[Sat Jun 23 01:38:07 2012] Detection parameters:
  Position = (292.0, 258.1) = 12 25 24.88 18 10 20.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 66.0 +/- 12.9
  Background counts = 73.6
  Rate = 0.002 +/- 0.0004

[Sat Jun 23 01:38:07 2012] Off-axis axis estimate = 2.96'
[Sat Jun 23 02:45:51 2012] Using EEF radius (= 7.91 ")to estimate initial spatial extent for simple fitting
[Sat Jun 23 02:45:51 2012] Initial guess for spatial extent in simple fitting = 7.91"
[Sat Jun 23 02:45:51 2012] source mask rpix=1.8, npix_max = 21, mask sum = 15, frac = 0.698
[Sat Jun 23 02:45:51 2012] Giving source the simple spatial ID 14 for pass 0, mean size = 7.91"
[Sat Jun 23 03:17:32 2012] fullrun_mos2_xmm0651910601_pi300-10000_cl_pass0_src14.ximg exists
[Sat Jun 23 03:17:32 2012] fullrun_mos2_xmm0651910601_pi300-10000_cl_pass0_src14_1.ximg exists
[Sat Jun 23 03:17:32 2012] Fit fullrun_mos2_xmm0651910601_pi300-10000_cl_pass0_src14 appears to have run properly
[Sat Jun 23 03:17:33 2012] fullrun_mos2_xmm0651910601_pi300-10000_cl_pass0_tfrozen_src14.ximg exists
[Sat Jun 23 03:17:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0651910601_pi300-10000_cl_pass0_tfrozen_src14.csv
[Sat Jun 23 03:17:33 2012] fullrun_mos2_xmm0651910601_pi300-10000_cl_pass0_tfrozen_src14_1.ximg exists
[Sat Jun 23 03:17:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0651910601_pi300-10000_cl_pass0_tfrozen_src14.csv
[Sat Jun 23 03:17:33 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0651910601_pi300-10000_cl_pass0_tfrozen_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0651910601_pi300-10000_cl_pass0_tfrozen_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 23 03:17:45 2012] Source 15 is offset by 2.707020 and 3.105903 pixels which is larger than
2 X fitted extent = 0.908892 x 0.908892, not incorporating fit results
[Sat Jun 23 03:17:45 2012] Vigneting correction estimate = 1.000000
[Sat Jun 23 03:17:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 23 03:17:45 2012] Assessing source extent using major
[Sat Jun 23 03:17:45 2012] Source does appear to be extended
[Sat Jun 23 03:17:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 23 04:13:52 2012] Using EEF radius (= 7.91 ")to estimate initial spatial extent for simple fitting
[Sat Jun 23 04:13:52 2012] Initial guess for spatial extent in simple fitting = 7.91"
[Sat Jun 23 04:13:52 2012] source mask rpix=1.8, npix_max = 21, mask sum = 15, frac = 0.698
[Sat Jun 23 04:13:52 2012] Giving source the simple spatial ID 14 for pass 1, mean size = 7.91"
[Sat Jun 23 04:46:34 2012] fullrun_mos2_xmm0651910601_pi300-10000_cl_pass1_src14.ximg exists
[Sat Jun 23 04:46:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0651910601_pi300-10000_cl_pass1_src14.csv
[Sat Jun 23 04:46:34 2012] fullrun_mos2_xmm0651910601_pi300-10000_cl_pass1_src14_1.ximg exists
[Sat Jun 23 04:46:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0651910601_pi300-10000_cl_pass1_src14.csv
[Sat Jun 23 04:46:34 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0651910601_pi300-10000_cl_pass1_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0651910601_pi300-10000_cl_pass1_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 23 04:46:34 2012] fullrun_mos2_xmm0651910601_pi300-10000_cl_pass1_tfrozen_src14.ximg exists
[Sat Jun 23 04:46:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0651910601_pi300-10000_cl_pass1_tfrozen_src14.csv
[Sat Jun 23 04:46:34 2012] fullrun_mos2_xmm0651910601_pi300-10000_cl_pass1_tfrozen_src14_1.ximg exists
[Sat Jun 23 04:46:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0651910601_pi300-10000_cl_pass1_tfrozen_src14.csv
[Sat Jun 23 04:46:34 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0651910601_pi300-10000_cl_pass1_tfrozen_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0651910601_pi300-10000_cl_pass1_tfrozen_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 23 04:46:45 2012] Warning, spatial fit 14 centroid is now closest to src. 14
[Sat Jun 23 04:46:45 2012] Vigneting correction estimate = 1.000000
[Sat Jun 23 04:46:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 23 04:46:45 2012] Assessing source extent using major
[Sat Jun 23 04:46:45 2012] Source does appear to be extended
[Sat Jun 23 04:46:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 23 05:55:45 2012] XMMSAS src. selection expression = ellipse(25359.434753, 22410.233521, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun 23 05:55:45 2012] Writing source region out to fullrun_mos2_xmm0651910601_pi300-10000_pass1_cl_src15_src.reg
[Sat Jun 23 05:55:45 2012] Extracting stamp from image fullrun_mos2_xmm0651910601_pi300-10000_cl_sm2.00.img.gz, (255, 221) - (330, 296)
[Sat Jun 23 05:55:45 2012] XMMSAS bgd. selection expression = annulus(25359.434753, 22410.233521, 1087.500000, 2175.000000, X, Y) && !ellipse(25582.843600, 23870.200000, 501.286414, 501.286414, 0.000000, X, Y) && !ellipse(26066.110626, 22903.646820, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24304.356420, 24508.162200, 707.795220, 707.795220, 0.000000, X, Y) && !ellipse(25287.085205, 24561.455078, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26239.295532, 23957.271301, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26088.916600, 24978.014200, 566.900016, 340.330410, 148.864000, X, Y)
[Sat Jun 23 05:55:45 2012] Writing fullrun_mos2_xmm0651910601_pi300-10000_pass1_cl_src15.gif
[Sat Jun 23 05:58:37 2012] Mean detx,y = (-788.66, 1288.89) 
[Sat Jun 23 05:58:38 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 23 05:58:47 2012] Binned source spectrum to 10 counts/bin
[Sat Jun 23 05:58:47 2012] Setting source spectrum file to fullrun_mos2_xmm0651910601_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Sat Jun 23 05:58:47 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0651910601_pi300-10000_pass1_cl_src15_bgd.pi.gz
[Sat Jun 23 06:03:53 2012] Not generating rmf since there are only 66 counts
[Sat Jun 23 06:03:53 2012] rmf not generated due to insufficient counts
[Sat Jun 23 06:05:31 2012] Updating aperture counts using extracted products
[Sat Jun 23 06:05:31 2012] Error reading totcts from fullrun_mos2_xmm0651910601_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Sat Jun 23 06:05:31 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jun 23 06:05:31 2012] Using photon index=1.80, rate=0.00196, arf fullrun_mos2_xmm0651910601_pi300-10000_pass1_cl_src15.arf
[Sat Jun 23 06:05:31 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 23 06:05:32 2012] Updating source flux to 2e-14
[Sat Jun 23 06:06:00 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting