[Sat Jun 23 01:38:07 2012] Detection parameters:
  Position = (300.2, 263.8) = 12 25 22.40 18 10 42.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 166.4 +/- 20.1
  Background counts = 74.3
  Rate = 0.004 +/- 0.0005

[Sat Jun 23 01:38:07 2012] Off-axis axis estimate = 2.51'
[Sat Jun 23 02:45:51 2012] Using EEF radius (= 7.69 ")to estimate initial spatial extent for simple fitting
[Sat Jun 23 02:45:51 2012] Initial guess for spatial extent in simple fitting = 7.69"
[Sat Jun 23 02:45:51 2012] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.779
[Sat Jun 23 02:45:51 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 7.69"
[Sat Jun 23 03:17:32 2012] fullrun_mos2_xmm0651910601_pi300-10000_cl_pass0_src6.ximg exists
[Sat Jun 23 03:17:32 2012] fullrun_mos2_xmm0651910601_pi300-10000_cl_pass0_src6_1.ximg exists
[Sat Jun 23 03:17:32 2012] Fit fullrun_mos2_xmm0651910601_pi300-10000_cl_pass0_src6 appears to have run properly
[Sat Jun 23 03:17:32 2012] fullrun_mos2_xmm0651910601_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Sat Jun 23 03:17:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0651910601_pi300-10000_cl_pass0_tfrozen_src6.csv
[Sat Jun 23 03:17:32 2012] fullrun_mos2_xmm0651910601_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Sat Jun 23 03:17:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0651910601_pi300-10000_cl_pass0_tfrozen_src6.csv
[Sat Jun 23 03:17:32 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0651910601_pi300-10000_cl_pass0_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0651910601_pi300-10000_cl_pass0_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 23 03:17:45 2012] Warning, spatial fit 6 centroid is now closest to src. 12
[Sat Jun 23 03:17:45 2012] Vigneting correction estimate = 1.000000
[Sat Jun 23 03:17:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 23 03:17:45 2012] Assessing source extent using major
[Sat Jun 23 03:17:45 2012] Source does appear to be extended
[Sat Jun 23 03:17:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 23 04:13:52 2012] Using EEF radius (= 7.69 ")to estimate initial spatial extent for simple fitting
[Sat Jun 23 04:13:52 2012] Initial guess for spatial extent in simple fitting = 7.69"
[Sat Jun 23 04:13:52 2012] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.779
[Sat Jun 23 04:13:52 2012] Giving source the simple spatial ID 6 for pass 1, mean size = 7.69"
[Sat Jun 23 04:46:34 2012] fullrun_mos2_xmm0651910601_pi300-10000_cl_pass1_src6.ximg exists
[Sat Jun 23 04:46:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0651910601_pi300-10000_cl_pass1_src6.csv
[Sat Jun 23 04:46:34 2012] fullrun_mos2_xmm0651910601_pi300-10000_cl_pass1_src6_1.ximg exists
[Sat Jun 23 04:46:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0651910601_pi300-10000_cl_pass1_src6.csv
[Sat Jun 23 04:46:34 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0651910601_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0651910601_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 23 04:46:34 2012] fullrun_mos2_xmm0651910601_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Sat Jun 23 04:46:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0651910601_pi300-10000_cl_pass1_tfrozen_src6.csv
[Sat Jun 23 04:46:34 2012] fullrun_mos2_xmm0651910601_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Sat Jun 23 04:46:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0651910601_pi300-10000_cl_pass1_tfrozen_src6.csv
[Sat Jun 23 04:46:34 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0651910601_pi300-10000_cl_pass1_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0651910601_pi300-10000_cl_pass1_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 23 04:46:45 2012] Warning, spatial fit 6 centroid is now closest to src. 12
[Sat Jun 23 04:46:45 2012] Source 14 is offset by 0.992329 and 0.940630 pixels which is larger than
2 X fitted extent = 0.908892 x 1.127623, not incorporating fit results
[Sat Jun 23 04:46:45 2012] Vigneting correction estimate = 1.000000
[Sat Jun 23 04:46:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 23 04:46:45 2012] Assessing source extent using major
[Sat Jun 23 04:46:45 2012] Source does appear to be extended
[Sat Jun 23 04:46:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 23 05:55:45 2012] XMMSAS src. selection expression = ellipse(26066.110626, 22903.646820, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun 23 05:55:45 2012] Writing source region out to fullrun_mos2_xmm0651910601_pi300-10000_pass1_cl_src14_src.reg
[Sat Jun 23 05:55:45 2012] Extracting stamp from image fullrun_mos2_xmm0651910601_pi300-10000_cl_sm2.00.img.gz, (263, 226) - (338, 301)
[Sat Jun 23 05:55:45 2012] XMMSAS bgd. selection expression = annulus(26066.110626, 22903.646820, 1087.500000, 2175.000000, X, Y) && !ellipse(25582.843600, 23870.200000, 501.286414, 501.286414, 0.000000, X, Y) && !ellipse(24304.356420, 24508.162200, 707.795220, 707.795220, 0.000000, X, Y) && !ellipse(25287.085205, 24561.455078, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25359.434753, 22410.233521, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26239.295532, 23957.271301, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26088.916600, 24978.014200, 566.900016, 340.330410, 148.864000, X, Y)
[Sat Jun 23 05:55:45 2012] Writing fullrun_mos2_xmm0651910601_pi300-10000_pass1_cl_src14.gif
[Sat Jun 23 05:56:44 2012] Mean detx,y = (73.16, 1114.45) 
[Sat Jun 23 05:56:45 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 23 05:56:54 2012] Binned source spectrum to 10 counts/bin
[Sat Jun 23 05:56:54 2012] Setting source spectrum file to fullrun_mos2_xmm0651910601_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Sat Jun 23 05:56:54 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0651910601_pi300-10000_pass1_cl_src14_bgd.pi.gz
[Sat Jun 23 06:03:07 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jun 23 06:03:07 2012] rmf not generated due to insufficient counts
[Sat Jun 23 06:05:31 2012] Updating aperture counts using extracted products
[Sat Jun 23 06:05:31 2012] Error reading totcts from fullrun_mos2_xmm0651910601_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Sat Jun 23 06:05:31 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jun 23 06:05:31 2012] Using photon index=1.80, rate=0.00433, arf fullrun_mos2_xmm0651910601_pi300-10000_pass1_cl_src14.arf
[Sat Jun 23 06:05:31 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 23 06:05:31 2012] Updating source flux to 4.2e-14
[Sat Jun 23 06:06:00 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting