[Sat Mar 24 23:32:50 2012] Detection parameters:
  Position = (271.4, 287.1) = 21 2 12.91 -24 31 42.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 351.0 +/- 25.1
  Background counts = 26.9
  Rate = 0.01 +/- 0.001

[Sat Mar 24 23:32:50 2012] Off-axis axis estimate = 2.12'
[Sun Mar 25 03:13:00 2012] Using EEF radius (= 7.49 ")to estimate initial spatial extent for simple fitting
[Sun Mar 25 03:13:00 2012] Initial guess for spatial extent in simple fitting = 7.49"
[Sun Mar 25 03:13:00 2012] source mask rpix=1.7, npix_max = 19, mask sum = 15, frac = 0.760
[Sun Mar 25 03:13:00 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 7.49"
[Sun Mar 25 04:48:38 2012] fullrun_mos2_xmm0652010301_pi300-10000_cl_pass0_src3.ximg exists
[Sun Mar 25 04:48:38 2012] fullrun_mos2_xmm0652010301_pi300-10000_cl_pass0_src3_1.ximg exists
[Sun Mar 25 04:48:38 2012] Fit fullrun_mos2_xmm0652010301_pi300-10000_cl_pass0_src3 appears to have run properly
[Sun Mar 25 04:48:39 2012] fullrun_mos2_xmm0652010301_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Sun Mar 25 04:48:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0652010301_pi300-10000_cl_pass0_tfrozen_src3.csv
[Sun Mar 25 04:48:39 2012] fullrun_mos2_xmm0652010301_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Sun Mar 25 04:48:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0652010301_pi300-10000_cl_pass0_tfrozen_src3.csv
[Sun Mar 25 04:48:39 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0652010301_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0652010301_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 25 04:49:13 2012] Spatial fit model total counts = 2727.830000, observed total counts = 3016.000000
[Sun Mar 25 04:49:13 2012] Offset between fit and detection position for source 3 = 6.621741 pixels
[Sun Mar 25 04:49:13 2012] 2858.620000 total counts/ 1719.160000 bgd. counts: snr = 27.481532
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 6.621741 pixels
  Position = (278.0, 287.5) = 21 2 10.80 -24 31 39.6
  Extent = 14.4" x 14.4", rotation angle = 0
  Source counts = 1139.5 +/- 53.5
  Background counts = 1719.2
  Rate = 0.04 +/- 0.002
[Sun Mar 25 04:49:13 2012] Spatial fit model total counts = 2813.190000, observed total counts = 2257.000000
[Sun Mar 25 04:49:13 2012] Poor agreement between spatial fit and data for source 3
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Mar 25 04:49:13 2012] Vigneting correction estimate = 1.000000
[Sun Mar 25 04:49:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 25 04:49:13 2012] Assessing source extent using major
[Sun Mar 25 04:49:13 2012] Source does appear to be extended
[Sun Mar 25 04:49:13 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar 25 04:49:14 2012] Source is confused with source 2
[Sun Mar 25 07:29:15 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Mar 25 07:29:15 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Mar 25 07:29:15 2012] Initial guess for spatial extent in simple fitting = 14.44"
[Sun Mar 25 07:29:15 2012] source mask rpix=3.3, npix_max = 58, mask sum = 36, frac = 0.617
[Sun Mar 25 07:29:15 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 14.44"
[Sun Mar 25 09:03:28 2012] fullrun_mos2_xmm0652010301_pi300-10000_cl_pass1_src3.ximg exists
[Sun Mar 25 09:03:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0652010301_pi300-10000_cl_pass1_src3.csv
[Sun Mar 25 09:03:28 2012] fullrun_mos2_xmm0652010301_pi300-10000_cl_pass1_src3_1.ximg exists
[Sun Mar 25 09:03:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0652010301_pi300-10000_cl_pass1_src3.csv
[Sun Mar 25 09:03:28 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0652010301_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0652010301_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 25 09:03:29 2012] fullrun_mos2_xmm0652010301_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Sun Mar 25 09:03:29 2012] fullrun_mos2_xmm0652010301_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Sun Mar 25 09:03:29 2012] Fit fullrun_mos2_xmm0652010301_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Sun Mar 25 09:03:54 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 20.247725 pixels away
[Sun Mar 25 09:03:54 2012] Warning, spatial fit 3 centroid is now closest to src. 26
[Sun Mar 25 09:03:54 2012] Spatial fit model total counts = 2783.920000, observed total counts = 2257.000000
[Sun Mar 25 09:03:54 2012] Poor agreement between spatial fit and data for source 3
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Mar 25 09:03:54 2012] Vigneting correction estimate = 1.000000
[Sun Mar 25 09:03:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 25 09:03:54 2012] Assessing source extent using major
[Sun Mar 25 09:03:54 2012] Source does appear to be extended
[Sun Mar 25 09:03:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Mar 26 02:29:50 2012] Counts = 1139.460000, rescaling region sizes by 2.000000
[Mon Mar 26 02:29:50 2012] XMMSAS src. selection expression = ellipse(24140.806000, 24965.977600, 1733.124050, 1733.124050, 0.000000, X, Y)
[Mon Mar 26 02:29:50 2012] Writing source region out to fullrun_mos2_xmm0652010301_pi300-10000_pass1_cl_src3_src.reg
[Mon Mar 26 02:29:50 2012] Extracting stamp from image fullrun_mos2_xmm0652010301_pi300-10000_cl_sm2.00.img.gz, (178, 188) - (378, 387)
[Mon Mar 26 02:29:50 2012] XMMSAS bgd. selection expression = annulus(24140.806000, 24965.977600, 5777.080166, 11554.160332, X, Y) && !ellipse(24407.416260, 24527.298400, 918.168026, 918.168026, 0.000000, X, Y) && !ellipse(23623.526154, 19871.004654, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23386.827637, 24414.451416, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12924.428482, 26637.199463, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27420.767639, 34230.402710, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29733.776062, 26128.888794, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23187.193329, 22216.850479, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17361.316971, 32992.160767, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22089.831223, 36855.568237, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23137.844299, 23807.341797, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33540.570343, 15189.095459, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23302.288000, 25959.442000, 2310.832066, 2310.832066, 0.000000, X, Y) && !ellipse(23842.367000, 26335.298000, 1186.016034, 1186.016034, 0.000000, X, Y)
[Mon Mar 26 02:29:50 2012] Writing fullrun_mos2_xmm0652010301_pi300-10000_pass1_cl_src3.gif
[Mon Mar 26 02:40:29 2012] Mean detx,y = (17.01, 15.17) 
[Mon Mar 26 02:40:32 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Mar 26 02:46:23 2012] Binned source spectrum to 10 counts/bin
[Mon Mar 26 02:46:24 2012] Setting source spectrum file to fullrun_mos2_xmm0652010301_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Mon Mar 26 02:46:24 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0652010301_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Mon Mar 26 05:47:12 2012] Updating aperture counts using extracted products
[Mon Mar 26 05:47:12 2012] Error reading totcts from fullrun_mos2_xmm0652010301_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Mon Mar 26 05:47:13 2012] Calculating source flux in energy range 0.30-8.00
[Mon Mar 26 05:47:13 2012] Using photon index=1.80, rate=0.0399, arf fullrun_mos2_xmm0652010301_pi300-10000_pass1_cl_src3.arf
[Mon Mar 26 05:47:13 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Mar 26 05:47:13 2012] Updating source flux to 3.5e-13
[Mon Mar 26 05:48:43 2012] Flag p found in src. 3 procflags, skipping spectral fitting
[Mon Mar 26 05:48:43 2012] Flag c found in src. 3 procflags, skipping spectral fitting