[Tue Nov 29 22:13:06 2011] Detection parameters:
  Position = (277.9, 284.0) = 0 3 11.79 -6 5 39.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 5217.4 +/- 91.7
  Background counts = 209.5
  Rate = 0.2 +/- 0.003

[Tue Nov 29 22:13:08 2011] Off-axis axis estimate = 1.82'
[Tue Nov 29 22:17:52 2011] Using EEF radius (= 7.34 ")to estimate initial spatial extent for simple fitting
[Tue Nov 29 22:17:52 2011] Initial guess for spatial extent in simple fitting = 7.34"
[Tue Nov 29 22:17:52 2011] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.836
[Tue Nov 29 22:17:52 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 7.34"
[Tue Nov 29 23:51:16 2011] fullrun_pn_xmm0652010401_pi300-10000_cl_pass0_src3.ximg exists
[Tue Nov 29 23:51:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0652010401_pi300-10000_cl_pass0_src3.csv
[Tue Nov 29 23:51:16 2011] fullrun_pn_xmm0652010401_pi300-10000_cl_pass0_src3_1.ximg exists
[Tue Nov 29 23:51:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0652010401_pi300-10000_cl_pass0_src3.csv
[Tue Nov 29 23:51:16 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0652010401_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0652010401_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Nov 29 23:51:16 2011] fullrun_pn_xmm0652010401_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Tue Nov 29 23:51:16 2011] fullrun_pn_xmm0652010401_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Tue Nov 29 23:51:16 2011] Fit fullrun_pn_xmm0652010401_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Wed Nov 30 02:43:34 2011] Spatial fit model total counts = 17505.600000, observed total counts = 17481.000000
[Wed Nov 30 02:43:34 2011] Offset between fit and detection position for source 4 = 2.269617 pixels
[Wed Nov 30 02:43:34 2011] 18222.430000 total counts/ 11822.800000 bgd. counts: snr = 58.856535
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 2.269617 pixels
  Position = (275.9, 283.1) = 0 3 12.39 -6 5 43.2
  Extent = 14.7 (14.6-29.4)", rotation angle = 0
  Source counts = 6399.6 +/- 135.0
  Background counts = 11822.8
  Rate = 0.2 +/- 0.004
[Wed Nov 30 02:43:34 2011] Vigneting correction estimate = 1.000000
[Wed Nov 30 02:43:34 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Nov 30 02:43:34 2011] Assessing source extent using major axis lower bound
[Wed Nov 30 02:43:34 2011] Source does appear to be extended
[Wed Nov 30 02:43:34 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Nov 30 02:44:08 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Nov 30 02:44:08 2011] Initial guess for spatial extent in simple fitting = 14.68"
[Wed Nov 30 02:44:08 2011] source mask rpix=3.4, npix_max = 60, mask sum = 60, frac = 1.000
[Wed Nov 30 02:44:08 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 14.68"
[Wed Nov 30 04:19:06 2011] fullrun_pn_xmm0652010401_pi300-10000_cl_pass1_src3.ximg exists
[Wed Nov 30 04:19:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0652010401_pi300-10000_cl_pass1_src3.csv
[Wed Nov 30 04:19:06 2011] fullrun_pn_xmm0652010401_pi300-10000_cl_pass1_src3_1.ximg exists
[Wed Nov 30 04:19:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0652010401_pi300-10000_cl_pass1_src3.csv
[Wed Nov 30 04:19:06 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0652010401_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0652010401_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Nov 30 04:19:07 2011] fullrun_pn_xmm0652010401_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Wed Nov 30 04:19:07 2011] fullrun_pn_xmm0652010401_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Wed Nov 30 04:19:07 2011] Fit fullrun_pn_xmm0652010401_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Wed Nov 30 06:31:02 2011] Warning, spatial fit 3 centroid is now closest to src. 35
[Wed Nov 30 06:31:02 2011] Vigneting correction estimate = 1.000000
[Wed Nov 30 06:31:02 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Nov 30 06:31:02 2011] Assessing source extent using major axis lower bound
[Wed Nov 30 06:31:02 2011] Source does appear to be extended
[Wed Nov 30 06:31:02 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Nov 30 06:31:20 2011] Counts = 6399.630000, rescaling region sizes by 2.000000
[Wed Nov 30 06:31:20 2011] XMMSAS src. selection expression = ellipse(23951.325200, 24577.104200, 1761.096051, 1761.096051, 0.000000, X, Y)
[Wed Nov 30 06:31:20 2011] Writing source region out to fullrun_pn_xmm0652010401_pi300-10000_pass1_cl_src4_src.reg
[Wed Nov 30 06:31:20 2011] Extracting stamp from image fullrun_pn_xmm0652010401_pi300-10000_cl_sm2.00.img.gz, (175, 182) - (377, 384)
[Wed Nov 30 06:31:20 2011] XMMSAS bgd. selection expression = annulus(23951.325200, 24577.104200, 5870.320169, 11740.640338, X, Y) && !ellipse(23294.192000, 23143.102000, 1242.456036, 1242.456036, 0.000000, X, Y) && !ellipse(18631.100662, 18962.084579, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33609.348877, 35400.705109, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31307.491577, 12845.939178, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25889.376440, 31020.280800, 422.522412, 422.522412, 0.000000, X, Y) && !ellipse(23173.527893, 29854.080750, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18917.786743, 29072.931305, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22742.672800, 23928.556000, 950.912027, 950.912027, 0.000000, X, Y) && !ellipse(22680.772000, 24065.512000, 626.923218, 626.923218, 0.000000, X, Y) && !ellipse(22624.223200, 23366.316800, 487.055214, 487.055214, 0.000000, X, Y) && !ellipse(31728.314000, 16437.105600, 458.984013, 458.984013, 0.000000, X, Y) && !ellipse(19315.844000, 19845.612400, 426.572812, 426.572812, 0.000000, X, Y) && !ellipse(35224.727112, 19426.958969, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22339.974600, 19027.515400, 350.107210, 350.107210, 0.000000, X, Y) && !ellipse(17061.981003, 17977.521393, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15645.243505, 36867.966936, 905.382367, 228.665079, 129.399316, X, Y) && !ellipse(20103.311940, 35626.440800, 860.200025, 547.770416, 129.030581, X, Y) && !ellipse(30843.921880, 32924.376600, 699.349620, 699.349620, 0.000000, X, Y) && !ellipse(24575.917023, 32781.261169, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22732.615143, 26822.151459, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26572.700000, 26521.990000, 1042.400030, 1042.400030, 0.000000, X, Y) && !ellipse(18428.851400, 25264.401600, 498.318414, 498.318414, 0.000000, X, Y) && !ellipse(14702.472397, 25204.192535, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26206.561676, 24662.009003, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24116.225250, 22313.401947, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20412.262909, 21040.895523, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19617.431140, 20912.894800, 432.139212, 432.139212, 0.000000, X, Y) && !ellipse(20183.185654, 18258.653152, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Nov 30 06:31:20 2011] Writing fullrun_pn_xmm0652010401_pi300-10000_pass1_cl_src4.gif
[Wed Nov 30 06:47:15 2011] Mean detx,y = (203.15, -334.37) 
[Wed Nov 30 06:47:24 2011] Setting backscal keywords in source and bgd. spectrum
[Wed Nov 30 06:52:49 2011] Binned source spectrum to 10 counts/bin
[Wed Nov 30 06:52:49 2011] Setting source spectrum file to fullrun_pn_xmm0652010401_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Wed Nov 30 06:52:49 2011] Setting bgd. spectrum file to fullrun_pn_xmm0652010401_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Wed Nov 30 14:29:35 2011] Updating aperture counts using extracted products
[Wed Nov 30 14:29:35 2011] Error reading totcts from fullrun_pn_xmm0652010401_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Wed Nov 30 14:29:37 2011] Calculating source flux in energy range 0.30-8.00
[Wed Nov 30 14:29:37 2011] Using photon index=1.80, rate=0.21, arf fullrun_pn_xmm0652010401_pi300-10000_pass1_cl_src4.arf
[Wed Nov 30 14:29:37 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Nov 30 14:29:37 2011] Updating source flux to 4.6e-13