[Sat Jun  8 11:16:48 2013] Detection parameters:
  Position = (173.3, 194.4) = 6 54 49.42 -24 1 44.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 101.8 +/- 17.1
  Background counts = 57.1
  Rate = 0.001 +/- 0.0002

[Sat Jun  8 11:16:49 2013] Off-axis axis estimate = 11.80'
[Sat Jun  8 11:17:32 2013] Using EEF radius (= 12.33 ")to estimate initial spatial extent for simple fitting
[Sat Jun  8 11:17:32 2013] Initial guess for spatial extent in simple fitting = 12.33"
[Sat Jun  8 11:17:32 2013] source mask rpix=2.8, npix_max = 44, mask sum = 49, frac = 1.102
[Sat Jun  8 11:17:32 2013] Giving source the simple spatial ID 49 for pass 0, mean size = 12.33"
[Sat Jun  8 11:17:33 2013] fullrun_mos2_xmm0652250601_pi300-10000_cl_pass0_src49.ximg exists
[Sat Jun  8 11:17:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0652250601_pi300-10000_cl_pass0_src49.csv
[Sat Jun  8 11:17:33 2013] fullrun_mos2_xmm0652250601_pi300-10000_cl_pass0_src49_1.ximg exists
[Sat Jun  8 11:17:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0652250601_pi300-10000_cl_pass0_src49.csv
[Sat Jun  8 11:17:33 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0652250601_pi300-10000_cl_pass0_src49_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0652250601_pi300-10000_cl_pass0_src49.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  8 11:17:34 2013] fullrun_mos2_xmm0652250601_pi300-10000_cl_pass0_tfrozen_src49.ximg exists
[Sat Jun  8 11:17:34 2013] fullrun_mos2_xmm0652250601_pi300-10000_cl_pass0_tfrozen_src49_1.ximg exists
[Sat Jun  8 11:17:34 2013] Fit fullrun_mos2_xmm0652250601_pi300-10000_cl_pass0_tfrozen_src49 appears to have run properly
[Sat Jun  8 11:18:20 2013] Spatial fit model total counts = 598.262000, observed total counts = 597.000000
[Sat Jun  8 11:18:20 2013] Offset between fit and detection position for source 52 = 0.683187 pixels
[Sat Jun  8 11:18:20 2013] 597.726000 total counts/ 523.899000 bgd. counts: snr = 3.225458
Spatial fit parameters:
  Offset between fit and detection position for source 52 = 0.683187 pixels
  Position = (173.7, 194.9) = 6 54 49.28 -24 1 43.2
  Extent = 7.0 (5.3-9.0)", rotation angle = 0
  Source counts = 73.8 +/- 24.4
  Background counts = 523.9
  Rate = 0.0007 +/- 0.0002
[Sat Jun  8 11:18:20 2013] Vigneting correction estimate = 1.000000
[Sat Jun  8 11:18:20 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  8 11:18:20 2013] Assessing source extent using major axis lower bound
[Sat Jun  8 11:18:20 2013] Source does appear to be extended
[Sat Jun  8 11:18:20 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  8 11:18:48 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jun  8 11:18:48 2013] Initial guess for spatial extent in simple fitting = 6.95"
[Sat Jun  8 11:18:48 2013] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.909
[Sat Jun  8 11:18:48 2013] Giving source the simple spatial ID 47 for pass 1, mean size = 6.95"
[Sat Jun  8 11:18:49 2013] fullrun_mos2_xmm0652250601_pi300-10000_cl_pass1_src47.ximg exists
[Sat Jun  8 11:18:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0652250601_pi300-10000_cl_pass1_src47.csv
[Sat Jun  8 11:18:49 2013] fullrun_mos2_xmm0652250601_pi300-10000_cl_pass1_src47_1.ximg exists
[Sat Jun  8 11:18:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0652250601_pi300-10000_cl_pass1_src47.csv
[Sat Jun  8 11:18:49 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0652250601_pi300-10000_cl_pass1_src47_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0652250601_pi300-10000_cl_pass1_src47.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  8 11:18:50 2013] fullrun_mos2_xmm0652250601_pi300-10000_cl_pass1_tfrozen_src47.ximg exists
[Sat Jun  8 11:18:50 2013] fullrun_mos2_xmm0652250601_pi300-10000_cl_pass1_tfrozen_src47_1.ximg exists
[Sat Jun  8 11:18:50 2013] Fit fullrun_mos2_xmm0652250601_pi300-10000_cl_pass1_tfrozen_src47 appears to have run properly
[Sat Jun  8 11:19:26 2013] Warning, spatial fit 47 centroid is now closest to src. 49
[Sat Jun  8 11:19:26 2013] Vigneting correction estimate = 1.000000
[Sat Jun  8 11:19:26 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  8 11:19:26 2013] Assessing source extent using major axis lower bound
[Sat Jun  8 11:19:26 2013] Source does appear to be extended
[Sat Jun  8 11:19:26 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  8 11:21:05 2013] XMMSAS src. selection expression = ellipse(15064.499400, 16905.452000, 417.075012, 417.075012, 0.000000, X, Y)
[Sat Jun  8 11:21:05 2013] Not overwriting source region fullrun_mos2_xmm0652250601_pi300-10000_pass1_cl_src52_src.reg
[Sat Jun  8 11:21:05 2013] Extracting stamp from image fullrun_mos2_xmm0652250601_pi300-10000_cl_sm2.00.img.gz, (150, 171) - (198, 219)
[Sat Jun  8 11:21:05 2013] XMMSAS bgd. selection expression = annulus(15064.499400, 16905.452000, 695.125020, 1390.250040, X, Y) && !ellipse(15311.289600, 16317.868800, 467.302413, 467.302413, 0.000000, X, Y)
[Sat Jun  8 11:21:05 2013] Writing fullrun_mos2_xmm0652250601_pi300-10000_pass1_cl_src52.gif
[Sat Jun  8 11:23:41 2013] Mean detx,y = (-10916.19, 5604.45) 
[Sat Jun  8 11:23:42 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun  8 11:23:50 2013] Binned source spectrum to 10 counts/bin
[Sat Jun  8 11:23:51 2013] Setting source spectrum file to fullrun_mos2_xmm0652250601_pi300-10000_pass1_cl_src52_src_b10.pi.gz
[Sat Jun  8 11:23:51 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0652250601_pi300-10000_pass1_cl_src52_bgd.pi.gz
[Sat Jun  8 11:56:46 2013] Not generating rmf since there are only 73 counts
[Sat Jun  8 11:56:46 2013] rmf not generated due to insufficient counts
[Sat Jun  8 12:00:39 2013] Updating aperture counts using extracted products
[Sat Jun  8 12:00:39 2013] Total counts from fullrun_mos2_xmm0652250601_pi300-10000_pass1_cl_src52_src_b10.pi.gz = 208.00
[Sat Jun  8 12:00:39 2013] Total counts from fullrun_mos2_xmm0652250601_pi300-10000_pass1_cl_src52_bgd.pi.gz = 849.00
[Sat Jun  8 12:00:39 2013] Got source and background scale factors 542400.000000, 3950750.000000
[Sat Jun  8 12:00:39 2013] User source parameters:
  Position = (173.7, 194.9) = 6 54 49.28 -24 1 43.2
  Extent = 7.0 (5.3-9.0)", rotation angle = 0
  Source aperture counts = 91.4 +/- 15.4
  Background aperture counts = 116.6
  Rate = 0.0009 +/- 0.0002

[Sat Jun  8 12:00:41 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun  8 12:00:41 2013] Using photon index=1.80, rate=0.000724, arf fullrun_mos2_xmm0652250601_pi300-10000_pass1_cl_src52.arf
[Sat Jun  8 12:00:41 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun  8 12:00:41 2013] Updating source flux to 1.9e-14
[Sat Jun  8 12:00:49 2013] Source 52 has fewer than 100.000000 counts, skipping spectral fitting
[Sat Jun  8 12:00:54 2013] xmm0652250601/analysis//spectral/fullrun_mos2_xmm0652250601_pi300-10000_pass1_cl_src52_pl.csv not found, spectral fit skipped or did not complete