[Sat Jun  8 11:16:46 2013] Detection parameters:
  Position = (367.2, 160.0) = 6 53 47.82 -24 4 15.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1458.7 +/- 46.8
  Background counts = 51.8
  Rate = 0.01 +/- 0.0004

[Sat Jun  8 11:16:49 2013] Off-axis axis estimate = 11.21'
[Sat Jun  8 11:17:32 2013] Using EEF radius (= 12.03 ")to estimate initial spatial extent for simple fitting
[Sat Jun  8 11:17:32 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jun  8 11:17:32 2013] Initial guess for spatial extent in simple fitting = 12.03"
[Sat Jun  8 11:17:32 2013] source mask rpix=2.8, npix_max = 42, mask sum = 42, frac = 0.984
[Sat Jun  8 11:17:32 2013] Giving source the simple spatial ID 2 for pass 0, mean size = 12.03"
[Sat Jun  8 11:17:32 2013] fullrun_mos2_xmm0652250601_pi300-10000_cl_pass0_src2.ximg exists
[Sat Jun  8 11:17:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0652250601_pi300-10000_cl_pass0_src2.csv
[Sat Jun  8 11:17:32 2013] fullrun_mos2_xmm0652250601_pi300-10000_cl_pass0_src2_1.ximg exists
[Sat Jun  8 11:17:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0652250601_pi300-10000_cl_pass0_src2.csv
[Sat Jun  8 11:17:32 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0652250601_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0652250601_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  8 11:17:33 2013] fullrun_mos2_xmm0652250601_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Sat Jun  8 11:17:33 2013] fullrun_mos2_xmm0652250601_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Sat Jun  8 11:17:33 2013] Fit fullrun_mos2_xmm0652250601_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Sat Jun  8 11:18:20 2013] Spatial fit model total counts = 1726.480000, observed total counts = 1720.000000
[Sat Jun  8 11:18:20 2013] Offset between fit and detection position for source 1 = 0.098112 pixels
[Sat Jun  8 11:18:20 2013] 1747.316000 total counts/ 790.163000 bgd. counts: snr = 34.050463
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.098112 pixels
  Position = (367.1, 160.0) = 6 53 47.86 -24 4 15.1
  Extent = 6.0 (5.6-6.4)", rotation angle = 0
  Source counts = 957.2 +/- 41.8
  Background counts = 790.2
  Rate = 0.009 +/- 0.0004
[Sat Jun  8 11:18:20 2013] Vigneting correction estimate = 1.000000
[Sat Jun  8 11:18:20 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  8 11:18:20 2013] Assessing source extent using major axis lower bound
[Sat Jun  8 11:18:20 2013] Source does appear to be extended
[Sat Jun  8 11:18:20 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  8 11:18:48 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jun  8 11:18:48 2013] Initial guess for spatial extent in simple fitting = 5.97"
[Sat Jun  8 11:18:48 2013] source mask rpix=1.4, npix_max = 14, mask sum = 16, frac = 1.142
[Sat Jun  8 11:18:48 2013] Giving source the simple spatial ID 2 for pass 1, mean size = 5.97"
[Sat Jun  8 11:18:49 2013] fullrun_mos2_xmm0652250601_pi300-10000_cl_pass1_src2.ximg exists
[Sat Jun  8 11:18:49 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0652250601_pi300-10000_cl_pass1_src2.csv
[Sat Jun  8 11:18:49 2013] fullrun_mos2_xmm0652250601_pi300-10000_cl_pass1_src2_1.ximg exists
[Sat Jun  8 11:18:49 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0652250601_pi300-10000_cl_pass1_src2.csv
[Sat Jun  8 11:18:49 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0652250601_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0652250601_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  8 11:18:49 2013] fullrun_mos2_xmm0652250601_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Sat Jun  8 11:18:49 2013] fullrun_mos2_xmm0652250601_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Sat Jun  8 11:18:49 2013] Fit fullrun_mos2_xmm0652250601_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Sat Jun  8 11:19:26 2013] Spatial fit model total counts = 1670.670000, observed total counts = 1668.000000
[Sat Jun  8 11:19:26 2013] Offset between fit and detection position for source 1 = 0.005734 pixels
[Sat Jun  8 11:19:26 2013] 1688.299000 total counts/ 740.637000 bgd. counts: snr = 34.821764
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.005734 pixels
  Position = (367.1, 160.0) = 6 53 47.86 -24 4 15.0
  Extent = 5.9 (5.6-6.3)", rotation angle = 0
  Source counts = 947.7 +/- 41.1
  Background counts = 740.6
  Rate = 0.009 +/- 0.0004
[Sat Jun  8 11:19:26 2013] Vigneting correction estimate = 1.000000
[Sat Jun  8 11:19:26 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  8 11:19:26 2013] Assessing source extent using major axis lower bound
[Sat Jun  8 11:19:26 2013] Source does appear to be extended
[Sat Jun  8 11:19:26 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  8 11:21:04 2013] XMMSAS src. selection expression = ellipse(31893.346020, 13872.962000, 356.143210, 356.143210, 0.000000, X, Y)
[Sat Jun  8 11:21:04 2013] Not overwriting source region fullrun_mos2_xmm0652250601_pi300-10000_pass1_cl_src1_src.reg
[Sat Jun  8 11:21:04 2013] Extracting stamp from image fullrun_mos2_xmm0652250601_pi300-10000_cl_sm2.00.img.gz, (347, 140) - (388, 180)
[Sat Jun  8 11:21:04 2013] XMMSAS bgd. selection expression = annulus(31893.346020, 13872.962000, 593.572017, 1187.144034, X, Y) && !ellipse(31537.871124, 12099.302460, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun  8 11:21:04 2013] Writing fullrun_mos2_xmm0652250601_pi300-10000_pass1_cl_src1.gif
[Sat Jun  8 11:21:05 2013] ../../xmm0652250601/products/events/fullrun_mos2_xmm0652250601_pi300-10000_pass1_cl_src1_src.evt and ../../xmm0652250601/products/events/fullrun_mos2_xmm0652250601_pi300-10000_pass1_cl_src1_bgd.evt exist, delete to re-create
[Sat Jun  8 11:21:05 2013] Mean detx,y = (5229.64, 11194.31) 
[Sat Jun  8 11:21:05 2013] ../../xmm0652250601/products/images/fullrun_mos2_xmm0652250601_pi300-10000_pass1_cl_src1_src.img and ../../xmm0652250601/products/images/fullrun_mos2_xmm0652250601_pi300-10000_pass1_cl_src1_bgd.img exist, delete to re-create
[Sat Jun  8 11:21:05 2013] ../../xmm0652250601/products/spectra/fullrun_mos2_xmm0652250601_pi300-10000_pass1_cl_src1_src_b10.pi.gz and ../../xmm0652250601/products/spectra/fullrun_mos2_xmm0652250601_pi300-10000_pass1_cl_src1_bgd.pi exist, delete to re-create
[Sat Jun  8 11:21:05 2013] Setting source spectrum file to fullrun_mos2_xmm0652250601_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Jun  8 11:21:05 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0652250601_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sat Jun  8 11:21:05 2013] ../../xmm0652250601/products/lightcurves/fullrun_mos2_xmm0652250601_pi300-10000_pass1_cl_src1_src.lc and ../../xmm0652250601/products/lightcurves/fullrun_mos2_xmm0652250601_pi300-10000_pass1_cl_src1_bgd.lc exist, delete to re-create
[Sat Jun  8 12:00:32 2013] Updating aperture counts using extracted products
[Sat Jun  8 12:00:32 2013] Total counts from fullrun_mos2_xmm0652250601_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 1097.00
[Sat Jun  8 12:00:32 2013] Total counts from fullrun_mos2_xmm0652250601_pi300-10000_pass1_cl_src1_bgd.pi.gz = 778.00
[Sat Jun  8 12:00:32 2013] Got source and background scale factors 396800.000000, 3052028.000000
[Sat Jun  8 12:00:32 2013] User source parameters:
  Position = (367.1, 160.0) = 6 53 47.86 -24 4 15.0
  Extent = 5.9 (5.6-6.3)", rotation angle = 0
  Source aperture counts = 995.9 +/- 34.1
  Background aperture counts = 101.1
  Rate = 0.01 +/- 0.0003

[Sat Jun  8 12:00:41 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun  8 12:00:41 2013] Using photon index=1.80, rate=0.00929, arf fullrun_mos2_xmm0652250601_pi300-10000_pass1_cl_src1.arf
[Sat Jun  8 12:00:41 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun  8 12:00:41 2013] Updating source flux to 3.4e-13
[Sat Jun  8 12:00:54 2013] xmm0652250601/analysis//spectral/fullrun_mos2_xmm0652250601_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete