[Sat Jun  8 11:16:43 2013] Detection parameters:
  Position = (421.0, 262.5) = 6 53 30.77 -23 56 49.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 137.5 +/- 21.9
  Background counts = 164.3
  Rate = 0.001 +/- 0.0002

[Sat Jun  8 11:16:44 2013] Off-axis axis estimate = 9.26'
[Sat Jun  8 11:17:26 2013] Using EEF radius (= 11.06 ")to estimate initial spatial extent for simple fitting
[Sat Jun  8 11:17:26 2013] Initial guess for spatial extent in simple fitting = 11.06"
[Sat Jun  8 11:17:26 2013] source mask rpix=2.5, npix_max = 37, mask sum = 29, frac = 0.783
[Sat Jun  8 11:17:26 2013] Giving source the simple spatial ID 87 for pass 0, mean size = 11.06"
[Sat Jun  8 11:17:29 2013] fullrun_pn_xmm0652250601_pi300-10000_cl_pass0_src87.ximg exists
[Sat Jun  8 11:17:29 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0652250601_pi300-10000_cl_pass0_src87.csv
[Sat Jun  8 11:17:29 2013] fullrun_pn_xmm0652250601_pi300-10000_cl_pass0_src87_1.ximg exists
[Sat Jun  8 11:17:29 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0652250601_pi300-10000_cl_pass0_src87.csv
[Sat Jun  8 11:17:29 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0652250601_pi300-10000_cl_pass0_src87_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0652250601_pi300-10000_cl_pass0_src87.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  8 11:17:30 2013] fullrun_pn_xmm0652250601_pi300-10000_cl_pass0_tfrozen_src87.ximg exists
[Sat Jun  8 11:17:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0652250601_pi300-10000_cl_pass0_tfrozen_src87.csv
[Sat Jun  8 11:17:30 2013] fullrun_pn_xmm0652250601_pi300-10000_cl_pass0_tfrozen_src87_1.ximg exists
[Sat Jun  8 11:17:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0652250601_pi300-10000_cl_pass0_tfrozen_src87.csv
[Sat Jun  8 11:17:30 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0652250601_pi300-10000_cl_pass0_tfrozen_src87_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0652250601_pi300-10000_cl_pass0_tfrozen_src87.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  8 11:17:55 2013] Warning: source 87 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 90 at 13.407474 pixels away
[Sat Jun  8 11:17:55 2013] Vigneting correction estimate = 1.000000
[Sat Jun  8 11:17:55 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  8 11:17:55 2013] Assessing source extent using major
[Sat Jun  8 11:17:55 2013] Source does appear to be extended
[Sat Jun  8 11:17:55 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  8 11:18:41 2013] Using EEF radius (= 11.06 ")to estimate initial spatial extent for simple fitting
[Sat Jun  8 11:18:41 2013] Initial guess for spatial extent in simple fitting = 11.06"
[Sat Jun  8 11:18:41 2013] source mask rpix=2.5, npix_max = 37, mask sum = 29, frac = 0.783
[Sat Jun  8 11:18:41 2013] Giving source the simple spatial ID 83 for pass 1, mean size = 11.06"
[Sat Jun  8 11:18:43 2013] fullrun_pn_xmm0652250601_pi300-10000_cl_pass1_src83.ximg exists
[Sat Jun  8 11:18:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0652250601_pi300-10000_cl_pass1_src83.csv
[Sat Jun  8 11:18:43 2013] fullrun_pn_xmm0652250601_pi300-10000_cl_pass1_src83_1.ximg exists
[Sat Jun  8 11:18:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0652250601_pi300-10000_cl_pass1_src83.csv
[Sat Jun  8 11:18:43 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0652250601_pi300-10000_cl_pass1_src83_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0652250601_pi300-10000_cl_pass1_src83.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  8 11:18:45 2013] fullrun_pn_xmm0652250601_pi300-10000_cl_pass1_tfrozen_src83.ximg exists
[Sat Jun  8 11:18:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0652250601_pi300-10000_cl_pass1_tfrozen_src83.csv
[Sat Jun  8 11:18:45 2013] fullrun_pn_xmm0652250601_pi300-10000_cl_pass1_tfrozen_src83_1.ximg exists
[Sat Jun  8 11:18:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0652250601_pi300-10000_cl_pass1_tfrozen_src83.csv
[Sat Jun  8 11:18:45 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0652250601_pi300-10000_cl_pass1_tfrozen_src83_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0652250601_pi300-10000_cl_pass1_tfrozen_src83.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  8 11:19:11 2013] Spatial fit model total counts = 1212.430000, observed total counts = 1060.000000
[Sat Jun  8 11:19:11 2013] Poor agreement between spatial fit and data for source 90
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jun  8 11:19:11 2013] Vigneting correction estimate = 1.000000
[Sat Jun  8 11:19:11 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  8 11:19:11 2013] Assessing source extent using major
[Sat Jun  8 11:19:11 2013] Source does appear to be extended
[Sat Jun  8 11:19:11 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  8 11:19:49 2013] XMMSAS src. selection expression = ellipse(36582.511749, 22785.025421, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun  8 11:19:49 2013] Not overwriting source region fullrun_pn_xmm0652250601_pi300-10000_pass1_cl_src90_src.reg
[Sat Jun  8 11:19:49 2013] Extracting stamp from image fullrun_pn_xmm0652250601_pi300-10000_cl_sm2.00.img.gz, (384, 225) - (459, 300)
[Sat Jun  8 11:19:49 2013] XMMSAS bgd. selection expression = annulus(36582.511749, 22785.025421, 1087.500000, 2175.000000, X, Y) && !ellipse(35608.012451, 22643.321198, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33935.394440, 22294.861877, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38476.596375, 20708.757996, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun  8 11:19:49 2013] Writing fullrun_pn_xmm0652250601_pi300-10000_pass1_cl_src90.gif
[Sat Jun  8 11:20:15 2013] ../../xmm0652250601/products/events/fullrun_pn_xmm0652250601_pi300-10000_pass1_cl_src90_src.evt and ../../xmm0652250601/products/events/fullrun_pn_xmm0652250601_pi300-10000_pass1_cl_src90_bgd.evt exist, delete to re-create
[Sat Jun  8 11:20:15 2013] Mean detx,y = (-11129.94, -3342.52) 
[Sat Jun  8 11:20:15 2013] ../../xmm0652250601/products/images/fullrun_pn_xmm0652250601_pi300-10000_pass1_cl_src90_src.img and ../../xmm0652250601/products/images/fullrun_pn_xmm0652250601_pi300-10000_pass1_cl_src90_bgd.img exist, delete to re-create
[Sat Jun  8 11:20:15 2013] ../../xmm0652250601/products/spectra/fullrun_pn_xmm0652250601_pi300-10000_pass1_cl_src90_src_b10.pi.gz and ../../xmm0652250601/products/spectra/fullrun_pn_xmm0652250601_pi300-10000_pass1_cl_src90_bgd.pi exist, delete to re-create
[Sat Jun  8 11:20:15 2013] Setting source spectrum file to fullrun_pn_xmm0652250601_pi300-10000_pass1_cl_src90_src_b10.pi.gz
[Sat Jun  8 11:20:15 2013] Setting bgd. spectrum file to fullrun_pn_xmm0652250601_pi300-10000_pass1_cl_src90_bgd.pi.gz
[Sat Jun  8 11:20:15 2013] ../../xmm0652250601/products/lightcurves/fullrun_pn_xmm0652250601_pi300-10000_pass1_cl_src90_src.lc and ../../xmm0652250601/products/lightcurves/fullrun_pn_xmm0652250601_pi300-10000_pass1_cl_src90_bgd.lc exist, delete to re-create
[Sat Jun  8 11:20:35 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jun  8 11:20:35 2013] rmf not generated due to insufficient counts
[Sat Jun  8 11:20:35 2013] fullrun_pn_xmm0652250601_pi300-10000_pass1_cl_src90.arf exists, delete to re-create
[Sat Jun  8 12:00:18 2013] Updating aperture counts using extracted products
[Sat Jun  8 12:00:18 2013] Total counts from fullrun_pn_xmm0652250601_pi300-10000_pass1_cl_src90_src_b10.pi.gz = 724.00
[Sat Jun  8 12:00:18 2013] Total counts from fullrun_pn_xmm0652250601_pi300-10000_pass1_cl_src90_bgd.pi.gz = 5137.00
[Sat Jun  8 12:00:18 2013] Got source and background scale factors 1071320.000000, 8477558.000000
[Sat Jun  8 12:00:18 2013] User source parameters:
  Position = (421.0, 262.5) = 6 53 30.77 -23 56 49.1
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 74.8 +/- 27.9
  Background aperture counts = 649.2
  Rate = 0.0008 +/- 0.0003

[Sat Jun  8 12:00:18 2013] Updating counts from extracted products
[Sat Jun  8 12:00:18 2013] Set source signif. to 74.83/25.48 = 2.94
[Sat Jun  8 12:00:24 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun  8 12:00:24 2013] Using photon index=1.80, rate=0.000802, arf fullrun_pn_xmm0652250601_pi300-10000_pass1_cl_src90.arf
[Sat Jun  8 12:00:24 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun  8 12:00:24 2013] Updating source flux to 6.9e-15
[Sat Jun  8 12:00:54 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Jun  8 12:01:10 2013] xmm0652250601/analysis//spectral/fullrun_pn_xmm0652250601_pi300-10000_pass1_cl_src90_pl.csv not found, spectral fit skipped or did not complete