[Sat Mar 24 23:32:16 2012] Detection parameters:
  Position = (299.5, 273.2) = 21 2 3.96 -24 32 41.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 58.2 +/- 13.3
  Background counts = 32.5
  Rate = 0.002 +/- 0.0005

[Sat Mar 24 23:32:16 2012] Off-axis axis estimate = 1.83'
[Sun Mar 25 02:25:47 2012] Using EEF radius (= 7.35 ")to estimate initial spatial extent for simple fitting
[Sun Mar 25 02:25:47 2012] Initial guess for spatial extent in simple fitting = 7.35"
[Sun Mar 25 02:25:47 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.044
[Sun Mar 25 02:25:47 2012] Giving source the simple spatial ID 15 for pass 0, mean size = 7.35"
[Sun Mar 25 03:13:00 2012] fullrun_mos1_xmm0652010301_pi300-10000_cl_pass0_src15.ximg exists
[Sun Mar 25 03:13:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0652010301_pi300-10000_cl_pass0_src15.csv
[Sun Mar 25 03:13:00 2012] fullrun_mos1_xmm0652010301_pi300-10000_cl_pass0_src15_1.ximg exists
[Sun Mar 25 03:13:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0652010301_pi300-10000_cl_pass0_src15.csv
[Sun Mar 25 03:13:00 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0652010301_pi300-10000_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0652010301_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 25 03:13:00 2012] fullrun_mos1_xmm0652010301_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Sun Mar 25 03:13:00 2012] fullrun_mos1_xmm0652010301_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Sun Mar 25 03:13:00 2012] Fit fullrun_mos1_xmm0652010301_pi300-10000_cl_pass0_tfrozen_src15 appears to have run properly
[Sun Mar 25 04:49:04 2012] Spatial fit model total counts = 1347.280000, observed total counts = 1311.000000
[Sun Mar 25 04:49:04 2012] Offset between fit and detection position for source 17 = 4.735775 pixels
[Sun Mar 25 04:49:04 2012] Warning, changing simple spatial fit ID from 15 to 12
[Sun Mar 25 04:49:04 2012] 1315.727000 total counts/ 928.469000 bgd. counts: snr = 12.709156
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 4.735775 pixels
  Position = (300.8, 268.6) = 21 2 3.54 -24 33 1.8
  Extent = 14.6 (14.6-14.6)", rotation angle = 0
  Source counts = 387.3 +/- 36.3
  Background counts = 928.5
  Rate = 0.01 +/- 0.001
[Sun Mar 25 04:49:04 2012] Vigneting correction estimate = 1.000000
[Sun Mar 25 04:49:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 25 04:49:04 2012] Assessing source extent using major axis lower bound
[Sun Mar 25 04:49:04 2012] Source does appear to be extended
[Sun Mar 25 04:49:04 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar 25 04:49:04 2012] Source is confused with source 18
[Sun Mar 25 06:46:35 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Mar 25 06:46:35 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Mar 25 06:46:35 2012] Initial guess for spatial extent in simple fitting = 14.59"
[Sun Mar 25 06:46:35 2012] source mask rpix=3.4, npix_max = 59, mask sum = 56, frac = 0.942
[Sun Mar 25 06:46:35 2012] Giving source the simple spatial ID 15 for pass 1, mean size = 14.59"
[Sun Mar 25 07:29:14 2012] fullrun_mos1_xmm0652010301_pi300-10000_cl_pass1_src15.ximg exists
[Sun Mar 25 07:29:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0652010301_pi300-10000_cl_pass1_src15.csv
[Sun Mar 25 07:29:14 2012] fullrun_mos1_xmm0652010301_pi300-10000_cl_pass1_src15_1.ximg exists
[Sun Mar 25 07:29:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0652010301_pi300-10000_cl_pass1_src15.csv
[Sun Mar 25 07:29:14 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0652010301_pi300-10000_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0652010301_pi300-10000_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 25 07:29:14 2012] fullrun_mos1_xmm0652010301_pi300-10000_cl_pass1_tfrozen_src15.ximg exists
[Sun Mar 25 07:29:14 2012] fullrun_mos1_xmm0652010301_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists
[Sun Mar 25 07:29:14 2012] Fit fullrun_mos1_xmm0652010301_pi300-10000_cl_pass1_tfrozen_src15 appears to have run properly
[Sun Mar 25 09:03:48 2012] Warning, spatial fit 15 centroid is now closest to src. 18
[Sun Mar 25 09:03:48 2012] Vigneting correction estimate = 1.000000
[Sun Mar 25 09:03:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 25 09:03:48 2012] Assessing source extent using major axis lower bound
[Sun Mar 25 09:03:48 2012] Source does appear to be extended
[Sun Mar 25 09:03:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Mar 26 01:11:37 2012] XMMSAS src. selection expression = ellipse(26123.998000, 23321.164000, 875.448025, 875.448025, 0.000000, X, Y)
[Mon Mar 26 01:11:37 2012] Writing source region out to fullrun_mos1_xmm0652010301_pi300-10000_pass1_cl_src17_src.reg
[Mon Mar 26 01:11:37 2012] Extracting stamp from image fullrun_mos1_xmm0652010301_pi300-10000_cl_sm2.00.img.gz, (251, 218) - (351, 319)
[Mon Mar 26 01:11:37 2012] XMMSAS bgd. selection expression = annulus(26123.998000, 23321.164000, 1459.080042, 2918.160084, X, Y) && !ellipse(24399.071636, 24523.304600, 1105.008032, 1105.008032, 0.000000, X, Y) && !ellipse(23618.893127, 19870.623657, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23114.456000, 22262.701200, 317.775209, 317.775209, 0.000000, X, Y) && !ellipse(25858.330000, 26311.684000, 1064.360031, 1064.360031, 0.000000, X, Y) && !ellipse(25545.847015, 23537.715607, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24004.252045, 22592.440216, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26329.755035, 24907.978882, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Mar 26 01:11:37 2012] Writing fullrun_mos1_xmm0652010301_pi300-10000_pass1_cl_src17.gif
[Mon Mar 26 01:28:49 2012] Mean detx,y = (986.87, -2081.14) 
[Mon Mar 26 01:28:51 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Mar 26 01:29:04 2012] Binned source spectrum to 10 counts/bin
[Mon Mar 26 01:29:04 2012] Setting source spectrum file to fullrun_mos1_xmm0652010301_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Mon Mar 26 01:29:04 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0652010301_pi300-10000_pass1_cl_src17_bgd.pi.gz
[Mon Mar 26 05:47:10 2012] Updating aperture counts using extracted products
[Mon Mar 26 05:47:10 2012] Error reading totcts from fullrun_mos1_xmm0652010301_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Mon Mar 26 05:47:11 2012] Calculating source flux in energy range 0.30-8.00
[Mon Mar 26 05:47:11 2012] Using photon index=1.80, rate=0.0135, arf fullrun_mos1_xmm0652010301_pi300-10000_pass1_cl_src17.arf
[Mon Mar 26 05:47:11 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Mar 26 05:47:11 2012] Updating source flux to 1.3e-13
[Mon Mar 26 05:47:15 2012] Flag c found in src. 17 procflags, skipping spectral fitting