[Sat Jun  8 11:16:46 2013] Detection parameters:
  Position = (250.4, 345.5) = 6 54 24.92 -23 50 36.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 170.4 +/- 18.3
  Background counts = 63.9
  Rate = 0.002 +/- 0.0002

[Sat Jun  8 11:16:49 2013] Off-axis axis estimate = 4.87'
[Sat Jun  8 11:17:32 2013] Using EEF radius (= 8.87 ")to estimate initial spatial extent for simple fitting
[Sat Jun  8 11:17:32 2013] Initial guess for spatial extent in simple fitting = 8.87"
[Sat Jun  8 11:17:32 2013] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.970
[Sat Jun  8 11:17:32 2013] Giving source the simple spatial ID 23 for pass 0, mean size = 8.87"
[Sat Jun  8 11:17:33 2013] fullrun_mos2_xmm0652250601_pi300-10000_cl_pass0_src23.ximg exists
[Sat Jun  8 11:17:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0652250601_pi300-10000_cl_pass0_src23.csv
[Sat Jun  8 11:17:33 2013] fullrun_mos2_xmm0652250601_pi300-10000_cl_pass0_src23_1.ximg exists
[Sat Jun  8 11:17:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0652250601_pi300-10000_cl_pass0_src23.csv
[Sat Jun  8 11:17:33 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0652250601_pi300-10000_cl_pass0_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0652250601_pi300-10000_cl_pass0_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  8 11:17:33 2013] fullrun_mos2_xmm0652250601_pi300-10000_cl_pass0_tfrozen_src23.ximg exists
[Sat Jun  8 11:17:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0652250601_pi300-10000_cl_pass0_tfrozen_src23.csv
[Sat Jun  8 11:17:33 2013] fullrun_mos2_xmm0652250601_pi300-10000_cl_pass0_tfrozen_src23_1.ximg exists
[Sat Jun  8 11:17:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0652250601_pi300-10000_cl_pass0_tfrozen_src23.csv
[Sat Jun  8 11:17:33 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0652250601_pi300-10000_cl_pass0_tfrozen_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0652250601_pi300-10000_cl_pass0_tfrozen_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  8 11:18:20 2013] Warning: source 23 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 8 at 10.662382 pixels away
[Sat Jun  8 11:18:20 2013] Vigneting correction estimate = 1.000000
[Sat Jun  8 11:18:20 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  8 11:18:20 2013] Assessing source extent using major
[Sat Jun  8 11:18:20 2013] Source does appear to be extended
[Sat Jun  8 11:18:20 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  8 11:18:48 2013] Using EEF radius (= 8.87 ")to estimate initial spatial extent for simple fitting
[Sat Jun  8 11:18:48 2013] Initial guess for spatial extent in simple fitting = 8.87"
[Sat Jun  8 11:18:48 2013] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.970
[Sat Jun  8 11:18:48 2013] Giving source the simple spatial ID 23 for pass 1, mean size = 8.87"
[Sat Jun  8 11:18:49 2013] fullrun_mos2_xmm0652250601_pi300-10000_cl_pass1_src23.ximg exists
[Sat Jun  8 11:18:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0652250601_pi300-10000_cl_pass1_src23.csv
[Sat Jun  8 11:18:49 2013] fullrun_mos2_xmm0652250601_pi300-10000_cl_pass1_src23_1.ximg exists
[Sat Jun  8 11:18:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0652250601_pi300-10000_cl_pass1_src23.csv
[Sat Jun  8 11:18:49 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0652250601_pi300-10000_cl_pass1_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0652250601_pi300-10000_cl_pass1_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  8 11:18:50 2013] fullrun_mos2_xmm0652250601_pi300-10000_cl_pass1_tfrozen_src23.ximg exists
[Sat Jun  8 11:18:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0652250601_pi300-10000_cl_pass1_tfrozen_src23.csv
[Sat Jun  8 11:18:50 2013] fullrun_mos2_xmm0652250601_pi300-10000_cl_pass1_tfrozen_src23_1.ximg exists
[Sat Jun  8 11:18:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0652250601_pi300-10000_cl_pass1_tfrozen_src23.csv
[Sat Jun  8 11:18:50 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0652250601_pi300-10000_cl_pass1_tfrozen_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0652250601_pi300-10000_cl_pass1_tfrozen_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  8 11:19:26 2013] Warning: source 23 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 8 at 13.538101 pixels away
[Sat Jun  8 11:19:26 2013] Vigneting correction estimate = 1.000000
[Sat Jun  8 11:19:26 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  8 11:19:26 2013] Assessing source extent using major
[Sat Jun  8 11:19:26 2013] Source does appear to be extended
[Sat Jun  8 11:19:26 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  8 11:21:04 2013] XMMSAS src. selection expression = ellipse(21734.671936, 30005.924530, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun  8 11:21:04 2013] Not overwriting source region fullrun_mos2_xmm0652250601_pi300-10000_pass1_cl_src8_src.reg
[Sat Jun  8 11:21:04 2013] Extracting stamp from image fullrun_mos2_xmm0652250601_pi300-10000_cl_sm2.00.img.gz, (213, 308) - (288, 383)
[Sat Jun  8 11:21:04 2013] XMMSAS bgd. selection expression = annulus(21734.671936, 30005.924530, 1087.500000, 2175.000000, X, Y) && !ellipse(22184.820000, 31668.214400, 542.748816, 542.748816, 0.000000, X, Y) && !ellipse(23925.918600, 29390.345400, 379.072811, 379.072811, 0.000000, X, Y)
[Sat Jun  8 11:21:04 2013] Writing fullrun_mos2_xmm0652250601_pi300-10000_pass1_cl_src8.gif
[Sat Jun  8 11:21:06 2013] ../../xmm0652250601/products/events/fullrun_mos2_xmm0652250601_pi300-10000_pass1_cl_src8_src.evt and ../../xmm0652250601/products/events/fullrun_mos2_xmm0652250601_pi300-10000_pass1_cl_src8_bgd.evt exist, delete to re-create
[Sat Jun  8 11:21:06 2013] Mean detx,y = (-2302.08, -6326.92) 
[Sat Jun  8 11:21:06 2013] ../../xmm0652250601/products/images/fullrun_mos2_xmm0652250601_pi300-10000_pass1_cl_src8_src.img and ../../xmm0652250601/products/images/fullrun_mos2_xmm0652250601_pi300-10000_pass1_cl_src8_bgd.img exist, delete to re-create
[Sat Jun  8 11:21:06 2013] ../../xmm0652250601/products/spectra/fullrun_mos2_xmm0652250601_pi300-10000_pass1_cl_src8_src_b10.pi.gz and ../../xmm0652250601/products/spectra/fullrun_mos2_xmm0652250601_pi300-10000_pass1_cl_src8_bgd.pi exist, delete to re-create
[Sat Jun  8 11:21:06 2013] Setting source spectrum file to fullrun_mos2_xmm0652250601_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Sat Jun  8 11:21:06 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0652250601_pi300-10000_pass1_cl_src8_bgd.pi.gz
[Sat Jun  8 11:21:06 2013] ../../xmm0652250601/products/lightcurves/fullrun_mos2_xmm0652250601_pi300-10000_pass1_cl_src8_src.lc and ../../xmm0652250601/products/lightcurves/fullrun_mos2_xmm0652250601_pi300-10000_pass1_cl_src8_bgd.lc exist, delete to re-create
[Sat Jun  8 11:54:16 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jun  8 11:54:16 2013] rmf not generated due to insufficient counts
[Sat Jun  8 12:00:36 2013] Updating aperture counts using extracted products
[Sat Jun  8 12:00:36 2013] Total counts from fullrun_mos2_xmm0652250601_pi300-10000_pass1_cl_src8_src_b10.pi.gz = 447.00
[Sat Jun  8 12:00:36 2013] Total counts from fullrun_mos2_xmm0652250601_pi300-10000_pass1_cl_src8_bgd.pi.gz = 2165.00
[Sat Jun  8 12:00:36 2013] Got source and background scale factors 1070762.000000, 9184374.000000
[Sat Jun  8 12:00:36 2013] User source parameters:
  Position = (250.4, 345.5) = 6 54 24.92 -23 50 36.8
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 194.6 +/- 22.2
  Background aperture counts = 252.4
  Rate = 0.002 +/- 0.0002

[Sat Jun  8 12:00:36 2013] Updating counts from extracted products
[Sat Jun  8 12:00:36 2013] Set source signif. to 194.59/15.89 = 12.25
[Sat Jun  8 12:00:41 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun  8 12:00:41 2013] Using photon index=1.80, rate=0.00191, arf fullrun_mos2_xmm0652250601_pi300-10000_pass1_cl_src8.arf
[Sat Jun  8 12:00:41 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun  8 12:00:41 2013] Updating source flux to 3.2e-14
[Sat Jun  8 12:00:49 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Jun  8 12:00:54 2013] xmm0652250601/analysis//spectral/fullrun_mos2_xmm0652250601_pi300-10000_pass1_cl_src8_pl.csv not found, spectral fit skipped or did not complete