[Mon Jun 25 05:53:24 2012] Detection parameters:
  Position = (287.2, 278.8) = 6 54 12.97 -23 55 42.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 65895.5 +/- 301.5
  Background counts = 138.6
  Rate = 0.7 +/- 0.003

[Mon Jun 25 05:53:28 2012] Off-axis axis estimate = 1.64'
[Mon Jun 25 06:00:09 2012] Using EEF radius (= 7.25 ")to estimate initial spatial extent for simple fitting
[Mon Jun 25 06:00:09 2012] Initial guess for spatial extent in simple fitting = 7.25"
[Mon Jun 25 06:00:09 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.852
[Mon Jun 25 06:00:09 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 7.25"
[Mon Jun 25 08:48:52 2012] fullrun_pn_xmm0652250501_pi300-10000_cl_pass0_src3.ximg exists
[Mon Jun 25 08:48:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0652250501_pi300-10000_cl_pass0_src3.csv
[Mon Jun 25 08:48:52 2012] fullrun_pn_xmm0652250501_pi300-10000_cl_pass0_src3_1.ximg exists
[Mon Jun 25 08:48:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0652250501_pi300-10000_cl_pass0_src3.csv
[Mon Jun 25 08:48:52 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0652250501_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0652250501_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 25 08:48:54 2012] fullrun_pn_xmm0652250501_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Mon Jun 25 08:48:54 2012] fullrun_pn_xmm0652250501_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Mon Jun 25 08:48:54 2012] Fit fullrun_pn_xmm0652250501_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Mon Jun 25 11:49:54 2012] Spatial fit model total counts = 59376.500000, observed total counts = 59337.000000
[Mon Jun 25 11:49:54 2012] Offset between fit and detection position for source 3 = 0.212488 pixels
[Mon Jun 25 11:49:54 2012] 59484.500000 total counts/ 11858.800000 bgd. counts: snr = 437.341812
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.212488 pixels
  Position = (287.2, 278.5) = 6 54 12.98 -23 55 42.2
  Extent = 6.0 (6.0-6.0)", rotation angle = 0
  Source counts = 47625.7 +/- 243.9
  Background counts = 11858.8
  Rate = 0.5 +/- 0.003
[Mon Jun 25 11:49:54 2012] Vigneting correction estimate = 1.000000
[Mon Jun 25 11:49:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 25 11:49:54 2012] Assessing source extent using major axis lower bound
[Mon Jun 25 11:49:54 2012] Source does appear to be extended
[Mon Jun 25 11:49:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 25 11:50:31 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jun 25 11:50:31 2012] Initial guess for spatial extent in simple fitting = 6.00"
[Mon Jun 25 11:50:31 2012] source mask rpix=1.4, npix_max = 14, mask sum = 12, frac = 0.849
[Mon Jun 25 11:50:31 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 6.00"
[Mon Jun 25 15:00:06 2012] fullrun_pn_xmm0652250501_pi300-10000_cl_pass1_src3.ximg exists
[Mon Jun 25 15:00:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0652250501_pi300-10000_cl_pass1_src3.csv
[Mon Jun 25 15:00:06 2012] fullrun_pn_xmm0652250501_pi300-10000_cl_pass1_src3_1.ximg exists
[Mon Jun 25 15:00:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0652250501_pi300-10000_cl_pass1_src3.csv
[Mon Jun 25 15:00:06 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0652250501_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0652250501_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 25 15:00:07 2012] fullrun_pn_xmm0652250501_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Mon Jun 25 15:00:07 2012] fullrun_pn_xmm0652250501_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Mon Jun 25 15:00:07 2012] Fit fullrun_pn_xmm0652250501_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Mon Jun 25 18:02:18 2012] Spatial fit model total counts = 59337.000000, observed total counts = 59337.000000
[Mon Jun 25 18:02:18 2012] Offset between fit and detection position for source 3 = 0.000060 pixels
[Mon Jun 25 18:02:18 2012] 59444.300000 total counts/ 11831.200000 bgd. counts: snr = 437.735794
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.000060 pixels
  Position = (287.2, 278.5) = 6 54 12.98 -23 55 42.2
  Extent = 6.0 (6.0-6.0)", rotation angle = 0
  Source counts = 47613.1 +/- 243.8
  Background counts = 11831.2
  Rate = 0.5 +/- 0.003
[Mon Jun 25 18:02:19 2012] Vigneting correction estimate = 1.000000
[Mon Jun 25 18:02:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 25 18:02:19 2012] Assessing source extent using major axis lower bound
[Mon Jun 25 18:02:19 2012] Source does appear to be extended
[Mon Jun 25 18:02:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 25 18:02:58 2012] Counts = 47613.100000, rescaling region sizes by 3.000000
[Mon Jun 25 18:02:58 2012] XMMSAS src. selection expression = ellipse(24934.897120, 24184.705000, 1081.778431, 1081.778431, 0.000000, X, Y)
[Mon Jun 25 18:02:58 2012] Writing source region out to fullrun_pn_xmm0652250501_pi300-10000_pass1_cl_src3_src.reg
[Mon Jun 25 18:02:58 2012] Extracting stamp from image fullrun_pn_xmm0652250501_pi300-10000_cl_sm2.00.img.gz, (225, 216) - (349, 341)
[Mon Jun 25 18:02:58 2012] XMMSAS bgd. selection expression = annulus(24934.897120, 24184.705000, 5408.892156, 10817.784311, X, Y) && !ellipse(31830.752716, 13941.527725, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27164.642273, 28657.613037, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21693.200378, 30388.763824, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22217.277320, 31663.869600, 415.670412, 415.670412, 0.000000, X, Y) && !ellipse(17923.863400, 27702.785000, 402.780012, 402.780012, 0.000000, X, Y) && !ellipse(13352.382034, 26667.047302, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27970.260468, 24506.461456, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25294.707794, 22870.249207, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16631.716248, 21490.564560, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30322.396057, 16493.188766, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25750.796692, 14115.109558, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14287.681152, 33548.166382, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21584.507200, 33142.908400, 390.528811, 390.528811, 0.000000, X, Y) && !ellipse(22170.552078, 20834.466995, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26418.844543, 18773.568207, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20720.681732, 18479.876831, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14998.874260, 16913.664400, 386.551211, 386.551211, 0.000000, X, Y) && !ellipse(36060.890000, 14214.414000, 614.605618, 614.605618, 0.000000, X, Y) && !ellipse(30528.997162, 18494.406479, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23831.827200, 29450.663200, 316.291209, 316.291209, 0.000000, X, Y) && !ellipse(24275.704000, 27913.794200, 486.551214, 486.551214, 0.000000, X, Y) && !ellipse(27158.987800, 18994.963000, 312.365609, 312.365609, 0.000000, X, Y) && !ellipse(31478.085175, 18806.538361, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17948.665207, 15774.695358, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20058.417862, 14990.203232, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30470.058167, 35771.740143, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25374.183441, 35743.793304, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31744.700562, 35562.510559, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22173.723511, 35124.550201, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23444.314640, 35058.336400, 1843.048053, 348.252810, 78.889515, X, Y) && !ellipse(34779.553040, 34323.095093, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14154.299118, 34081.346710, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23511.073320, 34256.540800, 661.862419, 661.862419, 0.000000, X, Y) && !ellipse(28829.342987, 33396.086304, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23694.320600, 32993.056000, 923.496027, 923.496027, 0.000000, X, Y) && !ellipse(32895.902679, 32545.436157, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23726.641600, 32758.358000, 901.008026, 901.008026, 0.000000, X, Y) && !ellipse(19905.524017, 32488.841553, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31303.301941, 32370.785675, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22797.281800, 32368.449200, 630.572818, 630.572818, 0.000000, X, Y) && !ellipse(23934.471600, 31464.659600, 503.395214, 503.395214, 0.000000, X, Y) && !ellipse(23952.583000, 31203.193000, 1614.816046, 354.693610, 84.235200, X, Y) && !ellipse(17063.970947, 31197.971619, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24028.765000, 30552.625600, 511.121615, 511.121615, 0.000000, X, Y) && !ellipse(24035.589980, 30253.828800, 876.528025, 876.528025, 0.000000, X, Y) && !ellipse(24356.136353, 28572.822021, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22870.318600, 28005.455400, 366.012011, 366.012011, 0.000000, X, Y) && !ellipse(25176.715637, 27256.992157, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31977.379364, 27187.289673, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24568.339569, 27357.381470, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27859.006775, 26911.246277, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33722.319400, 26898.291800, 391.598411, 391.598411, 0.000000, X, Y) && !ellipse(32966.648590, 26517.555878, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28901.204010, 26415.507172, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24668.550995, 26407.159760, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22342.150604, 26130.781830, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20915.136078, 26058.525208, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32241.793732, 25970.009186, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25567.328857, 25534.048065, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20902.722488, 25635.703827, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30089.352000, 25289.819800, 522.692815, 522.692815, 0.000000, X, Y) && !ellipse(32472.157349, 25253.530945, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27396.577667, 25146.405823, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19055.385600, 23181.130000, 409.576812, 409.576812, 0.000000, X, Y) && !ellipse(35479.429870, 22675.272702, 494.300839, 292.726400, 313.039166, X, Y) && !ellipse(33850.916718, 22348.355408, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16150.382004, 22292.042236, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14523.388016, 22316.033081, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19715.452820, 20634.034200, 321.581609, 321.581609, 0.000000, X, Y) && !ellipse(21349.682068, 19113.546036, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15839.679855, 19012.215515, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19772.676971, 18638.578552, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25047.351990, 17769.789246, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21926.769943, 17881.769089, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33237.169525, 17790.782562, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29466.791626, 17713.010117, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26765.912628, 16336.709305, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20142.312805, 16393.931824, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15275.387894, 16324.905045, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18901.231308, 15980.133560, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33246.395752, 15974.088058, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27958.857117, 14558.450333, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21773.111450, 14491.140030, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19660.128952, 14347.579941, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28029.061401, 13615.472870, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19196.380295, 13634.979370, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25358.386017, 13517.919128, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27138.519440, 12802.435196, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jun 25 18:02:58 2012] Writing fullrun_pn_xmm0652250501_pi300-10000_pass1_cl_src3.gif
[Mon Jun 25 18:11:40 2012] Mean detx,y = (154.23, -96.37) 
[Mon Jun 25 18:11:55 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 25 18:15:07 2012] Binned source spectrum to 10 counts/bin
[Mon Jun 25 18:15:07 2012] Setting source spectrum file to fullrun_pn_xmm0652250501_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Mon Jun 25 18:15:07 2012] Setting bgd. spectrum file to fullrun_pn_xmm0652250501_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Tue Jun 26 01:42:54 2012] Updating aperture counts using extracted products
[Tue Jun 26 01:42:54 2012] Error reading totcts from fullrun_pn_xmm0652250501_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Tue Jun 26 01:43:02 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jun 26 01:43:02 2012] Using photon index=1.80, rate=0.497, arf fullrun_pn_xmm0652250501_pi300-10000_pass1_cl_src3.arf
[Tue Jun 26 01:43:02 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 26 01:43:02 2012] Updating source flux to 1.2e-12
[Tue Jun 26 01:53:17 2012] Reading fit data from xmm0652250501/analysis//spectral/fullrun_pn_xmm0652250501_pi300-10000_pass1_cl_src3_pl.csv
[Tue Jun 26 01:53:17 2012] Spectral fit parameter nH value = 3.90968e+21
[Tue Jun 26 01:53:17 2012] Spectral fit parameter PhoIndex value = 3.63416
[Tue Jun 26 01:53:17 2012] Failed to get F(0.3-8.0) from xmm0652250501/analysis//spectral/fullrun_pn_xmm0652250501_pi300-10000_pass1_cl_src3_pl.csv, possibly due to different flux energy range selected
[Tue Jun 26 01:53:17 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jun 26 01:53:17 2012] Using Nh = 3.9e+21, photon index=3.63, rate=0.497, arf fullrun_pn_xmm0652250501_pi300-10000_pass1_cl_src3.arf
[Tue Jun 26 01:53:17 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 26 01:53:17 2012] Updating source flux to 9.3e-13