[Sat Jun 8 11:16:41 2013] Detection parameters: Position = (483.7, 360.0) = 6 53 10.94 -23 49 42.7 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 100.6 +/- 21.9 Background counts = 129.5 Rate = 0.001 +/- 0.0002 [Sat Jun 8 11:16:44 2013] Off-axis axis estimate = 14.15' [Sat Jun 8 11:17:26 2013] Using EEF radius (= 13.51 ")to estimate initial spatial extent for simple fitting [Sat Jun 8 11:17:26 2013] Initial guess for spatial extent in simple fitting = 13.51" [Sat Jun 8 11:17:26 2013] source mask rpix=3.1, npix_max = 51, mask sum = 56, frac = 1.077 [Sat Jun 8 11:17:26 2013] Giving source the simple spatial ID 60 for pass 0, mean size = 13.51" [Sat Jun 8 11:17:28 2013] fullrun_pn_xmm0652250601_pi300-10000_cl_pass0_src60.ximg exists [Sat Jun 8 11:17:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0652250601_pi300-10000_cl_pass0_src60.csv [Sat Jun 8 11:17:28 2013] fullrun_pn_xmm0652250601_pi300-10000_cl_pass0_src60_1.ximg exists [Sat Jun 8 11:17:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0652250601_pi300-10000_cl_pass0_src60.csv [Sat Jun 8 11:17:28 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0652250601_pi300-10000_cl_pass0_src60_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0652250601_pi300-10000_cl_pass0_src60.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Jun 8 11:17:30 2013] fullrun_pn_xmm0652250601_pi300-10000_cl_pass0_tfrozen_src60.ximg exists [Sat Jun 8 11:17:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0652250601_pi300-10000_cl_pass0_tfrozen_src60.csv [Sat Jun 8 11:17:30 2013] fullrun_pn_xmm0652250601_pi300-10000_cl_pass0_tfrozen_src60_1.ximg exists [Sat Jun 8 11:17:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0652250601_pi300-10000_cl_pass0_tfrozen_src60.csv [Sat Jun 8 11:17:30 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0652250601_pi300-10000_cl_pass0_tfrozen_src60_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0652250601_pi300-10000_cl_pass0_tfrozen_src60.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Jun 8 11:17:54 2013] Source 62 is offset by -2.227067 and 8.082137 pixels which is larger than 2 X fitted extent = 1.492166 x 1.492166, not incorporating fit results [Sat Jun 8 11:17:54 2013] Warning, spatial fit 60 centroid is now closest to src. 22 [Sat Jun 8 11:17:55 2013] Vigneting correction estimate = 1.000000 [Sat Jun 8 11:17:55 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat Jun 8 11:17:55 2013] Assessing source extent using major [Sat Jun 8 11:17:55 2013] Source does appear to be extended [Sat Jun 8 11:17:55 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sat Jun 8 11:18:41 2013] Using EEF radius (= 13.51 ")to estimate initial spatial extent for simple fitting [Sat Jun 8 11:18:41 2013] Initial guess for spatial extent in simple fitting = 13.51" [Sat Jun 8 11:18:41 2013] source mask rpix=3.1, npix_max = 51, mask sum = 56, frac = 1.077 [Sat Jun 8 11:18:41 2013] Giving source the simple spatial ID 59 for pass 1, mean size = 13.51" [Sat Jun 8 11:18:42 2013] fullrun_pn_xmm0652250601_pi300-10000_cl_pass1_src59.ximg exists [Sat Jun 8 11:18:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0652250601_pi300-10000_cl_pass1_src59.csv [Sat Jun 8 11:18:42 2013] fullrun_pn_xmm0652250601_pi300-10000_cl_pass1_src59_1.ximg exists [Sat Jun 8 11:18:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0652250601_pi300-10000_cl_pass1_src59.csv [Sat Jun 8 11:18:42 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0652250601_pi300-10000_cl_pass1_src59_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0652250601_pi300-10000_cl_pass1_src59.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Jun 8 11:18:44 2013] fullrun_pn_xmm0652250601_pi300-10000_cl_pass1_tfrozen_src59.ximg exists [Sat Jun 8 11:18:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0652250601_pi300-10000_cl_pass1_tfrozen_src59.csv [Sat Jun 8 11:18:44 2013] fullrun_pn_xmm0652250601_pi300-10000_cl_pass1_tfrozen_src59_1.ximg exists [Sat Jun 8 11:18:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0652250601_pi300-10000_cl_pass1_tfrozen_src59.csv [Sat Jun 8 11:18:44 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0652250601_pi300-10000_cl_pass1_tfrozen_src59_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0652250601_pi300-10000_cl_pass1_tfrozen_src59.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Jun 8 11:19:10 2013] Source 62 is offset by 7.284588 and 6.593792 pixels which is larger than 2 X fitted extent = 0.884290 x 0.884290, not incorporating fit results [Sat Jun 8 11:19:11 2013] Vigneting correction estimate = 1.000000 [Sat Jun 8 11:19:11 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat Jun 8 11:19:11 2013] Assessing source extent using major [Sat Jun 8 11:19:11 2013] Source does appear to be extended [Sat Jun 8 11:19:11 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sat Jun 8 11:19:49 2013] XMMSAS src. selection expression = ellipse(42034.293152, 31273.193909, 652.500000, 652.500000, 0.000000, X, Y) [Sat Jun 8 11:19:49 2013] Not overwriting source region fullrun_pn_xmm0652250601_pi300-10000_pass1_cl_src62_src.reg [Sat Jun 8 11:19:49 2013] Extracting stamp from image fullrun_pn_xmm0652250601_pi300-10000_cl_sm2.00.img.gz, (446, 323) - (521, 398) [Sat Jun 8 11:19:49 2013] XMMSAS bgd. selection expression = annulus(42034.293152, 31273.193909, 1087.500000, 2175.000000, X, Y) && !ellipse(39935.380981, 31631.065308, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41242.571381, 29443.488434, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(42508.377838, 28530.681396, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41750.916565, 33092.178375, 870.000000, 870.000000, 0.000000, X, Y) [Sat Jun 8 11:19:49 2013] Writing fullrun_pn_xmm0652250601_pi300-10000_pass1_cl_src62.gif [Sat Jun 8 11:20:08 2013] ../../xmm0652250601/products/events/fullrun_pn_xmm0652250601_pi300-10000_pass1_cl_src62_src.evt and ../../xmm0652250601/products/events/fullrun_pn_xmm0652250601_pi300-10000_pass1_cl_src62_bgd.evt exist, delete to re-create [Sat Jun 8 11:20:09 2013] Mean detx,y = (-17756.14, 4135.39) [Sat Jun 8 11:20:09 2013] ../../xmm0652250601/products/images/fullrun_pn_xmm0652250601_pi300-10000_pass1_cl_src62_src.img and ../../xmm0652250601/products/images/fullrun_pn_xmm0652250601_pi300-10000_pass1_cl_src62_bgd.img exist, delete to re-create [Sat Jun 8 11:20:09 2013] ../../xmm0652250601/products/spectra/fullrun_pn_xmm0652250601_pi300-10000_pass1_cl_src62_src_b10.pi.gz and ../../xmm0652250601/products/spectra/fullrun_pn_xmm0652250601_pi300-10000_pass1_cl_src62_bgd.pi exist, delete to re-create [Sat Jun 8 11:20:09 2013] Setting source spectrum file to fullrun_pn_xmm0652250601_pi300-10000_pass1_cl_src62_src_b10.pi.gz [Sat Jun 8 11:20:09 2013] Setting bgd. spectrum file to fullrun_pn_xmm0652250601_pi300-10000_pass1_cl_src62_bgd.pi.gz [Sat Jun 8 11:20:09 2013] ../../xmm0652250601/products/lightcurves/fullrun_pn_xmm0652250601_pi300-10000_pass1_cl_src62_src.lc and ../../xmm0652250601/products/lightcurves/fullrun_pn_xmm0652250601_pi300-10000_pass1_cl_src62_bgd.lc exist, delete to re-create [Sat Jun 8 11:20:35 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done [Sat Jun 8 11:20:35 2013] rmf not generated due to insufficient counts [Sat Jun 8 11:20:35 2013] fullrun_pn_xmm0652250601_pi300-10000_pass1_cl_src62.arf exists, delete to re-create [Sat Jun 8 12:00:13 2013] Updating aperture counts using extracted products [Sat Jun 8 12:00:13 2013] Total counts from fullrun_pn_xmm0652250601_pi300-10000_pass1_cl_src62_src_b10.pi.gz = 683.00 [Sat Jun 8 12:00:13 2013] Total counts from fullrun_pn_xmm0652250601_pi300-10000_pass1_cl_src62_bgd.pi.gz = 1473.00 [Sat Jun 8 12:00:13 2013] Got source and background scale factors 1241732.000000, 2599656.000000 [Sat Jun 8 12:00:13 2013] User source parameters: Position = (483.7, 360.0) = 6 53 10.94 -23 49 42.7 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = -20.6 +/- 27.1 Background aperture counts = 703.6 Rate = -0.0002 +/- 0.0003 [Sat Jun 8 12:00:13 2013] Updating counts from extracted products [Sat Jun 8 12:00:13 2013] Set source signif. to -20.58/26.53 = -0.78 [Sat Jun 8 12:00:24 2013] Calculating source flux in energy range 0.30-8.00 [Sat Jun 8 12:00:24 2013] Using photon index=1.80, rate=-0.000221, arf fullrun_pn_xmm0652250601_pi300-10000_pass1_cl_src62.arf [Sat Jun 8 12:00:24 2013] Assuming count rate is from the 0.30-10.00 bandpass [Sat Jun 8 12:00:24 2013] Updated flux is not positive, keeping original flux [Sat Jun 8 12:00:54 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Sat Jun 8 12:01:10 2013] xmm0652250601/analysis//spectral/fullrun_pn_xmm0652250601_pi300-10000_pass1_cl_src62_pl.csv not found, spectral fit skipped or did not complete