[Sat Jun  9 07:08:32 2012] Detection parameters:
  Position = (192.6, 139.9) = 16 55 20.01 -37 3 11.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 619.9 +/- 30.3
  Background counts = 9.6
  Rate = 0.02 +/- 0.001

[Sat Jun  9 07:08:32 2012] Off-axis axis estimate = 13.82'
[Sat Jun  9 07:25:57 2012] Using EEF radius (= 13.34 ")to estimate initial spatial extent for simple fitting
[Sat Jun  9 07:25:57 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jun  9 07:25:57 2012] Initial guess for spatial extent in simple fitting = 13.34"
[Sat Jun  9 07:25:57 2012] source mask rpix=3.1, npix_max = 50, mask sum = 49, frac = 0.963
[Sat Jun  9 07:25:57 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 13.34"
[Sat Jun  9 07:37:10 2012] fullrun_mos1_xmm0651870401_pi300-10000_cl_pass0_src1.ximg exists
[Sat Jun  9 07:37:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0651870401_pi300-10000_cl_pass0_src1.csv
[Sat Jun  9 07:37:10 2012] fullrun_mos1_xmm0651870401_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat Jun  9 07:37:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0651870401_pi300-10000_cl_pass0_src1.csv
[Sat Jun  9 07:37:10 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0651870401_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0651870401_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  9 07:37:10 2012] fullrun_mos1_xmm0651870401_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat Jun  9 07:37:10 2012] fullrun_mos1_xmm0651870401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Jun  9 07:37:10 2012] Fit fullrun_mos1_xmm0651870401_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Jun  9 07:51:57 2012] Spatial fit model total counts = 818.540000, observed total counts = 816.000000
[Sat Jun  9 07:51:57 2012] Offset between fit and detection position for source 3 = 0.176713 pixels
[Sat Jun  9 07:51:57 2012] 819.629000 total counts/ 340.800000 bgd. counts: snr = 25.937652
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.176713 pixels
  Position = (192.7, 140.0) = 16 55 19.95 -37 3 11.6
  Extent = 7.3 (6.7-7.9)", rotation angle = 0
  Source counts = 478.8 +/- 28.6
  Background counts = 340.8
  Rate = 0.02 +/- 0.001
[Sat Jun  9 07:51:57 2012] Vigneting correction estimate = 1.000000
[Sat Jun  9 07:51:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  9 07:51:57 2012] Assessing source extent using major axis lower bound
[Sat Jun  9 07:51:57 2012] Source does appear to be extended
[Sat Jun  9 07:51:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  9 08:09:01 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jun  9 08:09:01 2012] Initial guess for spatial extent in simple fitting = 7.31"
[Sat Jun  9 08:09:01 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.841
[Sat Jun  9 08:09:01 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 7.31"
[Sat Jun  9 08:18:22 2012] fullrun_mos1_xmm0651870401_pi300-10000_cl_pass1_src1.ximg exists
[Sat Jun  9 08:18:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0651870401_pi300-10000_cl_pass1_src1.csv
[Sat Jun  9 08:18:22 2012] fullrun_mos1_xmm0651870401_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat Jun  9 08:18:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0651870401_pi300-10000_cl_pass1_src1.csv
[Sat Jun  9 08:18:22 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0651870401_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0651870401_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  9 08:18:22 2012] fullrun_mos1_xmm0651870401_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat Jun  9 08:18:22 2012] fullrun_mos1_xmm0651870401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Jun  9 08:18:22 2012] Fit fullrun_mos1_xmm0651870401_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Jun  9 08:29:54 2012] Spatial fit model total counts = 672.207000, observed total counts = 670.000000
[Sat Jun  9 08:29:54 2012] Offset between fit and detection position for source 3 = 0.033452 pixels
[Sat Jun  9 08:29:54 2012] 670.082000 total counts/ 242.074000 bgd. counts: snr = 27.509191
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.033452 pixels
  Position = (192.7, 140.0) = 16 55 19.96 -37 3 11.6
  Extent = 6.4 (5.8-7.0)", rotation angle = 0
  Source counts = 428.0 +/- 25.9
  Background counts = 242.1
  Rate = 0.01 +/- 0.0009
[Sat Jun  9 08:29:54 2012] Vigneting correction estimate = 1.000000
[Sat Jun  9 08:29:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  9 08:29:54 2012] Assessing source extent using major axis lower bound
[Sat Jun  9 08:29:54 2012] Source does appear to be extended
[Sat Jun  9 08:29:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  9 08:46:57 2012] XMMSAS src. selection expression = ellipse(16715.965600, 12127.152000, 381.024011, 381.024011, 0.000000, X, Y)
[Sat Jun  9 08:46:57 2012] Writing source region out to fullrun_mos1_xmm0651870401_pi300-10000_pass1_cl_src3_src.reg
[Sat Jun  9 08:46:57 2012] Extracting stamp from image fullrun_mos1_xmm0651870401_pi300-10000_cl_sm2.00.img.gz, (171, 118) - (215, 162)
[Sat Jun  9 08:46:57 2012] XMMSAS bgd. selection expression = annulus(16715.965600, 12127.152000, 635.040018, 1270.080037, X, Y)
[Sat Jun  9 08:46:57 2012] Writing fullrun_mos1_xmm0651870401_pi300-10000_pass1_cl_src3.gif
[Sat Jun  9 08:46:59 2012] Mean detx,y = (10530.19, 10137.31) 
[Sat Jun  9 08:47:00 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jun  9 08:47:06 2012] Binned source spectrum to 10 counts/bin
[Sat Jun  9 08:47:06 2012] Setting source spectrum file to fullrun_mos1_xmm0651870401_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sat Jun  9 08:47:06 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0651870401_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Sat Jun  9 09:09:45 2012] Updating aperture counts using extracted products
[Sat Jun  9 09:09:45 2012] Error reading totcts from fullrun_mos1_xmm0651870401_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sat Jun  9 09:09:45 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jun  9 09:09:45 2012] Using photon index=1.80, rate=0.015, arf fullrun_mos1_xmm0651870401_pi300-10000_pass1_cl_src3.arf
[Sat Jun  9 09:09:45 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun  9 09:09:45 2012] Updating source flux to 4.3e-13
[Sat Jun  9 09:10:00 2012] Reading fit data from xmm0651870401/analysis//spectral/fullrun_mos1_xmm0651870401_pi300-10000_pass1_cl_src3_pl.csv
[Sat Jun  9 09:10:00 2012] Spectral fit parameter nH value = 5.34353e+21
[Sat Jun  9 09:10:00 2012] Spectral fit parameter PhoIndex value = 1.0367
[Sat Jun  9 09:10:00 2012] Failed to get F(0.3-8.0) from xmm0651870401/analysis//spectral/fullrun_mos1_xmm0651870401_pi300-10000_pass1_cl_src3_pl.csv, possibly due to different flux energy range selected
[Sat Jun  9 09:10:00 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jun  9 09:10:00 2012] Using Nh = 5.3e+21, photon index=1.04, rate=0.015, arf fullrun_mos1_xmm0651870401_pi300-10000_pass1_cl_src3.arf
[Sat Jun  9 09:10:00 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun  9 09:10:00 2012] Updating source flux to 7.8e-13