[Sat Mar 24 23:32:50 2012] Detection parameters:
  Position = (275.5, 303.0) = 21 2 11.61 -24 30 31.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 104.7 +/- 15.5
  Background counts = 25.3
  Rate = 0.004 +/- 0.0006

[Sat Mar 24 23:32:50 2012] Off-axis axis estimate = 1.70'
[Sun Mar 25 03:13:00 2012] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Sun Mar 25 03:13:00 2012] Initial guess for spatial extent in simple fitting = 7.28"
[Sun Mar 25 03:13:00 2012] source mask rpix=1.7, npix_max = 18, mask sum = 17, frac = 0.900
[Sun Mar 25 03:13:00 2012] Giving source the simple spatial ID 15 for pass 0, mean size = 7.28"
[Sun Mar 25 04:48:39 2012] fullrun_mos2_xmm0652010301_pi300-10000_cl_pass0_src15.ximg exists
[Sun Mar 25 04:48:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0652010301_pi300-10000_cl_pass0_src15.csv
[Sun Mar 25 04:48:39 2012] fullrun_mos2_xmm0652010301_pi300-10000_cl_pass0_src15_1.ximg exists
[Sun Mar 25 04:48:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0652010301_pi300-10000_cl_pass0_src15.csv
[Sun Mar 25 04:48:39 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0652010301_pi300-10000_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0652010301_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 25 04:48:39 2012] fullrun_mos2_xmm0652010301_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Sun Mar 25 04:48:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0652010301_pi300-10000_cl_pass0_tfrozen_src15.csv
[Sun Mar 25 04:48:39 2012] fullrun_mos2_xmm0652010301_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Sun Mar 25 04:48:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0652010301_pi300-10000_cl_pass0_tfrozen_src15.csv
[Sun Mar 25 04:48:39 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0652010301_pi300-10000_cl_pass0_tfrozen_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0652010301_pi300-10000_cl_pass0_tfrozen_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 25 04:49:13 2012] Warning, spatial fit 15 centroid is now closest to src. 22
[Sun Mar 25 04:49:13 2012] Warning: source 22 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 24 at 11.784108 pixels away
[Sun Mar 25 04:49:13 2012] Spatial fit model total counts = 557.440000, observed total counts = 516.000000
[Sun Mar 25 04:49:13 2012] Offset between fit and detection position for source 24 = 1.018667 pixels
[Sun Mar 25 04:49:13 2012] Warning, changing simple spatial fit ID from 15 to 27
[Sun Mar 25 04:49:13 2012] 549.090600 total counts/ 469.131000 bgd. counts: snr = 3.691676
Spatial fit parameters:
  Offset between fit and detection position for source 24 = 1.018667 pixels
  Position = (274.5, 303.2) = 21 2 11.93 -24 30 31.3
  Extent = 14.8 (14.8-29.7)", rotation angle = 0
  Source counts = 80.0 +/- 23.4
  Background counts = 469.1
  Rate = 0.003 +/- 0.0008
[Sun Mar 25 04:49:14 2012] Vigneting correction estimate = 1.000000
[Sun Mar 25 04:49:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 25 04:49:14 2012] Assessing source extent using major axis lower bound
[Sun Mar 25 04:49:14 2012] Source does appear to be extended
[Sun Mar 25 04:49:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar 25 04:49:14 2012] Source is confused with source 26
[Sun Mar 25 07:29:15 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Mar 25 07:29:15 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Mar 25 07:29:15 2012] Initial guess for spatial extent in simple fitting = 14.83"
[Sun Mar 25 07:29:15 2012] source mask rpix=3.4, npix_max = 61, mask sum = 50, frac = 0.818
[Sun Mar 25 07:29:15 2012] Giving source the simple spatial ID 15 for pass 1, mean size = 14.83"
[Sun Mar 25 09:03:29 2012] fullrun_mos2_xmm0652010301_pi300-10000_cl_pass1_src15.ximg exists
[Sun Mar 25 09:03:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0652010301_pi300-10000_cl_pass1_src15.csv
[Sun Mar 25 09:03:29 2012] fullrun_mos2_xmm0652010301_pi300-10000_cl_pass1_src15_1.ximg exists
[Sun Mar 25 09:03:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0652010301_pi300-10000_cl_pass1_src15.csv
[Sun Mar 25 09:03:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0652010301_pi300-10000_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0652010301_pi300-10000_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 25 09:03:29 2012] fullrun_mos2_xmm0652010301_pi300-10000_cl_pass1_tfrozen_src15.ximg exists
[Sun Mar 25 09:03:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0652010301_pi300-10000_cl_pass1_tfrozen_src15.csv
[Sun Mar 25 09:03:29 2012] fullrun_mos2_xmm0652010301_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists
[Sun Mar 25 09:03:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0652010301_pi300-10000_cl_pass1_tfrozen_src15.csv
[Sun Mar 25 09:03:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0652010301_pi300-10000_cl_pass1_tfrozen_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0652010301_pi300-10000_cl_pass1_tfrozen_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 25 09:03:54 2012] Warning, spatial fit 15 centroid is now closest to src. 22
[Sun Mar 25 09:03:54 2012] Spatial fit model total counts = 554.957000, observed total counts = 516.000000
[Sun Mar 25 09:03:54 2012] Offset between fit and detection position for source 24 = 0.119042 pixels
[Sun Mar 25 09:03:54 2012] Warning, changing simple spatial fit ID from 15 to 22
[Sun Mar 25 09:03:54 2012] 519.301400 total counts/ 433.460000 bgd. counts: snr = 4.123085
Spatial fit parameters:
  Offset between fit and detection position for source 24 = 0.119042 pixels
  Position = (274.6, 303.3) = 21 2 11.89 -24 30 31.1
  Extent = 14.8 (14.8-29.7)", rotation angle = 0
  Source counts = 85.8 +/- 22.8
  Background counts = 433.5
  Rate = 0.003 +/- 0.0008
[Sun Mar 25 09:03:54 2012] Vigneting correction estimate = 1.000000
[Sun Mar 25 09:03:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 25 09:03:54 2012] Assessing source extent using major axis lower bound
[Sun Mar 25 09:03:54 2012] Source does appear to be extended
[Sun Mar 25 09:03:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Mar 26 02:29:50 2012] XMMSAS src. selection expression = ellipse(23842.367000, 26335.298000, 889.512026, 889.512026, 0.000000, X, Y)
[Mon Mar 26 02:29:50 2012] Writing source region out to fullrun_mos2_xmm0652010301_pi300-10000_pass1_cl_src24_src.reg
[Mon Mar 26 02:29:50 2012] Extracting stamp from image fullrun_mos2_xmm0652010301_pi300-10000_cl_sm2.00.img.gz, (223, 252) - (326, 354)
[Mon Mar 26 02:29:50 2012] XMMSAS bgd. selection expression = annulus(23842.367000, 26335.298000, 1482.520043, 2965.040085, X, Y) && !ellipse(24407.416260, 24527.298400, 918.168026, 918.168026, 0.000000, X, Y) && !ellipse(24140.806000, 24965.977600, 1155.416033, 1155.416033, 0.000000, X, Y) && !ellipse(23386.827637, 24414.451416, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23137.844299, 23807.341797, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23302.288000, 25959.442000, 2310.832066, 2310.832066, 0.000000, X, Y)
[Mon Mar 26 02:29:50 2012] Writing fullrun_mos2_xmm0652010301_pi300-10000_pass1_cl_src24.gif
[Mon Mar 26 03:05:19 2012] Mean detx,y = (-844.00, -1312.84) 
[Mon Mar 26 03:05:22 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Mar 26 03:05:37 2012] Binned source spectrum to 10 counts/bin
[Mon Mar 26 03:05:37 2012] Setting source spectrum file to fullrun_mos2_xmm0652010301_pi300-10000_pass1_cl_src24_src_b10.pi.gz
[Mon Mar 26 03:05:37 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0652010301_pi300-10000_pass1_cl_src24_bgd.pi.gz
[Mon Mar 26 05:45:57 2012] Not generating rmf since there are only 85 counts
[Mon Mar 26 05:45:57 2012] rmf not generated due to insufficient counts
[Mon Mar 26 05:47:12 2012] Updating aperture counts using extracted products
[Mon Mar 26 05:47:13 2012] Error reading totcts from fullrun_mos2_xmm0652010301_pi300-10000_pass1_cl_src24_src_b10.pi.gz
[Mon Mar 26 05:47:14 2012] Calculating source flux in energy range 0.30-8.00
[Mon Mar 26 05:47:14 2012] Using photon index=1.80, rate=0.003, arf fullrun_mos2_xmm0652010301_pi300-10000_pass1_cl_src24.arf
[Mon Mar 26 05:47:14 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Mar 26 05:47:14 2012] Updating source flux to 3e-14
[Mon Mar 26 05:48:43 2012] Flag c found in src. 24 procflags, skipping spectral fitting
[Mon Mar 26 05:48:43 2012] Source 24 has fewer than 100.000000 counts, skipping spectral fitting