[Tue Jun 25 04:36:03 2013] Detection parameters:
  Position = (373.3, 157.9) = 6 53 47.86 -24 4 15.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2808.4 +/- 64.2
  Background counts = 108.3
  Rate = 0.03 +/- 0.0006

[Tue Jun 25 04:36:07 2013] Off-axis axis estimate = 11.55'
[Tue Jun 25 04:42:47 2013] Using EEF radius (= 12.20 ")to estimate initial spatial extent for simple fitting
[Tue Jun 25 04:42:47 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jun 25 04:42:47 2013] Initial guess for spatial extent in simple fitting = 12.20"
[Tue Jun 25 04:42:47 2013] source mask rpix=2.8, npix_max = 43, mask sum = 41, frac = 0.938
[Tue Jun 25 04:42:47 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 12.20"
[Tue Jun 25 08:40:47 2013] fullrun_pn_xmm0652250701_pi300-10000_cl_pass0_src1.ximg exists
[Tue Jun 25 08:40:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0652250701_pi300-10000_cl_pass0_src1.csv
[Tue Jun 25 08:40:47 2013] fullrun_pn_xmm0652250701_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Jun 25 08:40:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0652250701_pi300-10000_cl_pass0_src1.csv
[Tue Jun 25 08:40:47 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0652250701_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0652250701_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 25 08:40:49 2013] fullrun_pn_xmm0652250701_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Jun 25 08:40:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0652250701_pi300-10000_cl_pass0_tfrozen_src1.csv
[Tue Jun 25 08:40:49 2013] fullrun_pn_xmm0652250701_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Jun 25 08:40:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0652250701_pi300-10000_cl_pass0_tfrozen_src1.csv
[Tue Jun 25 08:40:49 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0652250701_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0652250701_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 25 11:56:41 2013] Spatial fit model total counts = 5192.400000, observed total counts = 4532.000000
[Tue Jun 25 11:56:41 2013] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Jun 25 11:56:42 2013] Vigneting correction estimate = 1.000000
[Tue Jun 25 11:56:42 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 25 11:56:42 2013] Assessing source extent using major
[Tue Jun 25 11:56:42 2013] Source does appear to be extended
[Tue Jun 25 11:56:42 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 25 11:57:29 2013] Using EEF radius (= 12.20 ")to estimate initial spatial extent for simple fitting
[Tue Jun 25 11:57:29 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jun 25 11:57:29 2013] Initial guess for spatial extent in simple fitting = 12.20"
[Tue Jun 25 11:57:29 2013] source mask rpix=2.8, npix_max = 43, mask sum = 41, frac = 0.938
[Tue Jun 25 11:57:29 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 12.20"
[Tue Jun 25 16:05:59 2013] fullrun_pn_xmm0652250701_pi300-10000_cl_pass1_src1.ximg exists
[Tue Jun 25 16:05:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0652250701_pi300-10000_cl_pass1_src1.csv
[Tue Jun 25 16:05:59 2013] fullrun_pn_xmm0652250701_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Jun 25 16:05:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0652250701_pi300-10000_cl_pass1_src1.csv
[Tue Jun 25 16:05:59 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0652250701_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0652250701_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 25 16:06:00 2013] fullrun_pn_xmm0652250701_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Jun 25 16:06:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0652250701_pi300-10000_cl_pass1_tfrozen_src1.csv
[Tue Jun 25 16:06:00 2013] fullrun_pn_xmm0652250701_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Jun 25 16:06:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0652250701_pi300-10000_cl_pass1_tfrozen_src1.csv
[Tue Jun 25 16:06:00 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0652250701_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0652250701_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 25 19:11:26 2013] Spatial fit model total counts = 5187.110000, observed total counts = 4532.000000
[Tue Jun 25 19:11:26 2013] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Jun 25 19:11:27 2013] Vigneting correction estimate = 1.000000
[Tue Jun 25 19:11:27 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 25 19:11:27 2013] Assessing source extent using major
[Tue Jun 25 19:11:27 2013] Source does appear to be extended
[Tue Jun 25 19:11:27 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 25 19:12:09 2013] Counts = 2808.357910, rescaling region sizes by 2.000000
[Tue Jun 25 19:12:09 2013] XMMSAS src. selection expression = ellipse(32427.085571, 13687.081665, 1305.000000, 1305.000000, 0.000000, X, Y)
[Tue Jun 25 19:12:09 2013] Writing source region out to fullrun_pn_xmm0652250701_pi300-10000_pass1_cl_src1_src.reg
[Tue Jun 25 19:12:09 2013] Extracting stamp from image fullrun_pn_xmm0652250701_pi300-10000_cl_sm2.00.img.gz, (298, 83) - (448, 233)
[Tue Jun 25 19:12:09 2013] XMMSAS bgd. selection expression = annulus(32427.085571, 13687.081665, 4350.000000, 8700.000000, X, Y) && !ellipse(24327.963837, 7894.523933, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25890.756561, 22698.428986, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32731.898865, 9963.881645, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39027.621155, 20455.115082, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27759.533447, 18773.637238, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32061.562378, 18515.513962, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30934.555542, 16237.500153, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35973.952000, 14566.498000, 577.832017, 281.753608, 339.397400, X, Y) && !ellipse(36613.068481, 14121.309052, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32031.499481, 11869.428696, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33539.678253, 10845.602272, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31228.002655, 10689.288750, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26653.116364, 9048.681763, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33457.887421, 22906.819580, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37086.867740, 22618.955000, 583.580017, 183.563205, 73.613000, X, Y) && !ellipse(36066.428440, 22461.641400, 801.752023, 801.752023, 0.000000, X, Y) && !ellipse(34472.950256, 22126.327255, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26603.597412, 21670.676437, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25283.516400, 21763.996000, 1314.976038, 302.607209, 279.328801, X, Y) && !ellipse(27022.927429, 18560.664062, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33842.362213, 17588.892807, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25530.628387, 17536.368362, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30038.708832, 17457.652054, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29897.781060, 16286.963800, 514.441615, 440.151213, 34.886600, X, Y) && !ellipse(27365.805878, 16048.073105, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33844.186218, 15764.266403, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29990.424469, 15665.216553, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28546.399170, 14279.871384, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25979.392059, 13263.421295, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37275.785034, 12479.782761, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36405.187653, 11442.987183, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33108.721863, 10738.861465, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27601.683990, 7568.475716, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jun 25 19:12:09 2013] Writing fullrun_pn_xmm0652250701_pi300-10000_pass1_cl_src1.gif
[Tue Jun 25 19:13:04 2013] Mean detx,y = (-1454.75, -12357.65) 
[Tue Jun 25 19:13:14 2013] Setting backscal keywords in source and bgd. spectrum
[Tue Jun 25 19:16:43 2013] Binned source spectrum to 10 counts/bin
[Tue Jun 25 19:16:44 2013] Setting source spectrum file to fullrun_pn_xmm0652250701_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Jun 25 19:16:44 2013] Setting bgd. spectrum file to fullrun_pn_xmm0652250701_pi300-10000_pass1_cl_src1_bgd.pi.gz