[Thu Jun 13 18:32:38 2013] Detection parameters:
  Position = (287.5, 284.5) = 14 44 56.99 1 57 59.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 89.8 +/- 17.9
  Background counts = 85.6
  Rate = 0.001 +/- 0.0002

[Thu Jun 13 18:32:38 2013] Off-axis axis estimate = 1.28'
[Thu Jun 13 20:04:24 2013] Using EEF radius (= 7.07 ")to estimate initial spatial extent for simple fitting
[Thu Jun 13 20:04:24 2013] Initial guess for spatial extent in simple fitting = 7.07"
[Thu Jun 13 20:04:24 2013] source mask rpix=1.6, npix_max = 18, mask sum = 25, frac = 1.384
[Thu Jun 13 20:04:24 2013] Giving source the simple spatial ID 23 for pass 0, mean size = 7.07"
[Thu Jun 13 20:28:38 2013] fullrun_mos2_xmm0651890101_pi300-10000_cl_pass0_src23.ximg exists
[Thu Jun 13 20:28:38 2013] fullrun_mos2_xmm0651890101_pi300-10000_cl_pass0_src23_1.ximg exists
[Thu Jun 13 20:28:38 2013] Fit fullrun_mos2_xmm0651890101_pi300-10000_cl_pass0_src23 appears to have run properly
[Thu Jun 13 20:28:38 2013] fullrun_mos2_xmm0651890101_pi300-10000_cl_pass0_tfrozen_src23.ximg exists
[Thu Jun 13 20:28:38 2013] fullrun_mos2_xmm0651890101_pi300-10000_cl_pass0_tfrozen_src23_1.ximg exists
[Thu Jun 13 20:28:38 2013] Fit fullrun_mos2_xmm0651890101_pi300-10000_cl_pass0_tfrozen_src23 appears to have run properly
[Thu Jun 13 20:28:53 2013] Warning, spatial fit 23 centroid is now closest to src. 2
[Thu Jun 13 20:28:53 2013] Vigneting correction estimate = 1.000000
[Thu Jun 13 20:28:53 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 13 20:28:53 2013] Assessing source extent using major
[Thu Jun 13 20:28:53 2013] Source does appear to be extended
[Thu Jun 13 20:28:53 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 13 20:28:53 2013] Source is confused with source 2
[Thu Jun 13 21:51:02 2013] Using EEF radius (= 7.07 ")to estimate initial spatial extent for simple fitting
[Thu Jun 13 21:51:02 2013] Initial guess for spatial extent in simple fitting = 7.07"
[Thu Jun 13 21:51:02 2013] source mask rpix=1.6, npix_max = 18, mask sum = 25, frac = 1.384
[Thu Jun 13 21:51:02 2013] Giving source the simple spatial ID 23 for pass 1, mean size = 7.07"
[Thu Jun 13 22:16:25 2013] fullrun_mos2_xmm0651890101_pi300-10000_cl_pass1_src23.ximg exists
[Thu Jun 13 22:16:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0651890101_pi300-10000_cl_pass1_src23.csv
[Thu Jun 13 22:16:25 2013] fullrun_mos2_xmm0651890101_pi300-10000_cl_pass1_src23_1.ximg exists
[Thu Jun 13 22:16:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0651890101_pi300-10000_cl_pass1_src23.csv
[Thu Jun 13 22:16:25 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0651890101_pi300-10000_cl_pass1_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0651890101_pi300-10000_cl_pass1_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 22:16:25 2013] fullrun_mos2_xmm0651890101_pi300-10000_cl_pass1_tfrozen_src23.ximg exists
[Thu Jun 13 22:16:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0651890101_pi300-10000_cl_pass1_tfrozen_src23.csv
[Thu Jun 13 22:16:25 2013] fullrun_mos2_xmm0651890101_pi300-10000_cl_pass1_tfrozen_src23_1.ximg exists
[Thu Jun 13 22:16:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0651890101_pi300-10000_cl_pass1_tfrozen_src23.csv
[Thu Jun 13 22:16:25 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0651890101_pi300-10000_cl_pass1_tfrozen_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0651890101_pi300-10000_cl_pass1_tfrozen_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 22:16:36 2013] Source 15 is offset by 6.833413 and -3.820657 pixels which is larger than
2 X fitted extent = 1.167858 x 1.167858, not incorporating fit results
[Thu Jun 13 22:16:36 2013] Spatial fit model total counts = 1110.830000, observed total counts = 984.000000
[Thu Jun 13 22:16:36 2013] Poor agreement between spatial fit and data for source 15
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Jun 13 22:16:36 2013] Vigneting correction estimate = 1.000000
[Thu Jun 13 22:16:36 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 13 22:16:36 2013] Assessing source extent using major
[Thu Jun 13 22:16:36 2013] Source does appear to be extended
[Thu Jun 13 22:16:36 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 13 23:33:42 2013] XMMSAS src. selection expression = ellipse(24963.176941, 24704.932861, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jun 13 23:33:42 2013] Writing source region out to fullrun_mos2_xmm0651890101_pi300-10000_pass1_cl_src15_src.reg
[Thu Jun 13 23:33:42 2013] Extracting stamp from image fullrun_mos2_xmm0651890101_pi300-10000_cl_sm2.00.img.gz, (250, 247) - (325, 322)
[Thu Jun 13 23:33:42 2013] XMMSAS bgd. selection expression = annulus(24963.176941, 24704.932861, 1087.500000, 2175.000000, X, Y) && !ellipse(25219.798000, 24180.872000, 1034.368030, 591.292817, 59.532100, X, Y) && !ellipse(26945.786400, 24994.484400, 293.436144, 293.436144, 0.000000, X, Y)
[Thu Jun 13 23:33:42 2013] Writing fullrun_mos2_xmm0651890101_pi300-10000_pass1_cl_src15.gif
[Thu Jun 13 23:40:23 2013] Mean detx,y = (4.93, -633.46) 
[Thu Jun 13 23:40:24 2013] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 13 23:40:33 2013] Binned source spectrum to 10 counts/bin
[Thu Jun 13 23:40:34 2013] Setting source spectrum file to fullrun_mos2_xmm0651890101_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Thu Jun 13 23:40:34 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0651890101_pi300-10000_pass1_cl_src15_bgd.pi.gz
[Fri Jun 14 00:00:18 2013] Not generating rmf since there are only 89 counts
[Fri Jun 14 00:00:18 2013] rmf not generated due to insufficient counts
[Fri Jun 14 00:02:03 2013] Updating aperture counts using extracted products
[Fri Jun 14 00:02:03 2013] Total counts from fullrun_mos2_xmm0651890101_pi300-10000_pass1_cl_src15_src_b10.pi.gz = 644.00
[Fri Jun 14 00:02:03 2013] Total counts from fullrun_mos2_xmm0651890101_pi300-10000_pass1_cl_src15_bgd.pi.gz = 3342.00
[Fri Jun 14 00:02:03 2013] Got source and background scale factors 1210120.000000, 10296988.000000
[Fri Jun 14 00:02:03 2013] User source parameters:
  Position = (287.5, 284.5) = 14 44 56.99 1 57 59.0
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 251.2 +/- 26.4
  Background aperture counts = 392.8
  Rate = 0.003 +/- 0.0003

[Fri Jun 14 00:02:03 2013] Updating counts from extracted products
[Fri Jun 14 00:02:03 2013] Set source signif. to 251.24/19.82 = 12.68
[Fri Jun 14 00:02:03 2013] Calculating source flux in energy range 0.30-8.00
[Fri Jun 14 00:02:03 2013] Using photon index=1.80, rate=0.00314, arf fullrun_mos2_xmm0651890101_pi300-10000_pass1_cl_src15.arf
[Fri Jun 14 00:02:03 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 14 00:02:03 2013] Updating source flux to 3.5e-14
[Fri Jun 14 00:02:10 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri Jun 14 00:02:13 2013] xmm0651890101/analysis//spectral/fullrun_mos2_xmm0651890101_pi300-10000_pass1_cl_src15_pl.csv not found, spectral fit skipped or did not complete