[Sat Jun  9 19:04:01 2012] Detection parameters:
  Position = (242.9, 295.9) = 14 45 10.01 1 58 46.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 108.7 +/- 15.4
  Background counts = 38.6
  Rate = 0.001 +/- 0.0002

[Sat Jun  9 19:04:02 2012] Off-axis axis estimate = 4.03'
[Sat Jun  9 21:21:21 2012] Using EEF radius (= 8.44 ")to estimate initial spatial extent for simple fitting
[Sat Jun  9 21:21:21 2012] Initial guess for spatial extent in simple fitting = 8.44"
[Sat Jun  9 21:21:21 2012] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.839
[Sat Jun  9 21:21:21 2012] Giving source the simple spatial ID 17 for pass 0, mean size = 8.44"
[Sat Jun  9 22:41:10 2012] fullrun_mos1_xmm0651890301_pi300-10000_cl_pass0_src17.ximg exists
[Sat Jun  9 22:41:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0651890301_pi300-10000_cl_pass0_src17.csv
[Sat Jun  9 22:41:10 2012] fullrun_mos1_xmm0651890301_pi300-10000_cl_pass0_src17_1.ximg exists
[Sat Jun  9 22:41:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0651890301_pi300-10000_cl_pass0_src17.csv
[Sat Jun  9 22:41:10 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0651890301_pi300-10000_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0651890301_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  9 22:41:11 2012] fullrun_mos1_xmm0651890301_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Sat Jun  9 22:41:11 2012] fullrun_mos1_xmm0651890301_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Sat Jun  9 22:41:11 2012] Fit fullrun_mos1_xmm0651890301_pi300-10000_cl_pass0_tfrozen_src17 appears to have run properly
[Sun Jun 10 00:08:24 2012] Source 22 is offset by -2.516507 and 6.706880 pixels which is larger than
2 X fitted extent = 1.871687 x 1.871687, not incorporating fit results
[Sun Jun 10 00:08:24 2012] Vigneting correction estimate = 1.000000
[Sun Jun 10 00:08:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 10 00:08:24 2012] Assessing source extent using major
[Sun Jun 10 00:08:24 2012] Source does appear to be extended
[Sun Jun 10 00:08:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 10 00:08:24 2012] Source is confused with source 4
[Sun Jun 10 01:56:06 2012] Using EEF radius (= 8.44 ")to estimate initial spatial extent for simple fitting
[Sun Jun 10 01:56:06 2012] Initial guess for spatial extent in simple fitting = 8.44"
[Sun Jun 10 01:56:06 2012] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.839
[Sun Jun 10 01:56:06 2012] Giving source the simple spatial ID 17 for pass 1, mean size = 8.44"
[Sun Jun 10 03:17:10 2012] fullrun_mos1_xmm0651890301_pi300-10000_cl_pass1_src17.ximg exists
[Sun Jun 10 03:17:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0651890301_pi300-10000_cl_pass1_src17.csv
[Sun Jun 10 03:17:10 2012] fullrun_mos1_xmm0651890301_pi300-10000_cl_pass1_src17_1.ximg exists
[Sun Jun 10 03:17:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0651890301_pi300-10000_cl_pass1_src17.csv
[Sun Jun 10 03:17:10 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0651890301_pi300-10000_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0651890301_pi300-10000_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 10 03:17:11 2012] fullrun_mos1_xmm0651890301_pi300-10000_cl_pass1_tfrozen_src17.ximg exists
[Sun Jun 10 03:17:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0651890301_pi300-10000_cl_pass1_tfrozen_src17.csv
[Sun Jun 10 03:17:11 2012] fullrun_mos1_xmm0651890301_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists
[Sun Jun 10 03:17:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0651890301_pi300-10000_cl_pass1_tfrozen_src17.csv
[Sun Jun 10 03:17:11 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0651890301_pi300-10000_cl_pass1_tfrozen_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0651890301_pi300-10000_cl_pass1_tfrozen_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 10 04:27:14 2012] Source 22 is offset by 7.666734 and 1.557846 pixels which is larger than
2 X fitted extent = 0.970543 x 0.970543, not incorporating fit results
[Sun Jun 10 04:27:14 2012] Warning: source 28 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 22 at 22.785214 pixels away
[Sun Jun 10 04:27:14 2012] Warning: source 29 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 22 at 21.508361 pixels away
[Sun Jun 10 04:27:14 2012] Vigneting correction estimate = 1.000000
[Sun Jun 10 04:27:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 10 04:27:14 2012] Assessing source extent using major
[Sun Jun 10 04:27:14 2012] Source does appear to be extended
[Sun Jun 10 04:27:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 10 06:31:43 2012] XMMSAS src. selection expression = ellipse(21084.007889, 25698.500580, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jun 10 06:31:43 2012] Writing source region out to fullrun_mos1_xmm0651890301_pi300-10000_pass1_cl_src22_src.reg
[Sun Jun 10 06:31:43 2012] Extracting stamp from image fullrun_mos1_xmm0651890301_pi300-10000_cl_sm2.00.img.gz, (205, 258) - (280, 333)
[Sun Jun 10 06:31:43 2012] XMMSAS bgd. selection expression = annulus(21084.007889, 25698.500580, 1087.500000, 2175.000000, X, Y) && !ellipse(21306.496000, 25092.266600, 343.376010, 343.376010, 0.000000, X, Y) && !ellipse(18465.799866, 24845.259125, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23422.976200, 26913.880200, 887.440026, 278.983208, 8.763928, X, Y) && !ellipse(23408.454000, 25475.777600, 1214.032035, 1214.032035, 0.000000, X, Y)
[Sun Jun 10 06:31:43 2012] Writing fullrun_mos1_xmm0651890301_pi300-10000_pass1_cl_src22.gif
[Sun Jun 10 06:35:26 2012] Mean detx,y = (-2409.70, 3289.69) 
[Sun Jun 10 06:35:27 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 10 06:35:36 2012] Binned source spectrum to 10 counts/bin
[Sun Jun 10 06:35:36 2012] Setting source spectrum file to fullrun_mos1_xmm0651890301_pi300-10000_pass1_cl_src22_src_b10.pi.gz
[Sun Jun 10 06:35:36 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0651890301_pi300-10000_pass1_cl_src22_bgd.pi.gz
[Sun Jun 10 07:17:50 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jun 10 07:17:50 2012] rmf not generated due to insufficient counts
[Sun Jun 10 08:08:23 2012] Updating aperture counts using extracted products
[Sun Jun 10 08:08:23 2012] Error reading totcts from fullrun_mos1_xmm0651890301_pi300-10000_pass1_cl_src22_src_b10.pi.gz
[Sun Jun 10 08:08:23 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jun 10 08:08:23 2012] Using photon index=1.80, rate=0.00139, arf fullrun_mos1_xmm0651890301_pi300-10000_pass1_cl_src22.arf
[Sun Jun 10 08:08:23 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 10 08:08:23 2012] Updating source flux to 1.5e-14
[Sun Jun 10 08:08:27 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting