[Sat Jun  8 11:16:44 2013] Detection parameters:
  Position = (161.0, 132.1) = 6 54 53.33 -24 6 16.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 141.9 +/- 19.3
  Background counts = 70.1
  Rate = 0.001 +/- 0.0002

[Sat Jun  8 11:16:46 2013] Off-axis axis estimate = 15.64'
[Sat Jun  8 11:17:31 2013] Using EEF radius (= 14.25 ")to estimate initial spatial extent for simple fitting
[Sat Jun  8 11:17:31 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jun  8 11:17:31 2013] Initial guess for spatial extent in simple fitting = 14.25"
[Sat Jun  8 11:17:31 2013] source mask rpix=3.3, npix_max = 57, mask sum = 54, frac = 0.947
[Sat Jun  8 11:17:31 2013] Giving source the simple spatial ID 32 for pass 0, mean size = 14.25"
[Sat Jun  8 11:17:31 2013] fullrun_mos1_xmm0652250601_pi300-10000_cl_pass0_src32.ximg exists
[Sat Jun  8 11:17:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0652250601_pi300-10000_cl_pass0_src32.csv
[Sat Jun  8 11:17:31 2013] fullrun_mos1_xmm0652250601_pi300-10000_cl_pass0_src32_1.ximg exists
[Sat Jun  8 11:17:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0652250601_pi300-10000_cl_pass0_src32.csv
[Sat Jun  8 11:17:31 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0652250601_pi300-10000_cl_pass0_src32_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0652250601_pi300-10000_cl_pass0_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  8 11:17:32 2013] fullrun_mos1_xmm0652250601_pi300-10000_cl_pass0_tfrozen_src32.ximg exists
[Sat Jun  8 11:17:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0652250601_pi300-10000_cl_pass0_tfrozen_src32.csv
[Sat Jun  8 11:17:32 2013] fullrun_mos1_xmm0652250601_pi300-10000_cl_pass0_tfrozen_src32_1.ximg exists
[Sat Jun  8 11:17:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0652250601_pi300-10000_cl_pass0_tfrozen_src32.csv
[Sat Jun  8 11:17:32 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0652250601_pi300-10000_cl_pass0_tfrozen_src32_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0652250601_pi300-10000_cl_pass0_tfrozen_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  8 11:18:05 2013] Warning: source 32 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 11 at 17.363169 pixels away
[Sat Jun  8 11:18:05 2013] Vigneting correction estimate = 1.000000
[Sat Jun  8 11:18:05 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  8 11:18:05 2013] Assessing source extent using major
[Sat Jun  8 11:18:05 2013] Source does appear to be extended
[Sat Jun  8 11:18:05 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  8 11:18:46 2013] Using EEF radius (= 14.25 ")to estimate initial spatial extent for simple fitting
[Sat Jun  8 11:18:46 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jun  8 11:18:46 2013] Initial guess for spatial extent in simple fitting = 14.25"
[Sat Jun  8 11:18:46 2013] source mask rpix=3.3, npix_max = 57, mask sum = 54, frac = 0.947
[Sat Jun  8 11:18:46 2013] Giving source the simple spatial ID 30 for pass 1, mean size = 14.25"
[Sat Jun  8 11:18:47 2013] fullrun_mos1_xmm0652250601_pi300-10000_cl_pass1_src30.ximg exists
[Sat Jun  8 11:18:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0652250601_pi300-10000_cl_pass1_src30.csv
[Sat Jun  8 11:18:47 2013] fullrun_mos1_xmm0652250601_pi300-10000_cl_pass1_src30_1.ximg exists
[Sat Jun  8 11:18:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0652250601_pi300-10000_cl_pass1_src30.csv
[Sat Jun  8 11:18:47 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0652250601_pi300-10000_cl_pass1_src30_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0652250601_pi300-10000_cl_pass1_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  8 11:18:48 2013] fullrun_mos1_xmm0652250601_pi300-10000_cl_pass1_tfrozen_src30.ximg exists
[Sat Jun  8 11:18:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0652250601_pi300-10000_cl_pass1_tfrozen_src30.csv
[Sat Jun  8 11:18:48 2013] fullrun_mos1_xmm0652250601_pi300-10000_cl_pass1_tfrozen_src30_1.ximg exists
[Sat Jun  8 11:18:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0652250601_pi300-10000_cl_pass1_tfrozen_src30.csv
[Sat Jun  8 11:18:48 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0652250601_pi300-10000_cl_pass1_tfrozen_src30_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0652250601_pi300-10000_cl_pass1_tfrozen_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  8 11:19:17 2013] Warning: source 30 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 11 at 18.172139 pixels away
[Sat Jun  8 11:19:17 2013] Vigneting correction estimate = 1.000000
[Sat Jun  8 11:19:17 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  8 11:19:17 2013] Assessing source extent using major
[Sat Jun  8 11:19:17 2013] Source does appear to be extended
[Sat Jun  8 11:19:17 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  8 11:20:56 2013] XMMSAS src. selection expression = ellipse(13961.818787, 11440.113113, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun  8 11:20:56 2013] Not overwriting source region fullrun_mos1_xmm0652250601_pi300-10000_pass1_cl_src11_src.reg
[Sat Jun  8 11:20:56 2013] Extracting stamp from image fullrun_mos1_xmm0652250601_pi300-10000_cl_sm2.00.img.gz, (124, 95) - (199, 170)
[Sat Jun  8 11:20:56 2013] XMMSAS bgd. selection expression = annulus(13961.818787, 11440.113113, 1087.500000, 2175.000000, X, Y) && !ellipse(16865.617691, 10291.853432, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun  8 11:20:56 2013] Writing fullrun_mos1_xmm0652250601_pi300-10000_pass1_cl_src11.gif
[Sat Jun  8 11:20:58 2013] ../../xmm0652250601/products/events/fullrun_mos1_xmm0652250601_pi300-10000_pass1_cl_src11_src.evt and ../../xmm0652250601/products/events/fullrun_mos1_xmm0652250601_pi300-10000_pass1_cl_src11_bgd.evt exist, delete to re-create
[Sat Jun  8 11:20:58 2013] Mean detx,y = (10940.95, 12660.96) 
[Sat Jun  8 11:20:58 2013] ../../xmm0652250601/products/images/fullrun_mos1_xmm0652250601_pi300-10000_pass1_cl_src11_src.img and ../../xmm0652250601/products/images/fullrun_mos1_xmm0652250601_pi300-10000_pass1_cl_src11_bgd.img exist, delete to re-create
[Sat Jun  8 11:20:58 2013] ../../xmm0652250601/products/spectra/fullrun_mos1_xmm0652250601_pi300-10000_pass1_cl_src11_src_b10.pi.gz and ../../xmm0652250601/products/spectra/fullrun_mos1_xmm0652250601_pi300-10000_pass1_cl_src11_bgd.pi exist, delete to re-create
[Sat Jun  8 11:20:58 2013] Setting source spectrum file to fullrun_mos1_xmm0652250601_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Sat Jun  8 11:20:58 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0652250601_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Sat Jun  8 11:20:58 2013] ../../xmm0652250601/products/lightcurves/fullrun_mos1_xmm0652250601_pi300-10000_pass1_cl_src11_src.lc and ../../xmm0652250601/products/lightcurves/fullrun_mos1_xmm0652250601_pi300-10000_pass1_cl_src11_bgd.lc exist, delete to re-create
[Sat Jun  8 11:21:03 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jun  8 11:21:03 2013] rmf not generated due to insufficient counts
[Sat Jun  8 11:21:03 2013] fullrun_mos1_xmm0652250601_pi300-10000_pass1_cl_src11.arf exists, delete to re-create
[Sat Jun  8 12:00:29 2013] Updating aperture counts using extracted products
[Sat Jun  8 12:00:29 2013] Total counts from fullrun_mos1_xmm0652250601_pi300-10000_pass1_cl_src11_src_b10.pi.gz = 365.00
[Sat Jun  8 12:00:29 2013] Total counts from fullrun_mos1_xmm0652250601_pi300-10000_pass1_cl_src11_bgd.pi.gz = 1553.00
[Sat Jun  8 12:00:29 2013] Got source and background scale factors 1044838.000000, 5372109.000000
[Sat Jun  8 12:00:29 2013] User source parameters:
  Position = (161.0, 132.1) = 6 54 53.33 -24 6 16.8
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 63.0 +/- 20.1
  Background aperture counts = 302.0
  Rate = 0.0006 +/- 0.0002

[Sat Jun  8 12:00:29 2013] Updating counts from extracted products
[Sat Jun  8 12:00:29 2013] Set source signif. to 62.95/17.38 = 3.62
[Sat Jun  8 12:00:32 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun  8 12:00:32 2013] Using photon index=1.80, rate=0.000625, arf fullrun_mos1_xmm0652250601_pi300-10000_pass1_cl_src11.arf
[Sat Jun  8 12:00:32 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun  8 12:00:32 2013] Updating source flux to 2e-14
[Sat Jun  8 12:00:45 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Jun  8 12:00:49 2013] xmm0652250601/analysis//spectral/fullrun_mos1_xmm0652250601_pi300-10000_pass1_cl_src11_pl.csv not found, spectral fit skipped or did not complete