background counts = 677.6
  Rate = 0.01 +/- 0.0006
[Wed Jun 20 09:17:04 2012] Vigneting correction estimate = 1.000000
[Wed Jun 20 09:17:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 20 09:17:04 2012] Assessing source extent using major axis lower bound
[Wed Jun 20 09:17:04 2012] Source does appear to be extended
[Wed Jun 20 09:17:04 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 20 11:07:27 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jun 20 11:07:27 2012] Initial guess for spatial extent in simple fitting = 5.67"
[Wed Jun 20 11:07:27 2012] source mask rpix=1.3, npix_max = 13, mask sum = 12, frac = 0.921
[Wed Jun 20 11:07:27 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.67"
[Wed Jun 20 12:20:36 2012] fullrun_mos2_xmm0652290101_pi300-10000_cl_pass1_src1.ximg exists
[Wed Jun 20 12:20:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0652290101_pi300-10000_cl_pass1_src1.csv
[Wed Jun 20 12:20:36 2012] fullrun_mos2_xmm0652290101_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Jun 20 12:20:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0652290101_pi300-10000_cl_pass1_src1.csv
[Wed Jun 20 12:20:36 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0652290101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0652290101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 20 12:20:36 2012] fullrun_mos2_xmm0652290101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Jun 20 12:20:36 2012] fullrun_mos2_xmm0652290101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Jun 20 12:20:36 2012] Fit fullrun_mos2_xmm0652290101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Jun 20 12:20:59 2012] Spatial fit model total counts = 1579.980000, observed total counts = 1500.000000
[Wed Jun 20 12:20:59 2012] Offset between fit and detection position for source 2 = 0.244118 pixels
[Wed Jun 20 12:20:59 2012] 1570.085000 total counts/ 924.015000 bgd. counts: snr = 21.253970
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.244118 pixels
  Position = (318.8, 308.2) = 3 14 13.35 -22 35 44.9
  Extent = 4.7 (4.3-5.0)", rotation angle = 0
  Source counts = 646.1 +/- 39.6
  Background counts = 924.0
  Rate = 0.009 +/- 0.0006
[Wed Jun 20 12:20:59 2012] Vigneting correction estimate = 1.000000
[Wed Jun 20 12:20:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 20 12:20:59 2012] Assessing source extent using major axis lower bound
[Wed Jun 20 12:20:59 2012] Source does appear to be extended
[Wed Jun 20 12:20:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 20 14:28:17 2012] XMMSAS src. selection expression = ellipse(27682.759400, 26768.586600, 280.729808, 280.729808, 0.000000, X, Y)
[Wed Jun 20 14:28:17 2012] Writing source region out to fullrun_mos2_xmm0652290101_pi300-10000_pass1_cl_src2_src.reg
[Wed Jun 20 14:28:17 2012] Extracting stamp from image fullrun_mos2_xmm0652290101_pi300-10000_cl_sm2.00.img.gz, (303, 292) - (335, 324)
[Wed Jun 20 14:28:17 2012] XMMSAS bgd. selection expression = annulus(27682.759400, 26768.586600, 467.883013, 935.766027, X, Y) && !ellipse(27054.227600, 27890.412800, 417.706412, 417.706412, 0.000000, X, Y)
[Wed Jun 20 14:28:17 2012] Writing fullrun_mos2_xmm0652290101_pi300-10000_pass1_cl_src2.gif
[Wed Jun 20 14:28:21 2012] Mean detx,y = (51.48, -33.96) 
[Wed Jun 20 14:28:23 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jun 20 14:28:31 2012] Binned source spectrum to 10 counts/bin
[Wed Jun 20 14:28:31 2012] Setting source spectrum file to fullrun_mos2_xmm0652290101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Wed Jun 20 14:28:31 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0652290101_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Wed Jun 20 15:02:52 2012] Updating aperture counts using extracted products
[Wed Jun 20 15:02:52 2012] Error reading totcts from fullrun_mos2_xmm0652290101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Wed Jun 20 15:02:53 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jun 20 15:02:53 2012] Using photon index=1.80, rate=0.0094, arf fullrun_mos2_xmm0652290101_pi300-10000_pass1_cl_src2.arf
[Wed Jun 20 15:02:53 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 20 15:02:53 2012] Updating source flux to 1.4e-13
[Wed Jun 20 15:04:14 2012] Reading fit data from xmm0652290101/analysis//spectral/fullrun_mos2_xmm0652290101_pi300-10000_pass1_cl_src2_pl.csv
[Wed Jun 20 15:04:14 2012] Spectral fit parameter nH value = 2.24081e+21
[Wed Jun 20 15:04:14 2012] Spectral fit parameter PhoIndex value = 2.78959
[Wed Jun 20 15:04:14 2012] Failed to get F(0.3-8.0) from xmm0652290101/analysis//spectral/fullrun_mos2_xmm0652290101_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Wed Jun 20 15:04:14 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jun 20 15:04:14 2012] Using Nh = 2.2e+21, photon index=2.79, rate=0.0094, arf fullrun_mos2_xmm0652290101_pi300-10000_pass1_cl_src2.arf
[Wed Jun 20 15:04:14 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 20 15:04:14 2012] Updating source flux to 1.1e-13