[Sun Jul 14 13:34:46 2013] Detection parameters:
  Position = (490.7, 306.2) = 7 3 12.58 -3 51 40.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 102.4 +/- 18.8
  Background counts = 88.3
  Rate = 0.0009 +/- 0.0002

[Sun Jul 14 13:34:46 2013] Off-axis axis estimate = 13.95'
[Sun Jul 14 13:35:05 2013] Using EEF radius (= 13.40 ")to estimate initial spatial extent for simple fitting
[Sun Jul 14 13:35:05 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Jul 14 13:35:05 2013] Initial guess for spatial extent in simple fitting = 13.40"
[Sun Jul 14 13:35:05 2013] source mask rpix=3.1, npix_max = 51, mask sum = 49, frac = 0.955
[Sun Jul 14 13:35:05 2013] Giving source the simple spatial ID 12 for pass 0, mean size = 13.40"
[Sun Jul 14 13:35:06 2013] fullrun_mos1_xmm0651920101_pi300-10000_cl_pass0_src12.ximg exists
[Sun Jul 14 13:35:06 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0651920101_pi300-10000_cl_pass0_src12.csv
[Sun Jul 14 13:35:06 2013] fullrun_mos1_xmm0651920101_pi300-10000_cl_pass0_src12_1.ximg exists
[Sun Jul 14 13:35:06 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0651920101_pi300-10000_cl_pass0_src12.csv
[Sun Jul 14 13:35:06 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0651920101_pi300-10000_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0651920101_pi300-10000_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 14 13:35:06 2013] fullrun_mos1_xmm0651920101_pi300-10000_cl_pass0_tfrozen_src12.ximg exists
[Sun Jul 14 13:35:06 2013] fullrun_mos1_xmm0651920101_pi300-10000_cl_pass0_tfrozen_src12_1.ximg exists
[Sun Jul 14 13:35:06 2013] Fit fullrun_mos1_xmm0651920101_pi300-10000_cl_pass0_tfrozen_src12 appears to have run properly
[Sun Jul 14 13:35:16 2013] Warning: source 12 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 13.458545 pixels away
[Sun Jul 14 13:35:16 2013] Vigneting correction estimate = 1.000000
[Sun Jul 14 13:35:16 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 14 13:35:16 2013] Assessing source extent using major
[Sun Jul 14 13:35:16 2013] Source does appear to be extended
[Sun Jul 14 13:35:16 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 14 13:35:29 2013] Using EEF radius (= 13.40 ")to estimate initial spatial extent for simple fitting
[Sun Jul 14 13:35:29 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Jul 14 13:35:29 2013] Initial guess for spatial extent in simple fitting = 13.40"
[Sun Jul 14 13:35:29 2013] source mask rpix=3.1, npix_max = 51, mask sum = 49, frac = 0.955
[Sun Jul 14 13:35:29 2013] Giving source the simple spatial ID 12 for pass 1, mean size = 13.40"
[Sun Jul 14 13:35:30 2013] fullrun_mos1_xmm0651920101_pi300-10000_cl_pass1_src12.ximg exists
[Sun Jul 14 13:35:30 2013] fullrun_mos1_xmm0651920101_pi300-10000_cl_pass1_src12_1.ximg exists
[Sun Jul 14 13:35:30 2013] Fit fullrun_mos1_xmm0651920101_pi300-10000_cl_pass1_src12 appears to have run properly
[Sun Jul 14 13:35:30 2013] fullrun_mos1_xmm0651920101_pi300-10000_cl_pass1_tfrozen_src12.ximg exists
[Sun Jul 14 13:35:30 2013] fullrun_mos1_xmm0651920101_pi300-10000_cl_pass1_tfrozen_src12_1.ximg exists
[Sun Jul 14 13:35:30 2013] Fit fullrun_mos1_xmm0651920101_pi300-10000_cl_pass1_tfrozen_src12 appears to have run properly
[Sun Jul 14 13:35:40 2013] Warning: source 12 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 16.725000 pixels away
[Sun Jul 14 13:35:40 2013] Vigneting correction estimate = 1.000000
[Sun Jul 14 13:35:40 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 14 13:35:40 2013] Assessing source extent using major
[Sun Jul 14 13:35:40 2013] Source does appear to be extended
[Sun Jul 14 13:35:40 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 14 14:01:32 2013] XMMSAS src. selection expression = ellipse(42642.955963, 26592.653381, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jul 14 14:01:32 2013] Writing source region out to fullrun_mos1_xmm0651920101_pi300-10000_pass1_cl_src5_src.reg
[Sun Jul 14 14:01:32 2013] Extracting stamp from image fullrun_mos1_xmm0651920101_pi300-10000_cl_sm2.00.img.gz, (453, 269) - (528, 344)
[Sun Jul 14 14:01:32 2013] XMMSAS bgd. selection expression = annulus(42642.955963, 26592.653381, 1087.500000, 2175.000000, X, Y) && !ellipse(42048.935638, 24118.651947, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jul 14 14:01:32 2013] Writing fullrun_mos1_xmm0651920101_pi300-10000_pass1_cl_src5.gif
[Sun Jul 14 14:04:23 2013] Mean detx,y = (-1119.84, 15344.69) 
[Sun Jul 14 14:04:24 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jul 14 14:04:36 2013] Binned source spectrum to 10 counts/bin
[Sun Jul 14 14:04:36 2013] Setting source spectrum file to fullrun_mos1_xmm0651920101_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Sun Jul 14 14:04:36 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0651920101_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Sun Jul 14 14:06:11 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jul 14 14:06:11 2013] rmf not generated due to insufficient counts
[Sun Jul 14 14:30:28 2013] Updating aperture counts using extracted products
[Sun Jul 14 14:30:28 2013] Total counts from fullrun_mos1_xmm0651920101_pi300-10000_pass1_cl_src5_src_b10.pi.gz = 380.00
[Sun Jul 14 14:30:28 2013] Total counts from fullrun_mos1_xmm0651920101_pi300-10000_pass1_cl_src5_bgd.pi.gz = 1991.00
[Sun Jul 14 14:30:28 2013] Got source and background scale factors 1289724.000000, 7863947.000000
[Sun Jul 14 14:30:28 2013] User source parameters:
  Position = (490.7, 306.2) = 7 3 12.58 -3 51 40.7
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 53.5 +/- 20.5
  Background aperture counts = 326.5
  Rate = 0.0005 +/- 0.0002

[Sun Jul 14 14:30:28 2013] Updating counts from extracted products
[Sun Jul 14 14:30:28 2013] Set source signif. to 53.47/18.07 = 2.96
[Sun Jul 14 14:30:29 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jul 14 14:30:29 2013] Using photon index=1.80, rate=0.000518, arf fullrun_mos1_xmm0651920101_pi300-10000_pass1_cl_src5.arf
[Sun Jul 14 14:30:29 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jul 14 14:30:29 2013] Updating source flux to 1.6e-14
[Sun Jul 14 14:30:34 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jul 14 14:30:35 2013] xmm0651920101/analysis//spectral/fullrun_mos1_xmm0651920101_pi300-10000_pass1_cl_src5_pl.csv not found, spectral fit skipped or did not complete