[Sat Jun  8 11:16:45 2013] Detection parameters:
  Position = (310.7, 89.5) = 6 54 5.77 -24 9 21.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 67.9 +/- 14.5
  Background counts = 43.9
  Rate = 0.0006 +/- 0.0001

[Sat Jun  8 11:16:46 2013] Off-axis axis estimate = 15.17'
[Sat Jun  8 11:17:31 2013] Using EEF radius (= 14.02 ")to estimate initial spatial extent for simple fitting
[Sat Jun  8 11:17:31 2013] Initial guess for spatial extent in simple fitting = 14.02"
[Sat Jun  8 11:17:31 2013] source mask rpix=3.2, npix_max = 55, mask sum = 49, frac = 0.884
[Sat Jun  8 11:17:31 2013] Giving source the simple spatial ID 44 for pass 0, mean size = 14.02"
[Sat Jun  8 11:17:31 2013] fullrun_mos1_xmm0652250601_pi300-10000_cl_pass0_src44.ximg exists
[Sat Jun  8 11:17:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0652250601_pi300-10000_cl_pass0_src44.csv
[Sat Jun  8 11:17:31 2013] fullrun_mos1_xmm0652250601_pi300-10000_cl_pass0_src44_1.ximg exists
[Sat Jun  8 11:17:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0652250601_pi300-10000_cl_pass0_src44.csv
[Sat Jun  8 11:17:31 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0652250601_pi300-10000_cl_pass0_src44_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0652250601_pi300-10000_cl_pass0_src44.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  8 11:17:32 2013] fullrun_mos1_xmm0652250601_pi300-10000_cl_pass0_tfrozen_src44.ximg exists
[Sat Jun  8 11:17:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0652250601_pi300-10000_cl_pass0_tfrozen_src44.csv
[Sat Jun  8 11:17:32 2013] fullrun_mos1_xmm0652250601_pi300-10000_cl_pass0_tfrozen_src44_1.ximg exists
[Sat Jun  8 11:17:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0652250601_pi300-10000_cl_pass0_tfrozen_src44.csv
[Sat Jun  8 11:17:32 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0652250601_pi300-10000_cl_pass0_tfrozen_src44_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0652250601_pi300-10000_cl_pass0_tfrozen_src44.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  8 11:18:05 2013] Spatial fit model total counts = 546.746000, observed total counts = 482.000000
[Sat Jun  8 11:18:05 2013] Poor agreement between spatial fit and data for source 17
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jun  8 11:18:05 2013] Vigneting correction estimate = 1.000000
[Sat Jun  8 11:18:05 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  8 11:18:05 2013] Assessing source extent using major
[Sat Jun  8 11:18:05 2013] Source does appear to be extended
[Sat Jun  8 11:18:05 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  8 11:18:46 2013] Using EEF radius (= 14.02 ")to estimate initial spatial extent for simple fitting
[Sat Jun  8 11:18:46 2013] Initial guess for spatial extent in simple fitting = 14.02"
[Sat Jun  8 11:18:46 2013] source mask rpix=3.2, npix_max = 55, mask sum = 49, frac = 0.884
[Sat Jun  8 11:18:46 2013] Giving source the simple spatial ID 42 for pass 1, mean size = 14.02"
[Sat Jun  8 11:18:47 2013] fullrun_mos1_xmm0652250601_pi300-10000_cl_pass1_src42.ximg exists
[Sat Jun  8 11:18:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0652250601_pi300-10000_cl_pass1_src42.csv
[Sat Jun  8 11:18:47 2013] fullrun_mos1_xmm0652250601_pi300-10000_cl_pass1_src42_1.ximg exists
[Sat Jun  8 11:18:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0652250601_pi300-10000_cl_pass1_src42.csv
[Sat Jun  8 11:18:47 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0652250601_pi300-10000_cl_pass1_src42_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0652250601_pi300-10000_cl_pass1_src42.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  8 11:18:48 2013] fullrun_mos1_xmm0652250601_pi300-10000_cl_pass1_tfrozen_src42.ximg exists
[Sat Jun  8 11:18:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0652250601_pi300-10000_cl_pass1_tfrozen_src42.csv
[Sat Jun  8 11:18:48 2013] fullrun_mos1_xmm0652250601_pi300-10000_cl_pass1_tfrozen_src42_1.ximg exists
[Sat Jun  8 11:18:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0652250601_pi300-10000_cl_pass1_tfrozen_src42.csv
[Sat Jun  8 11:18:48 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0652250601_pi300-10000_cl_pass1_tfrozen_src42_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0652250601_pi300-10000_cl_pass1_tfrozen_src42.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  8 11:19:17 2013] Warning: source 42 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 17 at 15.721196 pixels away
[Sat Jun  8 11:19:17 2013] Vigneting correction estimate = 1.000000
[Sat Jun  8 11:19:17 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  8 11:19:17 2013] Assessing source extent using major
[Sat Jun  8 11:19:17 2013] Source does appear to be extended
[Sat Jun  8 11:19:17 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  8 11:20:56 2013] XMMSAS src. selection expression = ellipse(26986.402191, 7737.773659, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun  8 11:20:56 2013] Not overwriting source region fullrun_mos1_xmm0652250601_pi300-10000_pass1_cl_src17_src.reg
[Sat Jun  8 11:20:56 2013] Extracting stamp from image fullrun_mos1_xmm0652250601_pi300-10000_cl_sm2.00.img.gz, (273, 52) - (348, 127)
[Sat Jun  8 11:20:56 2013] XMMSAS bgd. selection expression = annulus(26986.402191, 7737.773659, 1087.500000, 2175.000000, X, Y) && !ellipse(25702.444000, 9300.318500, 2138.960062, 2138.960062, 0.000000, X, Y) && !ellipse(24826.857117, 8132.800201, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24696.686340, 7479.070923, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun  8 11:20:56 2013] Writing fullrun_mos1_xmm0652250601_pi300-10000_pass1_cl_src17.gif
[Sat Jun  8 11:20:58 2013] ../../xmm0652250601/products/events/fullrun_mos1_xmm0652250601_pi300-10000_pass1_cl_src17_src.evt and ../../xmm0652250601/products/events/fullrun_mos1_xmm0652250601_pi300-10000_pass1_cl_src17_bgd.evt exist, delete to re-create
[Sat Jun  8 11:20:58 2013] Mean detx,y = (16687.20, 439.09) 
[Sat Jun  8 11:20:58 2013] ../../xmm0652250601/products/images/fullrun_mos1_xmm0652250601_pi300-10000_pass1_cl_src17_src.img and ../../xmm0652250601/products/images/fullrun_mos1_xmm0652250601_pi300-10000_pass1_cl_src17_bgd.img exist, delete to re-create
[Sat Jun  8 11:20:58 2013] ../../xmm0652250601/products/spectra/fullrun_mos1_xmm0652250601_pi300-10000_pass1_cl_src17_src_b10.pi.gz and ../../xmm0652250601/products/spectra/fullrun_mos1_xmm0652250601_pi300-10000_pass1_cl_src17_bgd.pi exist, delete to re-create
[Sat Jun  8 11:20:58 2013] Setting source spectrum file to fullrun_mos1_xmm0652250601_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Sat Jun  8 11:20:58 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0652250601_pi300-10000_pass1_cl_src17_bgd.pi.gz
[Sat Jun  8 11:20:58 2013] ../../xmm0652250601/products/lightcurves/fullrun_mos1_xmm0652250601_pi300-10000_pass1_cl_src17_src.lc and ../../xmm0652250601/products/lightcurves/fullrun_mos1_xmm0652250601_pi300-10000_pass1_cl_src17_bgd.lc exist, delete to re-create
[Sat Jun  8 11:21:03 2013] Not generating rmf since there are only 67 counts
[Sat Jun  8 11:21:03 2013] rmf not generated due to insufficient counts
[Sat Jun  8 11:21:03 2013] fullrun_mos1_xmm0652250601_pi300-10000_pass1_cl_src17.arf exists, delete to re-create
[Sat Jun  8 12:00:30 2013] Updating aperture counts using extracted products
[Sat Jun  8 12:00:30 2013] Total counts from fullrun_mos1_xmm0652250601_pi300-10000_pass1_cl_src17_src_b10.pi.gz = 278.00
[Sat Jun  8 12:00:31 2013] Total counts from fullrun_mos1_xmm0652250601_pi300-10000_pass1_cl_src17_bgd.pi.gz = 429.00
[Sat Jun  8 12:00:31 2013] Got source and background scale factors 1239420.000000, 2042197.000000
[Sat Jun  8 12:00:31 2013] User source parameters:
  Position = (310.7, 89.5) = 6 54 5.77 -24 9 21.0
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 17.6 +/- 17.7
  Background aperture counts = 260.4
  Rate = 0.0002 +/- 0.0002

[Sat Jun  8 12:00:31 2013] Updating counts from extracted products
[Sat Jun  8 12:00:31 2013] Set source signif. to 17.64/16.14 = 1.09
[Sat Jun  8 12:00:32 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun  8 12:00:32 2013] Using photon index=1.80, rate=0.000175, arf fullrun_mos1_xmm0652250601_pi300-10000_pass1_cl_src17.arf
[Sat Jun  8 12:00:32 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun  8 12:00:32 2013] Updating source flux to 5.8e-15
[Sat Jun  8 12:00:45 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Jun  8 12:00:49 2013] xmm0652250601/analysis//spectral/fullrun_mos1_xmm0652250601_pi300-10000_pass1_cl_src17_pl.csv not found, spectral fit skipped or did not complete