[Sat Jun  8 11:16:47 2013] Detection parameters:
  Position = (477.1, 318.5) = 6 53 13.00 -23 52 45.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 40.6 +/- 10.9
  Background counts = 35.4
  Rate = 0.0004 +/- 0.0001

[Sat Jun  8 11:16:49 2013] Off-axis axis estimate = 13.04'
[Sat Jun  8 11:17:32 2013] Using EEF radius (= 12.95 ")to estimate initial spatial extent for simple fitting
[Sat Jun  8 11:17:32 2013] Initial guess for spatial extent in simple fitting = 12.95"
[Sat Jun  8 11:17:32 2013] source mask rpix=3.0, npix_max = 48, mask sum = 41, frac = 0.848
[Sat Jun  8 11:17:32 2013] Giving source the simple spatial ID 62 for pass 0, mean size = 12.95"
[Sat Jun  8 11:17:33 2013] fullrun_mos2_xmm0652250601_pi300-10000_cl_pass0_src62.ximg exists
[Sat Jun  8 11:17:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0652250601_pi300-10000_cl_pass0_src62.csv
[Sat Jun  8 11:17:33 2013] fullrun_mos2_xmm0652250601_pi300-10000_cl_pass0_src62_1.ximg exists
[Sat Jun  8 11:17:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0652250601_pi300-10000_cl_pass0_src62.csv
[Sat Jun  8 11:17:33 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0652250601_pi300-10000_cl_pass0_src62_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0652250601_pi300-10000_cl_pass0_src62.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  8 11:17:34 2013] fullrun_mos2_xmm0652250601_pi300-10000_cl_pass0_tfrozen_src62.ximg exists
[Sat Jun  8 11:17:34 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0652250601_pi300-10000_cl_pass0_tfrozen_src62.csv
[Sat Jun  8 11:17:34 2013] fullrun_mos2_xmm0652250601_pi300-10000_cl_pass0_tfrozen_src62_1.ximg exists
[Sat Jun  8 11:17:34 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0652250601_pi300-10000_cl_pass0_tfrozen_src62.csv
[Sat Jun  8 11:17:34 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0652250601_pi300-10000_cl_pass0_tfrozen_src62_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0652250601_pi300-10000_cl_pass0_tfrozen_src62.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  8 11:17:54 2013] Warning, spatial fit 61 centroid is now closest to src. 61
[Sat Jun  8 11:18:20 2013] Spatial fit model total counts = -860.696000, observed total counts = 325.000000
[Sat Jun  8 11:18:20 2013] Poor agreement between spatial fit and data for source 28
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jun  8 11:18:21 2013] Vigneting correction estimate = 1.000000
[Sat Jun  8 11:18:21 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  8 11:18:21 2013] Assessing source extent using major
[Sat Jun  8 11:18:21 2013] Source does appear to be extended
[Sat Jun  8 11:18:21 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  8 11:18:21 2013] Deleting source due to low Poisson probability 0.9