[Sat Jun 8 11:16:42 2013] Detection parameters: Position = (321.4, 309.1) = 6 54 2.40 -23 53 25.5 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 173.0 +/- 23.7 Background counts = 181.1 Rate = 0.002 +/- 0.0003 [Sat Jun 8 11:16:44 2013] Off-axis axis estimate = 1.83' [Sat Jun 8 11:17:26 2013] Using EEF radius (= 7.35 ")to estimate initial spatial extent for simple fitting [Sat Jun 8 11:17:26 2013] Initial guess for spatial extent in simple fitting = 7.35" [Sat Jun 8 11:17:26 2013] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.044 [Sat Jun 8 11:17:26 2013] Giving source the simple spatial ID 74 for pass 0, mean size = 7.35" [Sat Jun 8 11:17:29 2013] fullrun_pn_xmm0652250601_pi300-10000_cl_pass0_src74.ximg exists [Sat Jun 8 11:17:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0652250601_pi300-10000_cl_pass0_src74.csv [Sat Jun 8 11:17:29 2013] fullrun_pn_xmm0652250601_pi300-10000_cl_pass0_src74_1.ximg exists [Sat Jun 8 11:17:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0652250601_pi300-10000_cl_pass0_src74.csv [Sat Jun 8 11:17:29 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0652250601_pi300-10000_cl_pass0_src74_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0652250601_pi300-10000_cl_pass0_src74.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Jun 8 11:17:30 2013] fullrun_pn_xmm0652250601_pi300-10000_cl_pass0_tfrozen_src74.ximg exists [Sat Jun 8 11:17:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0652250601_pi300-10000_cl_pass0_tfrozen_src74.csv [Sat Jun 8 11:17:30 2013] fullrun_pn_xmm0652250601_pi300-10000_cl_pass0_tfrozen_src74_1.ximg exists [Sat Jun 8 11:17:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0652250601_pi300-10000_cl_pass0_tfrozen_src74.csv [Sat Jun 8 11:17:30 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0652250601_pi300-10000_cl_pass0_tfrozen_src74_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0652250601_pi300-10000_cl_pass0_tfrozen_src74.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Jun 8 11:17:54 2013] Source 76 is offset by -5.748789 and -7.195972 pixels which is larger than 2 X fitted extent = 0.844294 x 0.844294, not incorporating fit results [Sat Jun 8 11:17:55 2013] Vigneting correction estimate = 1.000000 [Sat Jun 8 11:17:55 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat Jun 8 11:17:55 2013] Assessing source extent using major [Sat Jun 8 11:17:55 2013] Source does appear to be extended [Sat Jun 8 11:17:55 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sat Jun 8 11:18:41 2013] Using EEF radius (= 7.35 ")to estimate initial spatial extent for simple fitting [Sat Jun 8 11:18:41 2013] Initial guess for spatial extent in simple fitting = 7.35" [Sat Jun 8 11:18:41 2013] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.044 [Sat Jun 8 11:18:41 2013] Giving source the simple spatial ID 72 for pass 1, mean size = 7.35" [Sat Jun 8 11:18:43 2013] fullrun_pn_xmm0652250601_pi300-10000_cl_pass1_src72.ximg exists [Sat Jun 8 11:18:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0652250601_pi300-10000_cl_pass1_src72.csv [Sat Jun 8 11:18:43 2013] fullrun_pn_xmm0652250601_pi300-10000_cl_pass1_src72_1.ximg exists [Sat Jun 8 11:18:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0652250601_pi300-10000_cl_pass1_src72.csv [Sat Jun 8 11:18:43 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0652250601_pi300-10000_cl_pass1_src72_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0652250601_pi300-10000_cl_pass1_src72.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Jun 8 11:18:45 2013] fullrun_pn_xmm0652250601_pi300-10000_cl_pass1_tfrozen_src72.ximg exists [Sat Jun 8 11:18:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0652250601_pi300-10000_cl_pass1_tfrozen_src72.csv [Sat Jun 8 11:18:45 2013] fullrun_pn_xmm0652250601_pi300-10000_cl_pass1_tfrozen_src72_1.ximg exists [Sat Jun 8 11:18:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0652250601_pi300-10000_cl_pass1_tfrozen_src72.csv [Sat Jun 8 11:18:45 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0652250601_pi300-10000_cl_pass1_tfrozen_src72_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0652250601_pi300-10000_cl_pass1_tfrozen_src72.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Jun 8 11:19:11 2013] Source 76 is offset by -6.043686 and -7.692661 pixels which is larger than 2 X fitted extent = 1.175260 x 1.012901, not incorporating fit results [Sat Jun 8 11:19:11 2013] Vigneting correction estimate = 1.000000 [Sat Jun 8 11:19:11 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat Jun 8 11:19:11 2013] Assessing source extent using major [Sat Jun 8 11:19:11 2013] Source does appear to be extended [Sat Jun 8 11:19:11 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sat Jun 8 11:19:49 2013] XMMSAS src. selection expression = ellipse(27912.261353, 26839.868469, 652.500000, 652.500000, 0.000000, X, Y) [Sat Jun 8 11:19:49 2013] Not overwriting source region fullrun_pn_xmm0652250601_pi300-10000_pass1_cl_src76_src.reg [Sat Jun 8 11:19:49 2013] Extracting stamp from image fullrun_pn_xmm0652250601_pi300-10000_cl_sm2.00.img.gz, (284, 272) - (359, 347) [Sat Jun 8 11:19:49 2013] XMMSAS bgd. selection expression = annulus(27912.261353, 26839.868469, 1087.500000, 2175.000000, X, Y) && !ellipse(25002.776640, 24128.506940, 1384.754440, 1384.754440, 0.000000, X, Y) && !ellipse(27235.791748, 28592.601990, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28036.596375, 24484.111420, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28989.972260, 26380.399719, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27386.390320, 25117.667786, 870.000000, 870.000000, 0.000000, X, Y) [Sat Jun 8 11:19:49 2013] Writing fullrun_pn_xmm0652250601_pi300-10000_pass1_cl_src76.gif [Sat Jun 8 11:20:12 2013] ../../xmm0652250601/products/events/fullrun_pn_xmm0652250601_pi300-10000_pass1_cl_src76_src.evt and ../../xmm0652250601/products/events/fullrun_pn_xmm0652250601_pi300-10000_pass1_cl_src76_bgd.evt exist, delete to re-create [Sat Jun 8 11:20:12 2013] Mean detx,y = (-3118.76, 2040.34) [Sat Jun 8 11:20:12 2013] ../../xmm0652250601/products/images/fullrun_pn_xmm0652250601_pi300-10000_pass1_cl_src76_src.img and ../../xmm0652250601/products/images/fullrun_pn_xmm0652250601_pi300-10000_pass1_cl_src76_bgd.img exist, delete to re-create [Sat Jun 8 11:20:12 2013] ../../xmm0652250601/products/spectra/fullrun_pn_xmm0652250601_pi300-10000_pass1_cl_src76_src_b10.pi.gz and ../../xmm0652250601/products/spectra/fullrun_pn_xmm0652250601_pi300-10000_pass1_cl_src76_bgd.pi exist, delete to re-create [Sat Jun 8 11:20:12 2013] Setting source spectrum file to fullrun_pn_xmm0652250601_pi300-10000_pass1_cl_src76_src_b10.pi.gz [Sat Jun 8 11:20:12 2013] Setting bgd. spectrum file to fullrun_pn_xmm0652250601_pi300-10000_pass1_cl_src76_bgd.pi.gz [Sat Jun 8 11:20:12 2013] ../../xmm0652250601/products/lightcurves/fullrun_pn_xmm0652250601_pi300-10000_pass1_cl_src76_src.lc and ../../xmm0652250601/products/lightcurves/fullrun_pn_xmm0652250601_pi300-10000_pass1_cl_src76_bgd.lc exist, delete to re-create [Sat Jun 8 11:20:35 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done [Sat Jun 8 11:20:35 2013] rmf not generated due to insufficient counts [Sat Jun 8 11:20:35 2013] fullrun_pn_xmm0652250601_pi300-10000_pass1_cl_src76.arf exists, delete to re-create [Sat Jun 8 12:00:16 2013] Updating aperture counts using extracted products [Sat Jun 8 12:00:16 2013] Total counts from fullrun_pn_xmm0652250601_pi300-10000_pass1_cl_src76_src_b10.pi.gz = 814.00 [Sat Jun 8 12:00:16 2013] Total counts from fullrun_pn_xmm0652250601_pi300-10000_pass1_cl_src76_bgd.pi.gz = 3171.00 [Sat Jun 8 12:00:16 2013] Got source and background scale factors 1240562.000000, 5382589.000000 [Sat Jun 8 12:00:16 2013] User source parameters: Position = (321.4, 309.1) = 6 54 2.40 -23 53 25.5 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 83.2 +/- 29.5 Background aperture counts = 730.8 Rate = 0.0009 +/- 0.0003 [Sat Jun 8 12:00:16 2013] Updating counts from extracted products [Sat Jun 8 12:00:16 2013] Set source signif. to 83.16/27.03 = 3.08 [Sat Jun 8 12:00:24 2013] Calculating source flux in energy range 0.30-8.00 [Sat Jun 8 12:00:24 2013] Using photon index=1.80, rate=0.000891, arf fullrun_pn_xmm0652250601_pi300-10000_pass1_cl_src76.arf [Sat Jun 8 12:00:24 2013] Assuming count rate is from the 0.30-10.00 bandpass [Sat Jun 8 12:00:24 2013] Updating source flux to 4e-15 [Sat Jun 8 12:00:54 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Sat Jun 8 12:01:10 2013] xmm0652250601/analysis//spectral/fullrun_pn_xmm0652250601_pi300-10000_pass1_cl_src76_pl.csv not found, spectral fit skipped or did not complete