[Thu May  2 11:36:35 2013] Detection parameters:
  Position = (213.3, 316.2) = 6 54 38.75 -23 52 44.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 272.2 +/- 21.9
  Background counts = 54.9
  Rate = 0.004 +/- 0.0003

[Thu May  2 11:36:37 2013] Off-axis axis estimate = 6.30'
[Thu May  2 11:37:22 2013] Using EEF radius (= 9.58 ")to estimate initial spatial extent for simple fitting
[Thu May  2 11:37:22 2013] Initial guess for spatial extent in simple fitting = 9.58"
[Thu May  2 11:37:22 2013] source mask rpix=2.2, npix_max = 29, mask sum = 25, frac = 0.856
[Thu May  2 11:37:22 2013] Giving source the simple spatial ID 8 for pass 0, mean size = 9.58"
[Thu May  2 11:37:22 2013] fullrun_mos1_xmm0652250101_pi300-10000_cl_pass0_src8.ximg exists
[Thu May  2 11:37:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0652250101_pi300-10000_cl_pass0_src8.csv
[Thu May  2 11:37:22 2013] fullrun_mos1_xmm0652250101_pi300-10000_cl_pass0_src8_1.ximg exists
[Thu May  2 11:37:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0652250101_pi300-10000_cl_pass0_src8.csv
[Thu May  2 11:37:22 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0652250101_pi300-10000_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0652250101_pi300-10000_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  2 11:37:23 2013] fullrun_mos1_xmm0652250101_pi300-10000_cl_pass0_tfrozen_src8.ximg exists
[Thu May  2 11:37:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0652250101_pi300-10000_cl_pass0_tfrozen_src8.csv
[Thu May  2 11:37:23 2013] fullrun_mos1_xmm0652250101_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists
[Thu May  2 11:37:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0652250101_pi300-10000_cl_pass0_tfrozen_src8.csv
[Thu May  2 11:37:23 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0652250101_pi300-10000_cl_pass0_tfrozen_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0652250101_pi300-10000_cl_pass0_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  2 11:37:51 2013] Warning: source 8 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 12.791789 pixels away
[Thu May  2 11:37:51 2013] Vigneting correction estimate = 1.000000
[Thu May  2 11:37:51 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  2 11:37:51 2013] Assessing source extent using major
[Thu May  2 11:37:51 2013] Source does appear to be extended
[Thu May  2 11:37:51 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  2 11:38:28 2013] Using EEF radius (= 9.58 ")to estimate initial spatial extent for simple fitting
[Thu May  2 11:38:28 2013] Initial guess for spatial extent in simple fitting = 9.58"
[Thu May  2 11:38:28 2013] source mask rpix=2.2, npix_max = 29, mask sum = 25, frac = 0.856
[Thu May  2 11:38:28 2013] Giving source the simple spatial ID 8 for pass 1, mean size = 9.58"
[Thu May  2 11:38:29 2013] fullrun_mos1_xmm0652250101_pi300-10000_cl_pass1_src8.ximg exists
[Thu May  2 11:38:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0652250101_pi300-10000_cl_pass1_src8.csv
[Thu May  2 11:38:29 2013] fullrun_mos1_xmm0652250101_pi300-10000_cl_pass1_src8_1.ximg exists
[Thu May  2 11:38:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0652250101_pi300-10000_cl_pass1_src8.csv
[Thu May  2 11:38:29 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0652250101_pi300-10000_cl_pass1_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0652250101_pi300-10000_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  2 11:38:31 2013] fullrun_mos1_xmm0652250101_pi300-10000_cl_pass1_tfrozen_src8.ximg exists
[Thu May  2 11:38:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0652250101_pi300-10000_cl_pass1_tfrozen_src8.csv
[Thu May  2 11:38:31 2013] fullrun_mos1_xmm0652250101_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists
[Thu May  2 11:38:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0652250101_pi300-10000_cl_pass1_tfrozen_src8.csv
[Thu May  2 11:38:31 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0652250101_pi300-10000_cl_pass1_tfrozen_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0652250101_pi300-10000_cl_pass1_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  2 11:39:02 2013] Spatial fit model total counts = 624.564000, observed total counts = 495.000000
[Thu May  2 11:39:02 2013] Poor agreement between spatial fit and data for source 6
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu May  2 11:39:02 2013] Vigneting correction estimate = 1.000000
[Thu May  2 11:39:02 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  2 11:39:02 2013] Assessing source extent using major
[Thu May  2 11:39:02 2013] Source does appear to be extended
[Thu May  2 11:39:02 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  2 14:57:06 2013] XMMSAS src. selection expression = ellipse(18510.570297, 27464.312775, 652.500000, 652.500000, 0.000000, X, Y)
[Thu May  2 14:57:06 2013] Not overwriting source region fullrun_mos1_xmm0652250101_pi300-10000_pass1_cl_src6_src.reg
[Thu May  2 14:57:06 2013] Extracting stamp from image fullrun_mos1_xmm0652250101_pi300-10000_cl_sm2.00.img.gz, (176, 279) - (251, 354)
[Thu May  2 14:57:06 2013] XMMSAS bgd. selection expression = annulus(18510.570297, 27464.312775, 1087.500000, 2175.000000, X, Y) && !ellipse(21496.801224, 25886.314697, 870.000000, 870.000000, 0.000000, X, Y)
[Thu May  2 14:57:06 2013] Writing fullrun_mos1_xmm0652250101_pi300-10000_pass1_cl_src6.gif
[Thu May  2 14:57:07 2013] ../../xmm0652250101/products/events/fullrun_mos1_xmm0652250101_pi300-10000_pass1_cl_src6_src.evt and ../../xmm0652250101/products/events/fullrun_mos1_xmm0652250101_pi300-10000_pass1_cl_src6_bgd.evt exist, delete to re-create
[Thu May  2 14:57:07 2013] Mean detx,y = (-6121.87, 4525.88) 
[Thu May  2 14:57:07 2013] ../../xmm0652250101/products/images/fullrun_mos1_xmm0652250101_pi300-10000_pass1_cl_src6_src.img and ../../xmm0652250101/products/images/fullrun_mos1_xmm0652250101_pi300-10000_pass1_cl_src6_bgd.img exist, delete to re-create
[Thu May  2 14:57:07 2013] ../../xmm0652250101/products/spectra/fullrun_mos1_xmm0652250101_pi300-10000_pass1_cl_src6_src_b10.pi.gz and ../../xmm0652250101/products/spectra/fullrun_mos1_xmm0652250101_pi300-10000_pass1_cl_src6_bgd.pi exist, delete to re-create
[Thu May  2 14:57:07 2013] Setting source spectrum file to fullrun_mos1_xmm0652250101_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Thu May  2 14:57:07 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0652250101_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Thu May  2 14:57:07 2013] ../../xmm0652250101/products/lightcurves/fullrun_mos1_xmm0652250101_pi300-10000_pass1_cl_src6_src.lc and ../../xmm0652250101/products/lightcurves/fullrun_mos1_xmm0652250101_pi300-10000_pass1_cl_src6_bgd.lc exist, delete to re-create
[Thu May  2 14:57:12 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu May  2 14:57:12 2013] rmf not generated due to insufficient counts
[Thu May  2 14:57:12 2013] fullrun_mos1_xmm0652250101_pi300-10000_pass1_cl_src6.arf exists, delete to re-create
[Thu May  2 14:59:43 2013] Updating aperture counts using extracted products
[Thu May  2 14:59:43 2013] Total counts from fullrun_mos1_xmm0652250101_pi300-10000_pass1_cl_src6_src_b10.pi.gz = 435.00
[Thu May  2 14:59:43 2013] Total counts from fullrun_mos1_xmm0652250101_pi300-10000_pass1_cl_src6_bgd.pi.gz = 1182.00
[Thu May  2 14:59:43 2013] Got source and background scale factors 1071928.000000, 5735802.000000
[Thu May  2 14:59:43 2013] User source parameters:
  Position = (213.3, 316.2) = 6 54 38.75 -23 52 44.2
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 214.1 +/- 21.9
  Background aperture counts = 220.9
  Rate = 0.002 +/- 0.0002

[Thu May  2 14:59:43 2013] Updating counts from extracted products
[Thu May  2 14:59:43 2013] Set source signif. to 214.10/14.86 = 14.41
[Thu May  2 14:59:51 2013] Calculating source flux in energy range 0.30-8.00
[Thu May  2 14:59:51 2013] Using photon index=1.80, rate=0.00201, arf fullrun_mos1_xmm0652250101_pi300-10000_pass1_cl_src6.arf
[Thu May  2 14:59:51 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May  2 14:59:51 2013] Updating source flux to 3.3e-14
[Thu May  2 15:00:06 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu May  2 15:00:16 2013] xmm0652250101/analysis//spectral/fullrun_mos1_xmm0652250101_pi300-10000_pass1_cl_src6_pl.csv not found, spectral fit skipped or did not complete