[Sat Jun  8 11:16:45 2013] Detection parameters:
  Position = (207.6, 318.8) = 6 54 38.50 -23 52 45.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 201.6 +/- 20.1
  Background counts = 72.9
  Rate = 0.003 +/- 0.0003

[Sat Jun  8 11:16:46 2013] Off-axis axis estimate = 6.75'
[Sat Jun  8 11:17:31 2013] Using EEF radius (= 9.80 ")to estimate initial spatial extent for simple fitting
[Sat Jun  8 11:17:31 2013] Initial guess for spatial extent in simple fitting = 9.80"
[Sat Jun  8 11:17:31 2013] source mask rpix=2.3, npix_max = 30, mask sum = 24, frac = 0.791
[Sat Jun  8 11:17:31 2013] Giving source the simple spatial ID 9 for pass 0, mean size = 9.80"
[Sat Jun  8 11:17:31 2013] fullrun_mos1_xmm0652250601_pi300-10000_cl_pass0_src9.ximg exists
[Sat Jun  8 11:17:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0652250601_pi300-10000_cl_pass0_src9.csv
[Sat Jun  8 11:17:31 2013] fullrun_mos1_xmm0652250601_pi300-10000_cl_pass0_src9_1.ximg exists
[Sat Jun  8 11:17:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0652250601_pi300-10000_cl_pass0_src9.csv
[Sat Jun  8 11:17:31 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0652250601_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0652250601_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  8 11:17:32 2013] fullrun_mos1_xmm0652250601_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Sat Jun  8 11:17:32 2013] fullrun_mos1_xmm0652250601_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Sat Jun  8 11:17:32 2013] Fit fullrun_mos1_xmm0652250601_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly
[Sat Jun  8 11:18:05 2013] Spatial fit model total counts = 609.213000, observed total counts = 554.000000
[Sat Jun  8 11:18:05 2013] Offset between fit and detection position for source 16 = 0.297287 pixels
[Sat Jun  8 11:18:05 2013] 612.353000 total counts/ 473.492000 bgd. counts: snr = 6.381518
Spatial fit parameters:
  Offset between fit and detection position for source 16 = 0.297287 pixels
  Position = (207.6, 318.5) = 6 54 38.48 -23 52 45.4
  Extent = 4.8 (4.0-5.9)", rotation angle = 0
  Source counts = 138.9 +/- 24.7
  Background counts = 473.5
  Rate = 0.001 +/- 0.0002
[Sat Jun  8 11:18:05 2013] Vigneting correction estimate = 1.000000
[Sat Jun  8 11:18:05 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  8 11:18:05 2013] Assessing source extent using major axis lower bound
[Sat Jun  8 11:18:05 2013] Source does appear to be extended
[Sat Jun  8 11:18:05 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  8 11:18:46 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jun  8 11:18:46 2013] Initial guess for spatial extent in simple fitting = 4.80"
[Sat Jun  8 11:18:46 2013] source mask rpix=1.1, npix_max = 10, mask sum = 9, frac = 0.874
[Sat Jun  8 11:18:46 2013] Giving source the simple spatial ID 9 for pass 1, mean size = 4.80"
[Sat Jun  8 11:18:47 2013] fullrun_mos1_xmm0652250601_pi300-10000_cl_pass1_src9.ximg exists
[Sat Jun  8 11:18:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0652250601_pi300-10000_cl_pass1_src9.csv
[Sat Jun  8 11:18:47 2013] fullrun_mos1_xmm0652250601_pi300-10000_cl_pass1_src9_1.ximg exists
[Sat Jun  8 11:18:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0652250601_pi300-10000_cl_pass1_src9.csv
[Sat Jun  8 11:18:47 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0652250601_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0652250601_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  8 11:18:47 2013] fullrun_mos1_xmm0652250601_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Sat Jun  8 11:18:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0652250601_pi300-10000_cl_pass1_tfrozen_src9.csv
[Sat Jun  8 11:18:47 2013] fullrun_mos1_xmm0652250601_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Sat Jun  8 11:18:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0652250601_pi300-10000_cl_pass1_tfrozen_src9.csv
[Sat Jun  8 11:18:47 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0652250601_pi300-10000_cl_pass1_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0652250601_pi300-10000_cl_pass1_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  8 11:19:17 2013] Spatial fit model total counts = 614.351000, observed total counts = 557.000000
[Sat Jun  8 11:19:17 2013] Poor agreement between spatial fit and data for source 16
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jun  8 11:19:17 2013] Vigneting correction estimate = 1.000000
[Sat Jun  8 11:19:17 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  8 11:19:17 2013] Assessing source extent using major axis lower bound
[Sat Jun  8 11:19:17 2013] Source does appear to be extended
[Sat Jun  8 11:19:17 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  8 11:20:56 2013] XMMSAS src. selection expression = ellipse(18016.073200, 27664.062000, 288.210008, 288.210008, 0.000000, X, Y)
[Sat Jun  8 11:20:56 2013] Not overwriting source region fullrun_mos1_xmm0652250601_pi300-10000_pass1_cl_src16_src.reg
[Sat Jun  8 11:20:56 2013] Extracting stamp from image fullrun_mos1_xmm0652250601_pi300-10000_cl_sm2.00.img.gz, (191, 302) - (224, 335)
[Sat Jun  8 11:20:56 2013] XMMSAS bgd. selection expression = annulus(18016.073200, 27664.062000, 480.350014, 960.700028, X, Y)
[Sat Jun  8 11:20:56 2013] Writing fullrun_mos1_xmm0652250601_pi300-10000_pass1_cl_src16.gif
[Sat Jun  8 11:20:57 2013] ../../xmm0652250601/products/events/fullrun_mos1_xmm0652250601_pi300-10000_pass1_cl_src16_src.evt and ../../xmm0652250601/products/events/fullrun_mos1_xmm0652250601_pi300-10000_pass1_cl_src16_bgd.evt exist, delete to re-create
[Sat Jun  8 11:20:57 2013] Mean detx,y = (-4398.27, 6143.86) 
[Sat Jun  8 11:20:57 2013] ../../xmm0652250601/products/images/fullrun_mos1_xmm0652250601_pi300-10000_pass1_cl_src16_src.img and ../../xmm0652250601/products/images/fullrun_mos1_xmm0652250601_pi300-10000_pass1_cl_src16_bgd.img exist, delete to re-create
[Sat Jun  8 11:20:57 2013] ../../xmm0652250601/products/spectra/fullrun_mos1_xmm0652250601_pi300-10000_pass1_cl_src16_src_b10.pi.gz and ../../xmm0652250601/products/spectra/fullrun_mos1_xmm0652250601_pi300-10000_pass1_cl_src16_bgd.pi exist, delete to re-create
[Sat Jun  8 11:20:57 2013] Setting source spectrum file to fullrun_mos1_xmm0652250601_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Sat Jun  8 11:20:57 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0652250601_pi300-10000_pass1_cl_src16_bgd.pi.gz
[Sat Jun  8 11:20:57 2013] ../../xmm0652250601/products/lightcurves/fullrun_mos1_xmm0652250601_pi300-10000_pass1_cl_src16_src.lc and ../../xmm0652250601/products/lightcurves/fullrun_mos1_xmm0652250601_pi300-10000_pass1_cl_src16_bgd.lc exist, delete to re-create
[Sat Jun  8 11:21:03 2013] fullrun_mos1_xmm0652250601_pi300-10000_pass1_cl_src16.rmf exists, delete to re-create
[Sat Jun  8 11:21:03 2013] fullrun_mos1_xmm0652250601_pi300-10000_pass1_cl_src16.arf exists, delete to re-create
[Sat Jun  8 12:00:26 2013] Updating aperture counts using extracted products
[Sat Jun  8 12:00:26 2013] Total counts from fullrun_mos1_xmm0652250601_pi300-10000_pass1_cl_src16_src_b10.pi.gz = 197.00
[Sat Jun  8 12:00:26 2013] Total counts from fullrun_mos1_xmm0652250601_pi300-10000_pass1_cl_src16_bgd.pi.gz = 448.00
[Sat Jun  8 12:00:26 2013] Got source and background scale factors 255560.000000, 1942822.000000
[Sat Jun  8 12:00:26 2013] User source parameters:
  Position = (207.6, 318.5) = 6 54 38.48 -23 52 45.4
  Extent = 4.8 (4.0-5.9)", rotation angle = 0
  Source aperture counts = 138.1 +/- 15.1
  Background aperture counts = 58.9
  Rate = 0.001 +/- 0.0001

[Sat Jun  8 12:00:32 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun  8 12:00:32 2013] Using photon index=1.80, rate=0.00138, arf fullrun_mos1_xmm0652250601_pi300-10000_pass1_cl_src16.arf
[Sat Jun  8 12:00:32 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun  8 12:00:32 2013] Updating source flux to 2.6e-14
[Sat Jun  8 12:00:45 2013] Flag p found in src. 16 procflags, skipping spectral fitting
[Sat Jun  8 12:00:49 2013] xmm0652250601/analysis//spectral/fullrun_mos1_xmm0652250601_pi300-10000_pass1_cl_src16_pl.csv not found, spectral fit skipped or did not complete