[Sat Jun 8 11:16:40 2013] Detection parameters: Position = (339.4, 204.0) = 6 53 56.68 -24 1 5.7 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 272.8 +/- 23.9 Background counts = 162.1 Rate = 0.003 +/- 0.0002 [Sat Jun 8 11:16:44 2013] Off-axis axis estimate = 7.46' [Sat Jun 8 11:17:26 2013] Using EEF radius (= 10.16 ")to estimate initial spatial extent for simple fitting [Sat Jun 8 11:17:26 2013] Initial guess for spatial extent in simple fitting = 10.16" [Sat Jun 8 11:17:26 2013] source mask rpix=2.3, npix_max = 32, mask sum = 18, frac = 0.560 [Sat Jun 8 11:17:26 2013] Giving source the simple spatial ID 32 for pass 0, mean size = 10.16" [Sat Jun 8 11:17:28 2013] fullrun_pn_xmm0652250601_pi300-10000_cl_pass0_src32.ximg exists [Sat Jun 8 11:17:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0652250601_pi300-10000_cl_pass0_src32.csv [Sat Jun 8 11:17:28 2013] fullrun_pn_xmm0652250601_pi300-10000_cl_pass0_src32_1.ximg exists [Sat Jun 8 11:17:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0652250601_pi300-10000_cl_pass0_src32.csv [Sat Jun 8 11:17:28 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0652250601_pi300-10000_cl_pass0_src32_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0652250601_pi300-10000_cl_pass0_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Jun 8 11:17:29 2013] fullrun_pn_xmm0652250601_pi300-10000_cl_pass0_tfrozen_src32.ximg exists [Sat Jun 8 11:17:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0652250601_pi300-10000_cl_pass0_tfrozen_src32.csv [Sat Jun 8 11:17:29 2013] fullrun_pn_xmm0652250601_pi300-10000_cl_pass0_tfrozen_src32_1.ximg exists [Sat Jun 8 11:17:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0652250601_pi300-10000_cl_pass0_tfrozen_src32.csv [Sat Jun 8 11:17:29 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0652250601_pi300-10000_cl_pass0_tfrozen_src32_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0652250601_pi300-10000_cl_pass0_tfrozen_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Jun 8 11:17:54 2013] Source 33 is offset by 9.704849 and -1.625585 pixels which is larger than 2 X fitted extent = 1.670878 x 1.670878, not incorporating fit results [Sat Jun 8 11:17:55 2013] Vigneting correction estimate = 1.000000 [Sat Jun 8 11:17:55 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat Jun 8 11:17:55 2013] Assessing source extent using major [Sat Jun 8 11:17:55 2013] Source does appear to be extended [Sat Jun 8 11:17:55 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sat Jun 8 11:18:41 2013] Using EEF radius (= 10.16 ")to estimate initial spatial extent for simple fitting [Sat Jun 8 11:18:41 2013] Initial guess for spatial extent in simple fitting = 10.16" [Sat Jun 8 11:18:41 2013] source mask rpix=2.3, npix_max = 32, mask sum = 18, frac = 0.560 [Sat Jun 8 11:18:41 2013] Giving source the simple spatial ID 32 for pass 1, mean size = 10.16" [Sat Jun 8 11:18:42 2013] fullrun_pn_xmm0652250601_pi300-10000_cl_pass1_src32.ximg exists [Sat Jun 8 11:18:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0652250601_pi300-10000_cl_pass1_src32.csv [Sat Jun 8 11:18:42 2013] fullrun_pn_xmm0652250601_pi300-10000_cl_pass1_src32_1.ximg exists [Sat Jun 8 11:18:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0652250601_pi300-10000_cl_pass1_src32.csv [Sat Jun 8 11:18:42 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0652250601_pi300-10000_cl_pass1_src32_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0652250601_pi300-10000_cl_pass1_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Jun 8 11:18:44 2013] fullrun_pn_xmm0652250601_pi300-10000_cl_pass1_tfrozen_src32.ximg exists [Sat Jun 8 11:18:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0652250601_pi300-10000_cl_pass1_tfrozen_src32.csv [Sat Jun 8 11:18:44 2013] fullrun_pn_xmm0652250601_pi300-10000_cl_pass1_tfrozen_src32_1.ximg exists [Sat Jun 8 11:18:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0652250601_pi300-10000_cl_pass1_tfrozen_src32.csv [Sat Jun 8 11:18:44 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0652250601_pi300-10000_cl_pass1_tfrozen_src32_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0652250601_pi300-10000_cl_pass1_tfrozen_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Jun 8 11:19:10 2013] Source 33 is offset by 8.804849 and -1.694854 pixels which is larger than 2 X fitted extent = 1.234028 x 1.234028, not incorporating fit results [Sat Jun 8 11:19:11 2013] Vigneting correction estimate = 1.000000 [Sat Jun 8 11:19:11 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat Jun 8 11:19:11 2013] Assessing source extent using major [Sat Jun 8 11:19:11 2013] Source does appear to be extended [Sat Jun 8 11:19:11 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sat Jun 8 11:19:48 2013] XMMSAS src. selection expression = ellipse(29476.163879, 17702.978088, 652.500000, 652.500000, 0.000000, X, Y) [Sat Jun 8 11:19:48 2013] Not overwriting source region fullrun_pn_xmm0652250601_pi300-10000_pass1_cl_src33_src.reg [Sat Jun 8 11:19:48 2013] Extracting stamp from image fullrun_pn_xmm0652250601_pi300-10000_cl_sm2.00.img.gz, (302, 167) - (377, 242) [Sat Jun 8 11:19:48 2013] XMMSAS bgd. selection expression = annulus(29476.163879, 17702.978088, 1087.500000, 2175.000000, X, Y) && !ellipse(30395.289886, 16460.749619, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27231.757200, 18940.994200, 415.317612, 293.195208, 340.963000, X, Y) && !ellipse(30603.563800, 18459.062000, 305.535209, 305.535209, 0.000000, X, Y) && !ellipse(31543.551260, 18745.450000, 439.496013, 439.496013, 0.000000, X, Y) && !ellipse(32242.999115, 15392.890198, 870.000000, 870.000000, 0.000000, X, Y) [Sat Jun 8 11:19:48 2013] Writing fullrun_pn_xmm0652250601_pi300-10000_pass1_cl_src33.gif [Sat Jun 8 11:20:01 2013] ../../xmm0652250601/products/events/fullrun_pn_xmm0652250601_pi300-10000_pass1_cl_src33_src.evt and ../../xmm0652250601/products/events/fullrun_pn_xmm0652250601_pi300-10000_pass1_cl_src33_bgd.evt exist, delete to re-create [Sat Jun 8 11:20:02 2013] Mean detx,y = (-3339.80, -7190.76) [Sat Jun 8 11:20:02 2013] ../../xmm0652250601/products/images/fullrun_pn_xmm0652250601_pi300-10000_pass1_cl_src33_src.img and ../../xmm0652250601/products/images/fullrun_pn_xmm0652250601_pi300-10000_pass1_cl_src33_bgd.img exist, delete to re-create [Sat Jun 8 11:20:02 2013] ../../xmm0652250601/products/spectra/fullrun_pn_xmm0652250601_pi300-10000_pass1_cl_src33_src_b10.pi.gz and ../../xmm0652250601/products/spectra/fullrun_pn_xmm0652250601_pi300-10000_pass1_cl_src33_bgd.pi exist, delete to re-create [Sat Jun 8 11:20:02 2013] Setting source spectrum file to fullrun_pn_xmm0652250601_pi300-10000_pass1_cl_src33_src_b10.pi.gz [Sat Jun 8 11:20:02 2013] Setting bgd. spectrum file to fullrun_pn_xmm0652250601_pi300-10000_pass1_cl_src33_bgd.pi.gz [Sat Jun 8 11:20:02 2013] ../../xmm0652250601/products/lightcurves/fullrun_pn_xmm0652250601_pi300-10000_pass1_cl_src33_src.lc and ../../xmm0652250601/products/lightcurves/fullrun_pn_xmm0652250601_pi300-10000_pass1_cl_src33_bgd.lc exist, delete to re-create [Sat Jun 8 11:20:35 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done [Sat Jun 8 11:20:35 2013] rmf not generated due to insufficient counts [Sat Jun 8 11:20:35 2013] fullrun_pn_xmm0652250601_pi300-10000_pass1_cl_src33.arf exists, delete to re-create [Sat Jun 8 12:00:08 2013] Updating aperture counts using extracted products [Sat Jun 8 12:00:08 2013] Total counts from fullrun_pn_xmm0652250601_pi300-10000_pass1_cl_src33_src_b10.pi.gz = 746.00 [Sat Jun 8 12:00:08 2013] Total counts from fullrun_pn_xmm0652250601_pi300-10000_pass1_cl_src33_bgd.pi.gz = 3517.00 [Sat Jun 8 12:00:08 2013] Got source and background scale factors 995150.000000, 6857002.000000 [Sat Jun 8 12:00:08 2013] User source parameters: Position = (339.4, 204.0) = 6 53 56.68 -24 1 5.7 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 235.6 +/- 28.3 Background aperture counts = 510.4 Rate = 0.003 +/- 0.0003 [Sat Jun 8 12:00:08 2013] Updating counts from extracted products [Sat Jun 8 12:00:08 2013] Set source signif. to 235.58/22.59 = 10.43 [Sat Jun 8 12:00:24 2013] Calculating source flux in energy range 0.30-8.00 [Sat Jun 8 12:00:24 2013] Using photon index=1.80, rate=0.00252, arf fullrun_pn_xmm0652250601_pi300-10000_pass1_cl_src33.arf [Sat Jun 8 12:00:24 2013] Assuming count rate is from the 0.30-10.00 bandpass [Sat Jun 8 12:00:24 2013] Updating source flux to 1.6e-14 [Sat Jun 8 12:00:54 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Sat Jun 8 12:01:10 2013] xmm0652250601/analysis//spectral/fullrun_pn_xmm0652250601_pi300-10000_pass1_cl_src33_pl.csv not found, spectral fit skipped or did not complete