[Sat Jun 23 01:37:27 2012] Detection parameters:
  Position = (300.1, 262.3) = 12 25 22.41 18 10 44.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 371.6 +/- 26.3
  Background counts = 109.0
  Rate = 0.02 +/- 0.001

[Sat Jun 23 01:37:28 2012] Off-axis axis estimate = 2.62'
[Sat Jun 23 01:40:24 2012] Using EEF radius (= 7.74 ")to estimate initial spatial extent for simple fitting
[Sat Jun 23 01:40:24 2012] Initial guess for spatial extent in simple fitting = 7.74"
[Sat Jun 23 01:40:24 2012] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.770
[Sat Jun 23 01:40:24 2012] Giving source the simple spatial ID 20 for pass 0, mean size = 7.74"
[Sat Jun 23 02:23:49 2012] fullrun_pn_xmm0651910601_pi300-10000_cl_pass0_src20.ximg exists
[Sat Jun 23 02:23:49 2012] fullrun_pn_xmm0651910601_pi300-10000_cl_pass0_src20_1.ximg exists
[Sat Jun 23 02:23:49 2012] Fit fullrun_pn_xmm0651910601_pi300-10000_cl_pass0_src20 appears to have run properly
[Sat Jun 23 02:23:49 2012] fullrun_pn_xmm0651910601_pi300-10000_cl_pass0_tfrozen_src20.ximg exists
[Sat Jun 23 02:23:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0651910601_pi300-10000_cl_pass0_tfrozen_src20.csv
[Sat Jun 23 02:23:49 2012] fullrun_pn_xmm0651910601_pi300-10000_cl_pass0_tfrozen_src20_1.ximg exists
[Sat Jun 23 02:23:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0651910601_pi300-10000_cl_pass0_tfrozen_src20.csv
[Sat Jun 23 02:23:49 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0651910601_pi300-10000_cl_pass0_tfrozen_src20_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0651910601_pi300-10000_cl_pass0_tfrozen_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 23 03:17:40 2012] Spatial fit model total counts = 1196.120000, observed total counts = 1113.000000
[Sat Jun 23 03:17:40 2012] Offset between fit and detection position for source 22 = 2.252755 pixels
[Sat Jun 23 03:17:40 2012] 1254.550000 total counts/ 608.460000 bgd. counts: snr = 26.192503
Spatial fit parameters:
  Offset between fit and detection position for source 22 = 2.252755 pixels
  Position = (298.5, 263.9) = 12 25 22.90 18 10 42.8
  Extent = 15.5" x 15.3", rotation angle = 352
  Source counts = 646.1 +/- 35.4
  Background counts = 608.5
  Rate = 0.02 +/- 0.001
[Sat Jun 23 03:17:40 2012] Vigneting correction estimate = 1.000000
[Sat Jun 23 03:17:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 23 03:17:40 2012] Assessing source extent using major
[Sat Jun 23 03:17:40 2012] Source does appear to be extended
[Sat Jun 23 03:17:40 2012] Computing asymmetry using major and minor axis, asym = 1.01
[Sat Jun 23 03:17:53 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jun 23 03:17:53 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jun 23 03:17:53 2012] Initial guess for spatial extent in simple fitting = 15.41"
[Sat Jun 23 03:17:53 2012] source mask rpix=3.5, npix_max = 65, mask sum = 24, frac = 0.367
[Sat Jun 23 03:17:53 2012] Skipping simple spatial due to low active detector fraction
[Sat Jun 23 04:46:40 2012] Vigneting correction estimate = 1.000000
[Sat Jun 23 04:46:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 23 04:46:40 2012] Assessing source extent using major
[Sat Jun 23 04:46:40 2012] Source does appear to be extended
[Sat Jun 23 04:46:40 2012] Computing asymmetry using major and minor axis, asym = 1.01
[Sat Jun 23 04:46:51 2012] XMMSAS src. selection expression = ellipse(25922.817294, 22910.497590, 928.662027, 920.978935, 351.930677, X, Y)
[Sat Jun 23 04:46:51 2012] Writing source region out to fullrun_pn_xmm0651910601_pi300-10000_pass1_cl_src22_src.reg
[Sat Jun 23 04:46:51 2012] Extracting stamp from image fullrun_pn_xmm0651910601_pi300-10000_cl_sm2.00.img.gz, (245, 211) - (352, 317)
[Sat Jun 23 04:46:51 2012] XMMSAS bgd. selection expression = annulus(25922.817294, 22910.497590, 1547.770045, 3095.540089, X, Y) && !ellipse(25596.052000, 23858.920600, 583.028017, 583.028017, 0.000000, X, Y) && !ellipse(25359.495819, 25071.226013, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26625.825317, 24392.372192, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27188.595947, 24014.126099, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26617.966431, 23808.395844, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28031.918213, 19030.596283, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun 23 04:46:51 2012] Writing fullrun_pn_xmm0651910601_pi300-10000_pass1_cl_src22.gif
[Sat Jun 23 04:58:21 2012] Mean detx,y = (183.14, -964.69) 
[Sat Jun 23 04:58:25 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 23 04:58:59 2012] Binned source spectrum to 10 counts/bin
[Sat Jun 23 04:58:59 2012] Setting source spectrum file to fullrun_pn_xmm0651910601_pi300-10000_pass1_cl_src22_src_b10.pi.gz
[Sat Jun 23 04:58:59 2012] Setting bgd. spectrum file to fullrun_pn_xmm0651910601_pi300-10000_pass1_cl_src22_bgd.pi.gz
[Sat Jun 23 06:05:30 2012] Updating aperture counts using extracted products
[Sat Jun 23 06:05:30 2012] Error reading totcts from fullrun_pn_xmm0651910601_pi300-10000_pass1_cl_src22_src_b10.pi.gz
[Sat Jun 23 06:05:30 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jun 23 06:05:30 2012] Using photon index=1.80, rate=0.0246, arf fullrun_pn_xmm0651910601_pi300-10000_pass1_cl_src22.arf
[Sat Jun 23 06:05:30 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 23 06:05:30 2012] Getting flux using calc_pl_flux failed