[Sat Jun  8 11:16:45 2013] Detection parameters:
  Position = (203.3, 267.2) = 6 54 39.86 -23 56 30.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 143.3 +/- 17.1
  Background counts = 78.5
  Rate = 0.002 +/- 0.0002

[Sat Jun  8 11:16:46 2013] Off-axis axis estimate = 7.26'
[Sat Jun  8 11:17:31 2013] Using EEF radius (= 10.06 ")to estimate initial spatial extent for simple fitting
[Sat Jun  8 11:17:31 2013] Initial guess for spatial extent in simple fitting = 10.06"
[Sat Jun  8 11:17:31 2013] source mask rpix=2.3, npix_max = 31, mask sum = 22, frac = 0.696
[Sat Jun  8 11:17:31 2013] Giving source the simple spatial ID 19 for pass 0, mean size = 10.06"
[Sat Jun  8 11:17:31 2013] fullrun_mos1_xmm0652250601_pi300-10000_cl_pass0_src19.ximg exists
[Sat Jun  8 11:17:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0652250601_pi300-10000_cl_pass0_src19.csv
[Sat Jun  8 11:17:31 2013] fullrun_mos1_xmm0652250601_pi300-10000_cl_pass0_src19_1.ximg exists
[Sat Jun  8 11:17:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0652250601_pi300-10000_cl_pass0_src19.csv
[Sat Jun  8 11:17:31 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0652250601_pi300-10000_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0652250601_pi300-10000_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  8 11:17:32 2013] fullrun_mos1_xmm0652250601_pi300-10000_cl_pass0_tfrozen_src19.ximg exists
[Sat Jun  8 11:17:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0652250601_pi300-10000_cl_pass0_tfrozen_src19.csv
[Sat Jun  8 11:17:32 2013] fullrun_mos1_xmm0652250601_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists
[Sat Jun  8 11:17:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0652250601_pi300-10000_cl_pass0_tfrozen_src19.csv
[Sat Jun  8 11:17:32 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0652250601_pi300-10000_cl_pass0_tfrozen_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0652250601_pi300-10000_cl_pass0_tfrozen_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  8 11:18:05 2013] Warning: source 19 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 20 at 15.321373 pixels away
[Sat Jun  8 11:18:05 2013] Vigneting correction estimate = 1.000000
[Sat Jun  8 11:18:05 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  8 11:18:05 2013] Assessing source extent using major
[Sat Jun  8 11:18:05 2013] Source does appear to be extended
[Sat Jun  8 11:18:05 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  8 11:18:46 2013] Using EEF radius (= 10.06 ")to estimate initial spatial extent for simple fitting
[Sat Jun  8 11:18:46 2013] Initial guess for spatial extent in simple fitting = 10.06"
[Sat Jun  8 11:18:46 2013] source mask rpix=2.3, npix_max = 31, mask sum = 22, frac = 0.696
[Sat Jun  8 11:18:46 2013] Giving source the simple spatial ID 19 for pass 1, mean size = 10.06"
[Sat Jun  8 11:18:47 2013] fullrun_mos1_xmm0652250601_pi300-10000_cl_pass1_src19.ximg exists
[Sat Jun  8 11:18:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0652250601_pi300-10000_cl_pass1_src19.csv
[Sat Jun  8 11:18:47 2013] fullrun_mos1_xmm0652250601_pi300-10000_cl_pass1_src19_1.ximg exists
[Sat Jun  8 11:18:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0652250601_pi300-10000_cl_pass1_src19.csv
[Sat Jun  8 11:18:47 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0652250601_pi300-10000_cl_pass1_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0652250601_pi300-10000_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  8 11:18:47 2013] fullrun_mos1_xmm0652250601_pi300-10000_cl_pass1_tfrozen_src19.ximg exists
[Sat Jun  8 11:18:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0652250601_pi300-10000_cl_pass1_tfrozen_src19.csv
[Sat Jun  8 11:18:47 2013] fullrun_mos1_xmm0652250601_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists
[Sat Jun  8 11:18:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0652250601_pi300-10000_cl_pass1_tfrozen_src19.csv
[Sat Jun  8 11:18:47 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0652250601_pi300-10000_cl_pass1_tfrozen_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0652250601_pi300-10000_cl_pass1_tfrozen_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  8 11:19:17 2013] Warning: source 19 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 20 at 12.266242 pixels away
[Sat Jun  8 11:19:17 2013] Vigneting correction estimate = 1.000000
[Sat Jun  8 11:19:17 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  8 11:19:17 2013] Assessing source extent using major
[Sat Jun  8 11:19:17 2013] Source does appear to be extended
[Sat Jun  8 11:19:17 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  8 11:20:56 2013] XMMSAS src. selection expression = ellipse(17641.427872, 23195.806244, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun  8 11:20:56 2013] Not overwriting source region fullrun_mos1_xmm0652250601_pi300-10000_pass1_cl_src20_src.reg
[Sat Jun  8 11:20:56 2013] Extracting stamp from image fullrun_mos1_xmm0652250601_pi300-10000_cl_sm2.00.img.gz, (166, 230) - (241, 305)
[Sat Jun  8 11:20:56 2013] XMMSAS bgd. selection expression = annulus(17641.427872, 23195.806244, 1087.500000, 2175.000000, X, Y) && !ellipse(16170.676200, 22243.431200, 369.430411, 369.430411, 0.000000, X, Y)
[Sat Jun  8 11:20:56 2013] Writing fullrun_mos1_xmm0652250601_pi300-10000_pass1_cl_src20.gif
[Sat Jun  8 11:20:57 2013] ../../xmm0652250601/products/events/fullrun_mos1_xmm0652250601_pi300-10000_pass1_cl_src20_src.evt and ../../xmm0652250601/products/events/fullrun_mos1_xmm0652250601_pi300-10000_pass1_cl_src20_bgd.evt exist, delete to re-create
[Sat Jun  8 11:20:58 2013] Mean detx,y = (-14.06, 7225.56) 
[Sat Jun  8 11:20:58 2013] ../../xmm0652250601/products/images/fullrun_mos1_xmm0652250601_pi300-10000_pass1_cl_src20_src.img and ../../xmm0652250601/products/images/fullrun_mos1_xmm0652250601_pi300-10000_pass1_cl_src20_bgd.img exist, delete to re-create
[Sat Jun  8 11:20:58 2013] ../../xmm0652250601/products/spectra/fullrun_mos1_xmm0652250601_pi300-10000_pass1_cl_src20_src_b10.pi.gz and ../../xmm0652250601/products/spectra/fullrun_mos1_xmm0652250601_pi300-10000_pass1_cl_src20_bgd.pi exist, delete to re-create
[Sat Jun  8 11:20:58 2013] Setting source spectrum file to fullrun_mos1_xmm0652250601_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Sat Jun  8 11:20:58 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0652250601_pi300-10000_pass1_cl_src20_bgd.pi.gz
[Sat Jun  8 11:20:58 2013] ../../xmm0652250601/products/lightcurves/fullrun_mos1_xmm0652250601_pi300-10000_pass1_cl_src20_src.lc and ../../xmm0652250601/products/lightcurves/fullrun_mos1_xmm0652250601_pi300-10000_pass1_cl_src20_bgd.lc exist, delete to re-create
[Sat Jun  8 11:21:03 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jun  8 11:21:03 2013] rmf not generated due to insufficient counts
[Sat Jun  8 11:21:03 2013] fullrun_mos1_xmm0652250601_pi300-10000_pass1_cl_src20.arf exists, delete to re-create
[Sat Jun  8 12:00:27 2013] Updating aperture counts using extracted products
[Sat Jun  8 12:00:27 2013] Total counts from fullrun_mos1_xmm0652250601_pi300-10000_pass1_cl_src20_src_b10.pi.gz = 444.00
[Sat Jun  8 12:00:27 2013] Total counts from fullrun_mos1_xmm0652250601_pi300-10000_pass1_cl_src20_bgd.pi.gz = 2586.00
[Sat Jun  8 12:00:27 2013] Got source and background scale factors 1107352.000000, 9399602.000000
[Sat Jun  8 12:00:27 2013] User source parameters:
  Position = (203.3, 267.2) = 6 54 39.86 -23 56 30.0
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 139.3 +/- 22.1
  Background aperture counts = 304.7
  Rate = 0.001 +/- 0.0002

[Sat Jun  8 12:00:27 2013] Updating counts from extracted products
[Sat Jun  8 12:00:27 2013] Set source signif. to 139.35/17.45 = 7.98
[Sat Jun  8 12:00:32 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun  8 12:00:32 2013] Using photon index=1.80, rate=0.00138, arf fullrun_mos1_xmm0652250601_pi300-10000_pass1_cl_src20.arf
[Sat Jun  8 12:00:32 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun  8 12:00:32 2013] Updating source flux to 2.2e-14
[Sat Jun  8 12:00:45 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Jun  8 12:00:49 2013] xmm0652250601/analysis//spectral/fullrun_mos1_xmm0652250601_pi300-10000_pass1_cl_src20_pl.csv not found, spectral fit skipped or did not complete