[Sat Jun 8 11:16:42 2013] Detection parameters: Position = (242.2, 299.0) = 6 54 27.51 -23 54 7.1 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 179.4 +/- 20.7 Background counts = 190.4 Rate = 0.003 +/- 0.0003 [Sat Jun 8 11:16:44 2013] Off-axis axis estimate = 4.08' [Sat Jun 8 11:17:26 2013] Using EEF radius (= 8.47 ")to estimate initial spatial extent for simple fitting [Sat Jun 8 11:17:26 2013] Initial guess for spatial extent in simple fitting = 8.47" [Sat Jun 8 11:17:26 2013] source mask rpix=1.9, npix_max = 23, mask sum = 12, frac = 0.501 [Sat Jun 8 11:17:26 2013] Giving source the simple spatial ID 81 for pass 0, mean size = 8.47" [Sat Jun 8 11:17:29 2013] fullrun_pn_xmm0652250601_pi300-10000_cl_pass0_src81.ximg exists [Sat Jun 8 11:17:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0652250601_pi300-10000_cl_pass0_src81.csv [Sat Jun 8 11:17:29 2013] fullrun_pn_xmm0652250601_pi300-10000_cl_pass0_src81_1.ximg exists [Sat Jun 8 11:17:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0652250601_pi300-10000_cl_pass0_src81.csv [Sat Jun 8 11:17:29 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0652250601_pi300-10000_cl_pass0_src81_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0652250601_pi300-10000_cl_pass0_src81.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Jun 8 11:17:30 2013] fullrun_pn_xmm0652250601_pi300-10000_cl_pass0_tfrozen_src81.ximg exists [Sat Jun 8 11:17:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0652250601_pi300-10000_cl_pass0_tfrozen_src81.csv [Sat Jun 8 11:17:30 2013] fullrun_pn_xmm0652250601_pi300-10000_cl_pass0_tfrozen_src81_1.ximg exists [Sat Jun 8 11:17:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0652250601_pi300-10000_cl_pass0_tfrozen_src81.csv [Sat Jun 8 11:17:30 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0652250601_pi300-10000_cl_pass0_tfrozen_src81_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0652250601_pi300-10000_cl_pass0_tfrozen_src81.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Jun 8 11:17:55 2013] Warning, spatial fit 81 centroid is now closest to src. 86 [Sat Jun 8 11:17:55 2013] Source 83 is offset by -6.589330 and -4.789342 pixels which is larger than 2 X fitted extent = 0.975655 x 0.975655, not incorporating fit results [Sat Jun 8 11:17:55 2013] Vigneting correction estimate = 1.000000 [Sat Jun 8 11:17:55 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat Jun 8 11:17:55 2013] Assessing source extent using major [Sat Jun 8 11:17:55 2013] Source does appear to be extended [Sat Jun 8 11:17:55 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sat Jun 8 11:17:55 2013] Source is confused with source 86 [Sat Jun 8 11:18:41 2013] Using EEF radius (= 8.47 ")to estimate initial spatial extent for simple fitting [Sat Jun 8 11:18:41 2013] Initial guess for spatial extent in simple fitting = 8.47" [Sat Jun 8 11:18:41 2013] source mask rpix=1.9, npix_max = 23, mask sum = 12, frac = 0.501 [Sat Jun 8 11:18:41 2013] Giving source the simple spatial ID 79 for pass 1, mean size = 8.47" [Sat Jun 8 11:18:43 2013] fullrun_pn_xmm0652250601_pi300-10000_cl_pass1_src79.ximg exists [Sat Jun 8 11:18:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0652250601_pi300-10000_cl_pass1_src79.csv [Sat Jun 8 11:18:43 2013] fullrun_pn_xmm0652250601_pi300-10000_cl_pass1_src79_1.ximg exists [Sat Jun 8 11:18:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0652250601_pi300-10000_cl_pass1_src79.csv [Sat Jun 8 11:18:43 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0652250601_pi300-10000_cl_pass1_src79_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0652250601_pi300-10000_cl_pass1_src79.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Jun 8 11:18:45 2013] fullrun_pn_xmm0652250601_pi300-10000_cl_pass1_tfrozen_src79.ximg exists [Sat Jun 8 11:18:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0652250601_pi300-10000_cl_pass1_tfrozen_src79.csv [Sat Jun 8 11:18:45 2013] fullrun_pn_xmm0652250601_pi300-10000_cl_pass1_tfrozen_src79_1.ximg exists [Sat Jun 8 11:18:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0652250601_pi300-10000_cl_pass1_tfrozen_src79.csv [Sat Jun 8 11:18:45 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0652250601_pi300-10000_cl_pass1_tfrozen_src79_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0652250601_pi300-10000_cl_pass1_tfrozen_src79.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Jun 8 11:19:11 2013] Warning, spatial fit 79 centroid is now closest to src. 86 [Sat Jun 8 11:19:11 2013] Source 83 is offset by -6.589087 and -4.789342 pixels which is larger than 2 X fitted extent = 0.975655 x 0.975655, not incorporating fit results [Sat Jun 8 11:19:11 2013] Vigneting correction estimate = 1.000000 [Sat Jun 8 11:19:11 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat Jun 8 11:19:11 2013] Assessing source extent using major [Sat Jun 8 11:19:11 2013] Source does appear to be extended [Sat Jun 8 11:19:11 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sat Jun 8 11:19:49 2013] XMMSAS src. selection expression = ellipse(21024.284332, 25965.883270, 652.500000, 652.500000, 0.000000, X, Y) [Sat Jun 8 11:19:49 2013] Not overwriting source region fullrun_pn_xmm0652250601_pi300-10000_pass1_cl_src83_src.reg [Sat Jun 8 11:19:49 2013] Extracting stamp from image fullrun_pn_xmm0652250601_pi300-10000_cl_sm2.00.img.gz, (205, 262) - (280, 337) [Sat Jun 8 11:19:49 2013] XMMSAS bgd. selection expression = annulus(21024.284332, 25965.883270, 1087.500000, 2175.000000, X, Y) && !ellipse(24117.348200, 29093.504000, 1230.928035, 1230.928035, 0.000000, X, Y) && !ellipse(22430.191376, 26088.983704, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20981.995026, 25607.382629, 870.000000, 870.000000, 0.000000, X, Y) [Sat Jun 8 11:19:49 2013] Writing fullrun_pn_xmm0652250601_pi300-10000_pass1_cl_src83.gif [Sat Jun 8 11:20:13 2013] ../../xmm0652250601/products/events/fullrun_pn_xmm0652250601_pi300-10000_pass1_cl_src83_src.evt and ../../xmm0652250601/products/events/fullrun_pn_xmm0652250601_pi300-10000_pass1_cl_src83_bgd.evt exist, delete to re-create [Sat Jun 8 11:20:13 2013] Mean detx,y = (3908.21, 2262.93) [Sat Jun 8 11:20:13 2013] ../../xmm0652250601/products/images/fullrun_pn_xmm0652250601_pi300-10000_pass1_cl_src83_src.img and ../../xmm0652250601/products/images/fullrun_pn_xmm0652250601_pi300-10000_pass1_cl_src83_bgd.img exist, delete to re-create [Sat Jun 8 11:20:13 2013] ../../xmm0652250601/products/spectra/fullrun_pn_xmm0652250601_pi300-10000_pass1_cl_src83_src_b10.pi.gz and ../../xmm0652250601/products/spectra/fullrun_pn_xmm0652250601_pi300-10000_pass1_cl_src83_bgd.pi exist, delete to re-create [Sat Jun 8 11:20:13 2013] Setting source spectrum file to fullrun_pn_xmm0652250601_pi300-10000_pass1_cl_src83_src_b10.pi.gz [Sat Jun 8 11:20:13 2013] Setting bgd. spectrum file to fullrun_pn_xmm0652250601_pi300-10000_pass1_cl_src83_bgd.pi.gz [Sat Jun 8 11:20:13 2013] ../../xmm0652250601/products/lightcurves/fullrun_pn_xmm0652250601_pi300-10000_pass1_cl_src83_src.lc and ../../xmm0652250601/products/lightcurves/fullrun_pn_xmm0652250601_pi300-10000_pass1_cl_src83_bgd.lc exist, delete to re-create [Sat Jun 8 11:20:35 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done [Sat Jun 8 11:20:35 2013] rmf not generated due to insufficient counts [Sat Jun 8 11:20:35 2013] fullrun_pn_xmm0652250601_pi300-10000_pass1_cl_src83.arf exists, delete to re-create [Sat Jun 8 12:00:17 2013] Updating aperture counts using extracted products [Sat Jun 8 12:00:17 2013] Total counts from fullrun_pn_xmm0652250601_pi300-10000_pass1_cl_src83_src_b10.pi.gz = 865.00 [Sat Jun 8 12:00:17 2013] Total counts from fullrun_pn_xmm0652250601_pi300-10000_pass1_cl_src83_bgd.pi.gz = 4725.00 [Sat Jun 8 12:00:17 2013] Got source and background scale factors 961492.000000, 7322194.000000 [Sat Jun 8 12:00:17 2013] User source parameters: Position = (242.2, 299.0) = 6 54 27.51 -23 54 7.1 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 244.6 +/- 30.4 Background aperture counts = 620.4 Rate = 0.003 +/- 0.0003 [Sat Jun 8 12:00:17 2013] Updating counts from extracted products [Sat Jun 8 12:00:17 2013] Set source signif. to 244.55/24.91 = 9.82 [Sat Jun 8 12:00:24 2013] Calculating source flux in energy range 0.30-8.00 [Sat Jun 8 12:00:24 2013] Using photon index=1.80, rate=0.00262, arf fullrun_pn_xmm0652250601_pi300-10000_pass1_cl_src83.arf [Sat Jun 8 12:00:24 2013] Assuming count rate is from the 0.30-10.00 bandpass [Sat Jun 8 12:00:24 2013] Updating source flux to 1.3e-14 [Sat Jun 8 12:00:54 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Sat Jun 8 12:01:10 2013] xmm0652250601/analysis//spectral/fullrun_pn_xmm0652250601_pi300-10000_pass1_cl_src83_pl.csv not found, spectral fit skipped or did not complete