[Thu May 2 11:36:32 2013] Detection parameters: Position = (385.7, 125.9) = 6 53 44.03 -24 6 35.5 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 381.6 +/- 30.1 Background counts = 114.3 Rate = 0.004 +/- 0.0003 [Thu May 2 11:36:35 2013] Off-axis axis estimate = 14.02' [Thu May 2 11:37:17 2013] Using EEF radius (= 13.44 ")to estimate initial spatial extent for simple fitting [Thu May 2 11:37:17 2013] Initial guess for spatial extent in simple fitting = 13.44" [Thu May 2 11:37:17 2013] source mask rpix=3.1, npix_max = 51, mask sum = 49, frac = 0.951 [Thu May 2 11:37:17 2013] Giving source the simple spatial ID 52 for pass 0, mean size = 13.44" [Thu May 2 11:37:19 2013] fullrun_pn_xmm0652250101_pi300-10000_cl_pass0_src52.ximg exists [Thu May 2 11:37:19 2013] fullrun_pn_xmm0652250101_pi300-10000_cl_pass0_src52_1.ximg exists [Thu May 2 11:37:19 2013] Fit fullrun_pn_xmm0652250101_pi300-10000_cl_pass0_src52 appears to have run properly [Thu May 2 11:37:21 2013] fullrun_pn_xmm0652250101_pi300-10000_cl_pass0_tfrozen_src52.ximg exists [Thu May 2 11:37:21 2013] fullrun_pn_xmm0652250101_pi300-10000_cl_pass0_tfrozen_src52_1.ximg exists [Thu May 2 11:37:21 2013] Fit fullrun_pn_xmm0652250101_pi300-10000_cl_pass0_tfrozen_src52 appears to have run properly [Thu May 2 11:37:44 2013] Source 62 is offset by -3.336402 and 1.221819 pixels which is larger than 2 X fitted extent = 1.572262 x 1.572262, not incorporating fit results [Thu May 2 11:37:44 2013] Spatial fit model total counts = 2102.280000, observed total counts = 2086.000000 [Thu May 2 11:37:44 2013] Offset between fit and detection position for source 62 = 2.518035 pixels [Thu May 2 11:37:44 2013] Warning, changing simple spatial fit ID from 52 to 51 [Thu May 2 11:37:44 2013] 2015.993000 total counts/ 938.793000 bgd. counts: snr = 35.156969 Spatial fit parameters: Offset between fit and detection position for source 62 = 2.518035 pixels Position = (384.2, 123.9) = 6 53 44.52 -24 6 42.4 Extent = 26.3 (23.4-52.7)", rotation angle = 0 Source counts = 1077.2 +/- 44.9 Background counts = 938.8 Rate = 0.01 +/- 0.0004 [Thu May 2 11:37:44 2013] Vigneting correction estimate = 1.000000 [Thu May 2 11:37:44 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Thu May 2 11:37:44 2013] Assessing source extent using major axis lower bound [Thu May 2 11:37:44 2013] Source does appear to be extended [Thu May 2 11:37:44 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Thu May 2 11:37:44 2013] Source is confused with source 17 [Thu May 2 11:38:23 2013] Using previous fit value to estimate initial spatial extent for simple fitting [Thu May 2 11:38:23 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Thu May 2 11:38:23 2013] Initial guess for spatial extent in simple fitting = 26.35" [Thu May 2 11:38:23 2013] source mask rpix=6.1, npix_max = 171, mask sum = 169, frac = 0.983 [Thu May 2 11:38:23 2013] Giving source the simple spatial ID 51 for pass 1, mean size = 26.35" [Thu May 2 11:38:26 2013] fullrun_pn_xmm0652250101_pi300-10000_cl_pass1_src51.ximg exists [Thu May 2 11:38:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0652250101_pi300-10000_cl_pass1_src51.csv [Thu May 2 11:38:26 2013] fullrun_pn_xmm0652250101_pi300-10000_cl_pass1_src51_1.ximg exists [Thu May 2 11:38:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0652250101_pi300-10000_cl_pass1_src51.csv [Thu May 2 11:38:26 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0652250101_pi300-10000_cl_pass1_src51_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0652250101_pi300-10000_cl_pass1_src51.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Thu May 2 11:38:27 2013] fullrun_pn_xmm0652250101_pi300-10000_cl_pass1_tfrozen_src51.ximg exists [Thu May 2 11:38:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0652250101_pi300-10000_cl_pass1_tfrozen_src51.csv [Thu May 2 11:38:27 2013] fullrun_pn_xmm0652250101_pi300-10000_cl_pass1_tfrozen_src51_1.ximg exists [Thu May 2 11:38:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0652250101_pi300-10000_cl_pass1_tfrozen_src51.csv [Thu May 2 11:38:27 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0652250101_pi300-10000_cl_pass1_tfrozen_src51_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0652250101_pi300-10000_cl_pass1_tfrozen_src51.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Thu May 2 11:38:53 2013] Warning, spatial fit 51 centroid is now closest to src. 58 [Thu May 2 11:38:54 2013] Vigneting correction estimate = 1.000000 [Thu May 2 11:38:54 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Thu May 2 11:38:54 2013] Assessing source extent using major axis lower bound [Thu May 2 11:38:54 2013] Source does appear to be extended [Thu May 2 11:38:54 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Thu May 2 11:39:32 2013] Counts = 1077.200000, rescaling region sizes by 2.000000 [Thu May 2 11:39:32 2013] XMMSAS src. selection expression = ellipse(33375.136000, 10727.548000, 3161.436091, 3161.436091, 0.000000, X, Y) [Thu May 2 11:39:32 2013] Not overwriting source region fullrun_pn_xmm0652250101_pi300-10000_pass1_cl_src62_src.reg [Thu May 2 11:39:32 2013] Extracting stamp from image fullrun_pn_xmm0652250101_pi300-10000_cl_sm2.00.img.gz, (202, 0) - (566, 306) [Thu May 2 11:39:32 2013] XMMSAS bgd. selection expression = annulus(33375.136000, 10727.548000, 10538.120303, 21076.240606, X, Y) && !ellipse(25538.326000, 23952.433400, 1385.040040, 1385.040040, 0.000000, X, Y) && !ellipse(32435.815308, 13703.244156, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32733.574188, 26871.341187, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27743.882050, 28573.968994, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17412.187332, 10071.120934, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18557.942657, 15537.763199, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22282.487800, 30151.175200, 421.552812, 421.552812, 0.000000, X, Y) && !ellipse(40437.869600, 31430.737400, 618.872018, 286.168808, 90.000000, X, Y) && !ellipse(26668.004160, 9076.205520, 577.484017, 303.271209, 344.039304, X, Y) && !ellipse(36391.240784, 28143.267487, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18508.044037, 27548.694916, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13969.674895, 26408.315397, 507.158777, 405.830477, 90.000000, X, Y) && !ellipse(25855.277405, 22686.980499, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22755.473660, 20660.597200, 423.016012, 423.016012, 0.000000, X, Y) && !ellipse(32745.166046, 9967.131401, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30923.914185, 16245.494446, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24382.083954, 7978.392990, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22805.509800, 31422.616400, 388.238411, 388.238411, 0.000000, X, Y) && !ellipse(24447.599457, 29198.447815, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38377.069946, 28764.470001, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16335.337600, 28030.239600, 422.368812, 422.368812, 0.000000, X, Y) && !ellipse(42006.736603, 27544.136230, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34339.712921, 26668.924408, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33127.469025, 25077.582153, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38721.363525, 24461.503845, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19968.233154, 23989.336090, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22156.792389, 22853.774750, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37109.635956, 22661.463013, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17258.202271, 21205.638763, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(44865.722595, 21340.092102, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39026.299400, 20551.443600, 483.440014, 483.440014, 0.000000, X, Y) && !ellipse(20336.046310, 20470.530182, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32034.961639, 18635.814667, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27026.269480, 18555.571000, 435.277613, 435.277613, 0.000000, X, Y) && !ellipse(34086.330200, 9986.070389, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21330.595062, 18229.876617, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22553.817505, 17667.212189, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30064.836975, 17508.121506, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15585.634705, 16679.545273, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15848.872894, 16124.114471, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33867.202667, 15766.066513, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20614.001328, 15315.739029, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20640.252930, 14719.463257, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35958.940948, 14585.396225, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28562.018707, 14314.000458, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22419.013702, 14246.787064, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36553.364200, 14051.259800, 388.520811, 388.520811, 0.000000, X, Y) && !ellipse(32064.897095, 11896.821960, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36813.560364, 11715.358673, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21381.602158, 11782.651718, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31224.572357, 10768.635628, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33310.135040, 23591.092316, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27380.276400, 7385.666000, 2253.840065, 2253.840065, 0.000000, X, Y) && !ellipse(33565.538239, 32335.218903, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23481.696000, 27816.044000, 903.296026, 587.960817, 90.000000, X, Y) && !ellipse(29566.302124, 26202.733124, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33457.454651, 22941.048218, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16755.968964, 22014.079254, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15125.281830, 22082.367935, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33808.394800, 17624.545400, 398.566411, 398.566411, 0.000000, X, Y) && !ellipse(20739.859009, 16153.100754, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26451.280000, 13833.470000, 405.282412, 405.282412, 0.000000, X, Y) && !ellipse(25975.935211, 13270.511551, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21159.507629, 10875.833099, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20777.856960, 33147.429400, 1981.952057, 354.556010, 61.051000, X, Y) && !ellipse(21337.386627, 32210.262604, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21449.988600, 31808.636000, 1180.904034, 1180.904034, 0.000000, X, Y) && !ellipse(32409.299360, 31256.597240, 577.530417, 577.530417, 0.000000, X, Y) && !ellipse(21801.938000, 31148.408000, 1555.592045, 1555.592045, 0.000000, X, Y) && !ellipse(17678.518631, 30937.802643, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23145.235800, 28575.327400, 1469.272042, 458.025613, 244.299000, X, Y) && !ellipse(24853.309620, 27703.472600, 325.227209, 325.227209, 0.000000, X, Y) && !ellipse(23925.426880, 27176.966919, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36050.733276, 26226.742554, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32756.455231, 25767.268494, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24180.050000, 26696.262000, 1185.648034, 1185.648034, 0.000000, X, Y) && !ellipse(22932.055900, 25925.215600, 376.028011, 376.028011, 0.000000, X, Y) && !ellipse(21528.119949, 25820.185883, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16565.199799, 25746.492889, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25689.564000, 24818.006000, 1074.992031, 1074.992031, 0.000000, X, Y) && !ellipse(20388.796432, 25046.098816, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28001.528748, 24884.869507, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27968.327606, 23569.852081, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19715.143880, 22962.197000, 392.691211, 392.691211, 0.000000, X, Y) && !ellipse(18219.208710, 22963.621277, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36090.218872, 22393.174957, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34472.530762, 22130.802307, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25295.206940, 20803.749634, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24308.802490, 19115.359421, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16477.368774, 18707.508423, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20382.514633, 18314.836227, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29882.006348, 16277.277802, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27333.318939, 16062.139450, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30032.124359, 15751.098785, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26259.048950, 15546.334961, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26666.834900, 11302.457809, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18425.414215, 11032.130692, 870.000000, 870.000000, 0.000000, X, Y) [Thu May 2 11:39:32 2013] Writing fullrun_pn_xmm0652250101_pi300-10000_pass1_cl_src62.gif [Thu May 2 11:49:54 2013] Mean detx,y = (-538.62, -14502.33) [Thu May 2 11:50:08 2013] Setting backscal keywords in source and bgd. spectrum [Thu May 2 11:54:41 2013] Binned source spectrum to 10 counts/bin [Thu May 2 11:54:41 2013] Setting source spectrum file to fullrun_pn_xmm0652250101_pi300-10000_pass1_cl_src62_src_b10.pi.gz [Thu May 2 11:54:41 2013] Setting bgd. spectrum file to fullrun_pn_xmm0652250101_pi300-10000_pass1_cl_src62_bgd.pi.gz [Thu May 2 14:59:29 2013] Updating aperture counts using extracted products [Thu May 2 14:59:29 2013] Total counts from fullrun_pn_xmm0652250101_pi300-10000_pass1_cl_src62_src_b10.pi.gz = 14601.00 [Thu May 2 14:59:29 2013] Total counts from fullrun_pn_xmm0652250101_pi300-10000_pass1_cl_src62_bgd.pi.gz = 160125.00 [Thu May 2 14:59:30 2013] Got source and background scale factors 15067570.000000, 252519515.000000 [Thu May 2 14:59:30 2013] User source parameters: Position = (384.2, 123.9) = 6 53 44.52 -24 6 42.4 Extent = 26.3 (23.4-52.7)", rotation angle = 0 Source aperture counts = 5046.5 +/- 121.8 Background aperture counts = 9554.5 Rate = 0.05 +/- 0.001 [Thu May 2 14:59:41 2013] Calculating source flux in energy range 0.30-8.00 [Thu May 2 14:59:41 2013] Using photon index=1.80, rate=0.0103, arf fullrun_pn_xmm0652250101_pi300-10000_pass1_cl_src62.arf [Thu May 2 14:59:41 2013] Assuming count rate is from the 0.30-10.00 bandpass [Thu May 2 14:59:41 2013] Updating source flux to 9.5e-14 [Thu May 2 15:00:21 2013] Flag b found in src. 62 procflags, skipping spectral fitting [Thu May 2 15:00:21 2013] Flag c found in src. 62 procflags, skipping spectral fitting [Thu May 2 15:00:38 2013] xmm0652250101/analysis//spectral/fullrun_pn_xmm0652250101_pi300-10000_pass1_cl_src62_pl.csv not found, spectral fit skipped or did not complete