[Thu May 2 11:36:34 2013] Detection parameters: Position = (248.0, 297.3) = 6 54 27.76 -23 54 6.7 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 206.2 +/- 20.9 Background counts = 143.1 Rate = 0.003 +/- 0.0003 [Thu May 2 11:36:35 2013] Off-axis axis estimate = 3.66' [Thu May 2 11:37:17 2013] Using EEF radius (= 8.26 ")to estimate initial spatial extent for simple fitting [Thu May 2 11:37:17 2013] Initial guess for spatial extent in simple fitting = 8.26" [Thu May 2 11:37:17 2013] source mask rpix=1.9, npix_max = 23, mask sum = 14, frac = 0.609 [Thu May 2 11:37:17 2013] Giving source the simple spatial ID 97 for pass 0, mean size = 8.26" [Thu May 2 11:37:19 2013] fullrun_pn_xmm0652250101_pi300-10000_cl_pass0_src97.ximg exists [Thu May 2 11:37:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0652250101_pi300-10000_cl_pass0_src97.csv [Thu May 2 11:37:19 2013] fullrun_pn_xmm0652250101_pi300-10000_cl_pass0_src97_1.ximg exists [Thu May 2 11:37:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0652250101_pi300-10000_cl_pass0_src97.csv [Thu May 2 11:37:19 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0652250101_pi300-10000_cl_pass0_src97_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0652250101_pi300-10000_cl_pass0_src97.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Thu May 2 11:37:22 2013] fullrun_pn_xmm0652250101_pi300-10000_cl_pass0_tfrozen_src97.ximg exists [Thu May 2 11:37:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0652250101_pi300-10000_cl_pass0_tfrozen_src97.csv [Thu May 2 11:37:22 2013] fullrun_pn_xmm0652250101_pi300-10000_cl_pass0_tfrozen_src97_1.ximg exists [Thu May 2 11:37:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0652250101_pi300-10000_cl_pass0_tfrozen_src97.csv [Thu May 2 11:37:22 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0652250101_pi300-10000_cl_pass0_tfrozen_src97_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0652250101_pi300-10000_cl_pass0_tfrozen_src97.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Thu May 2 11:37:44 2013] Source 107 is offset by -7.039955 and 6.147154 pixels which is larger than 2 X fitted extent = 0.880883 x 0.880883, not incorporating fit results [Thu May 2 11:37:44 2013] Vigneting correction estimate = 1.000000 [Thu May 2 11:37:44 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Thu May 2 11:37:44 2013] Assessing source extent using major [Thu May 2 11:37:44 2013] Source does appear to be extended [Thu May 2 11:37:44 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Thu May 2 11:38:23 2013] Using EEF radius (= 8.26 ")to estimate initial spatial extent for simple fitting [Thu May 2 11:38:23 2013] Initial guess for spatial extent in simple fitting = 8.26" [Thu May 2 11:38:23 2013] source mask rpix=1.9, npix_max = 23, mask sum = 14, frac = 0.609 [Thu May 2 11:38:23 2013] Giving source the simple spatial ID 93 for pass 1, mean size = 8.26" [Thu May 2 11:38:26 2013] fullrun_pn_xmm0652250101_pi300-10000_cl_pass1_src93.ximg exists [Thu May 2 11:38:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0652250101_pi300-10000_cl_pass1_src93.csv [Thu May 2 11:38:26 2013] fullrun_pn_xmm0652250101_pi300-10000_cl_pass1_src93_1.ximg exists [Thu May 2 11:38:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0652250101_pi300-10000_cl_pass1_src93.csv [Thu May 2 11:38:26 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0652250101_pi300-10000_cl_pass1_src93_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0652250101_pi300-10000_cl_pass1_src93.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Thu May 2 11:38:28 2013] fullrun_pn_xmm0652250101_pi300-10000_cl_pass1_tfrozen_src93.ximg exists [Thu May 2 11:38:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0652250101_pi300-10000_cl_pass1_tfrozen_src93.csv [Thu May 2 11:38:28 2013] fullrun_pn_xmm0652250101_pi300-10000_cl_pass1_tfrozen_src93_1.ximg exists [Thu May 2 11:38:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0652250101_pi300-10000_cl_pass1_tfrozen_src93.csv [Thu May 2 11:38:28 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0652250101_pi300-10000_cl_pass1_tfrozen_src93_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0652250101_pi300-10000_cl_pass1_tfrozen_src93.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Thu May 2 11:38:54 2013] Spatial fit model total counts = 1457.720000, observed total counts = 1044.000000 [Thu May 2 11:38:54 2013] Poor agreement between spatial fit and data for source 107 It may help to tweak spatial fit manually Not incorporating fit results [Thu May 2 11:38:54 2013] Vigneting correction estimate = 1.000000 [Thu May 2 11:38:54 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Thu May 2 11:38:54 2013] Assessing source extent using major [Thu May 2 11:38:54 2013] Source does appear to be extended [Thu May 2 11:38:54 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Thu May 2 11:39:34 2013] XMMSAS src. selection expression = ellipse(21528.119949, 25820.185883, 652.500000, 652.500000, 0.000000, X, Y) [Thu May 2 11:39:34 2013] Not overwriting source region fullrun_pn_xmm0652250101_pi300-10000_pass1_cl_src107_src.reg [Thu May 2 11:39:34 2013] Extracting stamp from image fullrun_pn_xmm0652250101_pi300-10000_cl_sm2.00.img.gz, (211, 260) - (286, 335) [Thu May 2 11:39:34 2013] XMMSAS bgd. selection expression = annulus(21528.119949, 25820.185883, 1087.500000, 2175.000000, X, Y) && !ellipse(18508.044037, 27548.694916, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19968.233154, 23989.336090, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22156.792389, 22853.774750, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23481.696000, 27816.044000, 903.296026, 587.960817, 90.000000, X, Y) && !ellipse(23145.235800, 28575.327400, 1469.272042, 458.025613, 244.299000, X, Y) && !ellipse(23925.426880, 27176.966919, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24180.050000, 26696.262000, 1185.648034, 1185.648034, 0.000000, X, Y) && !ellipse(22932.055900, 25925.215600, 376.028011, 376.028011, 0.000000, X, Y) && !ellipse(20388.796432, 25046.098816, 870.000000, 870.000000, 0.000000, X, Y) [Thu May 2 11:39:34 2013] Writing fullrun_pn_xmm0652250101_pi300-10000_pass1_cl_src107.gif [Thu May 2 12:32:23 2013] Mean detx,y = (2784.32, 3387.33) [Thu May 2 12:32:27 2013] Setting backscal keywords in source and bgd. spectrum [Thu May 2 12:32:44 2013] Binned source spectrum to 10 counts/bin [Thu May 2 12:32:44 2013] Setting source spectrum file to fullrun_pn_xmm0652250101_pi300-10000_pass1_cl_src107_src_b10.pi.gz [Thu May 2 12:32:44 2013] Setting bgd. spectrum file to fullrun_pn_xmm0652250101_pi300-10000_pass1_cl_src107_bgd.pi.gz [Thu May 2 14:43:26 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done [Thu May 2 14:43:26 2013] rmf not generated due to insufficient counts [Thu May 2 14:59:38 2013] Updating aperture counts using extracted products [Thu May 2 14:59:38 2013] Total counts from fullrun_pn_xmm0652250101_pi300-10000_pass1_cl_src107_src_b10.pi.gz = 816.00 [Thu May 2 14:59:38 2013] Total counts from fullrun_pn_xmm0652250101_pi300-10000_pass1_cl_src107_bgd.pi.gz = 4361.00 [Thu May 2 14:59:38 2013] Got source and background scale factors 1049934.000000, 6782971.000000 [Thu May 2 14:59:38 2013] User source parameters: Position = (248.0, 297.3) = 6 54 27.76 -23 54 6.7 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 141.0 +/- 29.6 Background aperture counts = 675.0 Rate = 0.001 +/- 0.0003 [Thu May 2 14:59:38 2013] Updating counts from extracted products [Thu May 2 14:59:38 2013] Set source signif. to 140.96/25.98 = 5.43 [Thu May 2 14:59:42 2013] Calculating source flux in energy range 0.30-8.00 [Thu May 2 14:59:42 2013] Using photon index=1.80, rate=0.00135, arf fullrun_pn_xmm0652250101_pi300-10000_pass1_cl_src107.arf [Thu May 2 14:59:42 2013] Assuming count rate is from the 0.30-10.00 bandpass [Thu May 2 14:59:42 2013] Updating source flux to 7.3e-15 [Thu May 2 15:00:21 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Thu May 2 15:00:38 2013] xmm0652250101/analysis//spectral/fullrun_pn_xmm0652250101_pi300-10000_pass1_cl_src107_pl.csv not found, spectral fit skipped or did not complete