[Thu May  2 11:36:38 2013] Detection parameters:
  Position = (393.5, 115.9) = 6 53 41.55 -24 7 18.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 113.3 +/- 17.7
  Background counts = 63.8
  Rate = 0.001 +/- 0.0002

[Thu May  2 11:36:40 2013] Off-axis axis estimate = 14.92'
[Thu May  2 11:37:24 2013] Using EEF radius (= 13.89 ")to estimate initial spatial extent for simple fitting
[Thu May  2 11:37:24 2013] Initial guess for spatial extent in simple fitting = 13.89"
[Thu May  2 11:37:24 2013] source mask rpix=3.2, npix_max = 54, mask sum = 55, frac = 1.008
[Thu May  2 11:37:24 2013] Giving source the simple spatial ID 42 for pass 0, mean size = 13.89"
[Thu May  2 11:37:25 2013] fullrun_mos2_xmm0652250101_pi300-10000_cl_pass0_src42.ximg exists
[Thu May  2 11:37:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0652250101_pi300-10000_cl_pass0_src42.csv
[Thu May  2 11:37:25 2013] fullrun_mos2_xmm0652250101_pi300-10000_cl_pass0_src42_1.ximg exists
[Thu May  2 11:37:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0652250101_pi300-10000_cl_pass0_src42.csv
[Thu May  2 11:37:25 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0652250101_pi300-10000_cl_pass0_src42_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0652250101_pi300-10000_cl_pass0_src42.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  2 11:37:25 2013] fullrun_mos2_xmm0652250101_pi300-10000_cl_pass0_tfrozen_src42.ximg exists
[Thu May  2 11:37:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0652250101_pi300-10000_cl_pass0_tfrozen_src42.csv
[Thu May  2 11:37:25 2013] fullrun_mos2_xmm0652250101_pi300-10000_cl_pass0_tfrozen_src42_1.ximg exists
[Thu May  2 11:37:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0652250101_pi300-10000_cl_pass0_tfrozen_src42.csv
[Thu May  2 11:37:25 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0652250101_pi300-10000_cl_pass0_tfrozen_src42_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0652250101_pi300-10000_cl_pass0_tfrozen_src42.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  2 11:38:00 2013] Warning: source 42 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 23 at 18.491837 pixels away
[Thu May  2 11:38:00 2013] Vigneting correction estimate = 1.000000
[Thu May  2 11:38:00 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  2 11:38:00 2013] Assessing source extent using major
[Thu May  2 11:38:00 2013] Source does appear to be extended
[Thu May  2 11:38:00 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  2 11:38:32 2013] Using EEF radius (= 13.89 ")to estimate initial spatial extent for simple fitting
[Thu May  2 11:38:32 2013] Initial guess for spatial extent in simple fitting = 13.89"
[Thu May  2 11:38:32 2013] source mask rpix=3.2, npix_max = 54, mask sum = 55, frac = 1.008
[Thu May  2 11:38:32 2013] Giving source the simple spatial ID 42 for pass 1, mean size = 13.89"
[Thu May  2 11:38:33 2013] fullrun_mos2_xmm0652250101_pi300-10000_cl_pass1_src42.ximg exists
[Thu May  2 11:38:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0652250101_pi300-10000_cl_pass1_src42.csv
[Thu May  2 11:38:33 2013] fullrun_mos2_xmm0652250101_pi300-10000_cl_pass1_src42_1.ximg exists
[Thu May  2 11:38:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0652250101_pi300-10000_cl_pass1_src42.csv
[Thu May  2 11:38:33 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0652250101_pi300-10000_cl_pass1_src42_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0652250101_pi300-10000_cl_pass1_src42.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  2 11:38:33 2013] fullrun_mos2_xmm0652250101_pi300-10000_cl_pass1_tfrozen_src42.ximg exists
[Thu May  2 11:38:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0652250101_pi300-10000_cl_pass1_tfrozen_src42.csv
[Thu May  2 11:38:33 2013] fullrun_mos2_xmm0652250101_pi300-10000_cl_pass1_tfrozen_src42_1.ximg exists
[Thu May  2 11:38:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0652250101_pi300-10000_cl_pass1_tfrozen_src42.csv
[Thu May  2 11:38:33 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0652250101_pi300-10000_cl_pass1_tfrozen_src42_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0652250101_pi300-10000_cl_pass1_tfrozen_src42.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  2 11:39:10 2013] Warning: source 42 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 23 at 16.966223 pixels away
[Thu May  2 11:39:10 2013] Vigneting correction estimate = 1.000000
[Thu May  2 11:39:10 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  2 11:39:10 2013] Assessing source extent using major
[Thu May  2 11:39:10 2013] Source does appear to be extended
[Thu May  2 11:39:10 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  2 14:57:13 2013] XMMSAS src. selection expression = ellipse(34185.506165, 10038.366501, 652.500000, 652.500000, 0.000000, X, Y)
[Thu May  2 14:57:13 2013] Not overwriting source region fullrun_mos2_xmm0652250101_pi300-10000_pass1_cl_src23_src.reg
[Thu May  2 14:57:13 2013] Extracting stamp from image fullrun_mos2_xmm0652250101_pi300-10000_cl_sm2.00.img.gz, (356, 78) - (431, 153)
[Thu May  2 14:57:13 2013] XMMSAS bgd. selection expression = annulus(34185.506165, 10038.366501, 1087.500000, 2175.000000, X, Y) && !ellipse(31298.140564, 10810.030853, 870.000000, 870.000000, 0.000000, X, Y)
[Thu May  2 14:57:13 2013] Writing fullrun_mos2_xmm0652250101_pi300-10000_pass1_cl_src23.gif
[Thu May  2 14:57:15 2013] ../../xmm0652250101/products/events/fullrun_mos2_xmm0652250101_pi300-10000_pass1_cl_src23_src.evt and ../../xmm0652250101/products/events/fullrun_mos2_xmm0652250101_pi300-10000_pass1_cl_src23_bgd.evt exist, delete to re-create
[Thu May  2 14:57:15 2013] Mean detx,y = (1372.63, 16200.53) 
[Thu May  2 14:57:15 2013] ../../xmm0652250101/products/images/fullrun_mos2_xmm0652250101_pi300-10000_pass1_cl_src23_src.img and ../../xmm0652250101/products/images/fullrun_mos2_xmm0652250101_pi300-10000_pass1_cl_src23_bgd.img exist, delete to re-create
[Thu May  2 14:57:15 2013] ../../xmm0652250101/products/spectra/fullrun_mos2_xmm0652250101_pi300-10000_pass1_cl_src23_src_b10.pi.gz and ../../xmm0652250101/products/spectra/fullrun_mos2_xmm0652250101_pi300-10000_pass1_cl_src23_bgd.pi exist, delete to re-create
[Thu May  2 14:57:15 2013] Setting source spectrum file to fullrun_mos2_xmm0652250101_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Thu May  2 14:57:15 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0652250101_pi300-10000_pass1_cl_src23_bgd.pi.gz
[Thu May  2 14:57:15 2013] ../../xmm0652250101/products/lightcurves/fullrun_mos2_xmm0652250101_pi300-10000_pass1_cl_src23_src.lc and ../../xmm0652250101/products/lightcurves/fullrun_mos2_xmm0652250101_pi300-10000_pass1_cl_src23_bgd.lc exist, delete to re-create
[Thu May  2 14:57:21 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu May  2 14:57:21 2013] rmf not generated due to insufficient counts
[Thu May  2 14:57:21 2013] fullrun_mos2_xmm0652250101_pi300-10000_pass1_cl_src23.arf exists, delete to re-create
[Thu May  2 14:59:58 2013] Updating aperture counts using extracted products
[Thu May  2 14:59:58 2013] Total counts from fullrun_mos2_xmm0652250101_pi300-10000_pass1_cl_src23_src_b10.pi.gz = 322.00
[Thu May  2 14:59:58 2013] Total counts from fullrun_mos2_xmm0652250101_pi300-10000_pass1_cl_src23_bgd.pi.gz = 1371.00
[Thu May  2 14:59:58 2013] Got source and background scale factors 1124278.000000, 5920788.000000
[Thu May  2 14:59:58 2013] User source parameters:
  Position = (393.5, 115.9) = 6 53 41.55 -24 7 18.3
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 61.7 +/- 19.0
  Background aperture counts = 260.3
  Rate = 0.0006 +/- 0.0002

[Thu May  2 14:59:58 2013] Updating counts from extracted products
[Thu May  2 14:59:58 2013] Set source signif. to 61.67/16.13 = 3.82
[Thu May  2 15:00:02 2013] Calculating source flux in energy range 0.30-8.00
[Thu May  2 15:00:02 2013] Using photon index=1.80, rate=0.000577, arf fullrun_mos2_xmm0652250101_pi300-10000_pass1_cl_src23.arf
[Thu May  2 15:00:02 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May  2 15:00:02 2013] Updating source flux to 2.4e-14
[Thu May  2 15:00:16 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu May  2 15:00:20 2013] xmm0652250101/analysis//spectral/fullrun_mos2_xmm0652250101_pi300-10000_pass1_cl_src23_pl.csv not found, spectral fit skipped or did not complete