[Tue Nov 29 22:13:07 2011] Detection parameters:
  Position = (261.5, 270.4) = 0 3 16.59 -6 6 41.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 340.5 +/- 27.2
  Background counts = 182.8
  Rate = 0.02 +/- 0.001

[Tue Nov 29 22:13:08 2011] Off-axis axis estimate = 3.36'
[Tue Nov 29 22:17:52 2011] Using EEF radius (= 8.11 ")to estimate initial spatial extent for simple fitting
[Tue Nov 29 22:17:52 2011] Initial guess for spatial extent in simple fitting = 8.11"
[Tue Nov 29 22:17:52 2011] source mask rpix=1.9, npix_max = 22, mask sum = 21, frac = 0.939
[Tue Nov 29 22:17:52 2011] Giving source the simple spatial ID 13 for pass 0, mean size = 8.11"
[Tue Nov 29 23:51:16 2011] fullrun_pn_xmm0652010401_pi300-10000_cl_pass0_src13.ximg exists
[Tue Nov 29 23:51:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0652010401_pi300-10000_cl_pass0_src13.csv
[Tue Nov 29 23:51:16 2011] fullrun_pn_xmm0652010401_pi300-10000_cl_pass0_src13_1.ximg exists
[Tue Nov 29 23:51:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0652010401_pi300-10000_cl_pass0_src13.csv
[Tue Nov 29 23:51:16 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0652010401_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0652010401_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Nov 29 23:51:16 2011] fullrun_pn_xmm0652010401_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Tue Nov 29 23:51:16 2011] fullrun_pn_xmm0652010401_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Tue Nov 29 23:51:16 2011] Fit fullrun_pn_xmm0652010401_pi300-10000_cl_pass0_tfrozen_src13 appears to have run properly
[Wed Nov 30 02:43:34 2011] Spatial fit model total counts = 2796.770000, observed total counts = 2800.000000
[Wed Nov 30 02:43:34 2011] Offset between fit and detection position for source 16 = 1.533375 pixels
[Wed Nov 30 02:43:34 2011] 2783.645000 total counts/ 2637.880000 bgd. counts: snr = 2.838087
Spatial fit parameters:
  Offset between fit and detection position for source 16 = 1.533375 pixels
  Position = (260.6, 269.1) = 0 3 16.84 -6 6 43.8
  Extent = 6.1 (4.4-9.1)", rotation angle = 0
  Source counts = 145.8 +/- 52.8
  Background counts = 2637.9
  Rate = 0.005 +/- 0.002
[Wed Nov 30 02:43:34 2011] Vigneting correction estimate = 1.000000
[Wed Nov 30 02:43:34 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Nov 30 02:43:34 2011] Assessing source extent using major axis lower bound
[Wed Nov 30 02:43:34 2011] Source does appear to be extended
[Wed Nov 30 02:43:34 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Nov 30 02:43:34 2011] Source is confused with source 2
[Wed Nov 30 02:44:08 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Nov 30 02:44:08 2011] Initial guess for spatial extent in simple fitting = 6.09"
[Wed Nov 30 02:44:08 2011] source mask rpix=1.4, npix_max = 14, mask sum = 14, frac = 0.970
[Wed Nov 30 02:44:08 2011] Giving source the simple spatial ID 12 for pass 1, mean size = 6.09"
[Wed Nov 30 04:19:06 2011] fullrun_pn_xmm0652010401_pi300-10000_cl_pass1_src12.ximg exists
[Wed Nov 30 04:19:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0652010401_pi300-10000_cl_pass1_src12.csv
[Wed Nov 30 04:19:06 2011] fullrun_pn_xmm0652010401_pi300-10000_cl_pass1_src12_1.ximg exists
[Wed Nov 30 04:19:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0652010401_pi300-10000_cl_pass1_src12.csv
[Wed Nov 30 04:19:06 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0652010401_pi300-10000_cl_pass1_src12_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0652010401_pi300-10000_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Nov 30 04:19:07 2011] fullrun_pn_xmm0652010401_pi300-10000_cl_pass1_tfrozen_src12.ximg exists
[Wed Nov 30 04:19:07 2011] fullrun_pn_xmm0652010401_pi300-10000_cl_pass1_tfrozen_src12_1.ximg exists
[Wed Nov 30 04:19:07 2011] Fit fullrun_pn_xmm0652010401_pi300-10000_cl_pass1_tfrozen_src12 appears to have run properly
[Wed Nov 30 06:31:02 2011] Warning, spatial fit 12 centroid is now closest to src. 14
[Wed Nov 30 06:31:02 2011] Vigneting correction estimate = 1.000000
[Wed Nov 30 06:31:02 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Nov 30 06:31:02 2011] Assessing source extent using major axis lower bound
[Wed Nov 30 06:31:02 2011] Source does appear to be extended
[Wed Nov 30 06:31:02 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Nov 30 06:31:20 2011] XMMSAS src. selection expression = ellipse(22624.223200, 23366.316800, 365.291411, 365.291411, 0.000000, X, Y)
[Wed Nov 30 06:31:20 2011] Writing source region out to fullrun_pn_xmm0652010401_pi300-10000_pass1_cl_src16_src.reg
[Wed Nov 30 06:31:20 2011] Extracting stamp from image fullrun_pn_xmm0652010401_pi300-10000_cl_sm2.00.img.gz, (240, 248) - (282, 290)
[Wed Nov 30 06:31:20 2011] XMMSAS bgd. selection expression = annulus(22624.223200, 23366.316800, 608.819018, 1217.638035, X, Y) && !ellipse(23294.192000, 23143.102000, 1242.456036, 1242.456036, 0.000000, X, Y) && !ellipse(23951.325200, 24577.104200, 1174.064034, 1174.064034, 0.000000, X, Y) && !ellipse(22742.672800, 23928.556000, 950.912027, 950.912027, 0.000000, X, Y) && !ellipse(22680.772000, 24065.512000, 626.923218, 626.923218, 0.000000, X, Y) && !ellipse(24116.225250, 22313.401947, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Nov 30 06:31:20 2011] Writing fullrun_pn_xmm0652010401_pi300-10000_pass1_cl_src16.gif
[Wed Nov 30 06:58:21 2011] Mean detx,y = (1000.07, -2150.80) 
[Wed Nov 30 06:58:23 2011] Setting backscal keywords in source and bgd. spectrum
[Wed Nov 30 06:58:35 2011] Binned source spectrum to 10 counts/bin
[Wed Nov 30 06:58:35 2011] Setting source spectrum file to fullrun_pn_xmm0652010401_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Wed Nov 30 06:58:35 2011] Setting bgd. spectrum file to fullrun_pn_xmm0652010401_pi300-10000_pass1_cl_src16_bgd.pi.gz
[Wed Nov 30 14:29:35 2011] Updating aperture counts using extracted products
[Wed Nov 30 14:29:35 2011] Error reading totcts from fullrun_pn_xmm0652010401_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Wed Nov 30 14:29:37 2011] Calculating source flux in energy range 0.30-8.00
[Wed Nov 30 14:29:37 2011] Using photon index=1.80, rate=0.00479, arf fullrun_pn_xmm0652010401_pi300-10000_pass1_cl_src16.arf
[Wed Nov 30 14:29:37 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Nov 30 14:29:37 2011] Updating source flux to 1.4e-14
[Wed Nov 30 14:34:38 2011] Flag c found in src. 16 procflags, skipping spectral fitting