[Tue Nov 29 22:13:38 2011] Detection parameters:
  Position = (260.4, 300.9) = 0 3 16.90 -6 4 24.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 76.0 +/- 15.7
  Background counts = 57.6
  Rate = 0.002 +/- 0.0004

[Tue Nov 29 22:13:38 2011] Off-axis axis estimate = 2.76'
[Tue Nov 29 23:51:17 2011] Using EEF radius (= 7.81 ")to estimate initial spatial extent for simple fitting
[Tue Nov 29 23:51:17 2011] Initial guess for spatial extent in simple fitting = 7.81"
[Tue Nov 29 23:51:17 2011] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.949
[Tue Nov 29 23:51:17 2011] Giving source the simple spatial ID 19 for pass 0, mean size = 7.81"
[Wed Nov 30 00:53:23 2011] fullrun_mos1_xmm0652010401_pi300-10000_cl_pass0_src19.ximg exists
[Wed Nov 30 00:53:23 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0652010401_pi300-10000_cl_pass0_src19.csv
[Wed Nov 30 00:53:23 2011] fullrun_mos1_xmm0652010401_pi300-10000_cl_pass0_src19_1.ximg exists
[Wed Nov 30 00:53:23 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0652010401_pi300-10000_cl_pass0_src19.csv
[Wed Nov 30 00:53:23 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0652010401_pi300-10000_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0652010401_pi300-10000_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Nov 30 00:53:24 2011] fullrun_mos1_xmm0652010401_pi300-10000_cl_pass0_tfrozen_src19.ximg exists
[Wed Nov 30 00:53:24 2011] fullrun_mos1_xmm0652010401_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists
[Wed Nov 30 00:53:24 2011] Fit fullrun_mos1_xmm0652010401_pi300-10000_cl_pass0_tfrozen_src19 appears to have run properly
[Wed Nov 30 02:43:42 2011] Spatial fit model total counts = 1145.790000, observed total counts = 1143.000000
[Wed Nov 30 02:43:42 2011] Offset between fit and detection position for source 16 = 8.848284 pixels
[Wed Nov 30 02:43:42 2011] 1160.277000 total counts/ 1026.170000 bgd. counts: snr = 4.186410
Spatial fit parameters:
  Offset between fit and detection position for source 16 = 8.848284 pixels
  Position = (266.8, 294.8) = 0 3 15.03 -6 4 52.0
  Extent = 14.9 (13.5-15.6)", rotation angle = 0
  Source counts = 134.1 +/- 34.1
  Background counts = 1026.2
  Rate = 0.004 +/- 0.0009
[Wed Nov 30 02:43:42 2011] Vigneting correction estimate = 1.000000
[Wed Nov 30 02:43:42 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Nov 30 02:43:42 2011] Assessing source extent using major axis lower bound
[Wed Nov 30 02:43:42 2011] Source does appear to be extended
[Wed Nov 30 02:43:42 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Nov 30 04:19:08 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Nov 30 04:19:08 2011] Initial guess for spatial extent in simple fitting = 14.93"
[Wed Nov 30 04:19:08 2011] source mask rpix=3.4, npix_max = 61, mask sum = 64, frac = 1.035
[Wed Nov 30 04:19:08 2011] Giving source the simple spatial ID 17 for pass 1, mean size = 14.93"
[Wed Nov 30 05:01:39 2011] fullrun_mos1_xmm0652010401_pi300-10000_cl_pass1_src17.ximg exists
[Wed Nov 30 05:01:39 2011] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0652010401_pi300-10000_cl_pass1_src17.csv
[Wed Nov 30 05:01:39 2011] fullrun_mos1_xmm0652010401_pi300-10000_cl_pass1_src17_1.ximg exists
[Wed Nov 30 05:01:39 2011] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0652010401_pi300-10000_cl_pass1_src17.csv
[Wed Nov 30 05:01:39 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0652010401_pi300-10000_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0652010401_pi300-10000_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Nov 30 05:01:39 2011] fullrun_mos1_xmm0652010401_pi300-10000_cl_pass1_tfrozen_src17.ximg exists
[Wed Nov 30 05:01:39 2011] fullrun_mos1_xmm0652010401_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists
[Wed Nov 30 05:01:39 2011] Fit fullrun_mos1_xmm0652010401_pi300-10000_cl_pass1_tfrozen_src17 appears to have run properly
[Wed Nov 30 06:31:05 2011] Source 16 is offset by -5.082168 and -5.159118 pixels which is larger than
2 X fitted extent = 2.384766 x 4.783524, not incorporating fit results
[Wed Nov 30 06:31:05 2011] Warning, spatial fit 17 centroid is now closest to src. 1
[Wed Nov 30 06:31:05 2011] Vigneting correction estimate = 1.000000
[Wed Nov 30 06:31:05 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Nov 30 06:31:05 2011] Assessing source extent using major axis lower bound
[Wed Nov 30 06:31:05 2011] Source does appear to be extended
[Wed Nov 30 06:31:05 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Nov 30 06:31:05 2011] Source is confused with source 1
[Wed Nov 30 09:58:34 2011] XMMSAS src. selection expression = ellipse(23164.462000, 25600.700000, 895.716026, 895.716026, 0.000000, X, Y)
[Wed Nov 30 09:58:34 2011] Writing source region out to fullrun_mos1_xmm0652010401_pi300-10000_pass1_cl_src16_src.reg
[Wed Nov 30 09:58:34 2011] Extracting stamp from image fullrun_mos1_xmm0652010401_pi300-10000_cl_sm2.00.img.gz, (215, 243) - (318, 346)
[Wed Nov 30 09:58:34 2011] XMMSAS bgd. selection expression = annulus(23164.462000, 25600.700000, 1492.860043, 2985.720086, X, Y) && !ellipse(24134.648000, 24668.766000, 2388.576069, 2388.576069, 0.000000, X, Y) && !ellipse(23771.976807, 22982.856964, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22466.233398, 23454.573364, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22651.202000, 22542.660000, 1295.600037, 1295.600037, 0.000000, X, Y) && !ellipse(23133.200653, 26549.875549, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23698.089996, 27536.752594, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Nov 30 09:58:34 2011] Writing fullrun_mos1_xmm0652010401_pi300-10000_pass1_cl_src16.gif
[Wed Nov 30 10:18:55 2011] Mean detx,y = (44.82, 806.02) 
[Wed Nov 30 10:18:58 2011] Setting backscal keywords in source and bgd. spectrum
[Wed Nov 30 10:19:12 2011] Binned source spectrum to 10 counts/bin
[Wed Nov 30 10:19:12 2011] Setting source spectrum file to fullrun_mos1_xmm0652010401_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Wed Nov 30 10:19:12 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0652010401_pi300-10000_pass1_cl_src16_bgd.pi.gz
[Wed Nov 30 14:29:40 2011] Updating aperture counts using extracted products
[Wed Nov 30 14:29:40 2011] Error reading totcts from fullrun_mos1_xmm0652010401_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Wed Nov 30 14:29:41 2011] Calculating source flux in energy range 0.30-8.00
[Wed Nov 30 14:29:41 2011] Using photon index=1.80, rate=0.00362, arf fullrun_mos1_xmm0652010401_pi300-10000_pass1_cl_src16.arf
[Wed Nov 30 14:29:41 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Nov 30 14:29:41 2011] Updating source flux to 3.3e-14
[Wed Nov 30 14:29:45 2011] Flag b found in src. 16 procflags, skipping spectral fitting
[Wed Nov 30 14:29:45 2011] Flag c found in src. 16 procflags, skipping spectral fitting