[Mon May 28 16:42:59 2012] Detection parameters:
  Position = (367.1, 316.3) = 15 14 31.87 42 5 47.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 106.9 +/- 13.1
  Background counts = 9.4
  Rate = 0.007 +/- 0.0009

[Mon May 28 16:43:00 2012] Off-axis axis estimate = 5.15'
[Mon May 28 17:22:43 2012] Using EEF radius (= 9.00 ")to estimate initial spatial extent for simple fitting
[Mon May 28 17:22:43 2012] Initial guess for spatial extent in simple fitting = 9.00"
[Mon May 28 17:22:43 2012] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.947
[Mon May 28 17:22:43 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 9.00"
[Mon May 28 17:36:47 2012] fullrun_mos2_xmm0651850501_pi300-10000_cl_pass0_src3.ximg exists
[Mon May 28 17:36:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0651850501_pi300-10000_cl_pass0_src3.csv
[Mon May 28 17:36:47 2012] fullrun_mos2_xmm0651850501_pi300-10000_cl_pass0_src3_1.ximg exists
[Mon May 28 17:36:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0651850501_pi300-10000_cl_pass0_src3.csv
[Mon May 28 17:36:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0651850501_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0651850501_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 28 17:36:47 2012] fullrun_mos2_xmm0651850501_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Mon May 28 17:36:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0651850501_pi300-10000_cl_pass0_tfrozen_src3.csv
[Mon May 28 17:36:47 2012] fullrun_mos2_xmm0651850501_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Mon May 28 17:36:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0651850501_pi300-10000_cl_pass0_tfrozen_src3.csv
[Mon May 28 17:36:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0651850501_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0651850501_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 28 17:36:57 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 15.011554 pixels away
[Mon May 28 17:36:57 2012] Vigneting correction estimate = 1.000000
[Mon May 28 17:36:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 28 17:36:57 2012] Assessing source extent using major
[Mon May 28 17:36:57 2012] Source does appear to be extended
[Mon May 28 17:36:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 28 18:14:55 2012] Using EEF radius (= 9.00 ")to estimate initial spatial extent for simple fitting
[Mon May 28 18:14:55 2012] Initial guess for spatial extent in simple fitting = 9.00"
[Mon May 28 18:14:55 2012] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.947
[Mon May 28 18:14:55 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 9.00"
[Mon May 28 18:31:07 2012] fullrun_mos2_xmm0651850501_pi300-10000_cl_pass1_src3.ximg exists
[Mon May 28 18:31:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0651850501_pi300-10000_cl_pass1_src3.csv
[Mon May 28 18:31:07 2012] fullrun_mos2_xmm0651850501_pi300-10000_cl_pass1_src3_1.ximg exists
[Mon May 28 18:31:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0651850501_pi300-10000_cl_pass1_src3.csv
[Mon May 28 18:31:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0651850501_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0651850501_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 28 18:31:07 2012] fullrun_mos2_xmm0651850501_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Mon May 28 18:31:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0651850501_pi300-10000_cl_pass1_tfrozen_src3.csv
[Mon May 28 18:31:07 2012] fullrun_mos2_xmm0651850501_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Mon May 28 18:31:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0651850501_pi300-10000_cl_pass1_tfrozen_src3.csv
[Mon May 28 18:31:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0651850501_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0651850501_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 28 18:31:17 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 15.995535 pixels away
[Mon May 28 18:31:17 2012] Warning: source 12 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 76.321522 pixels away
[Mon May 28 18:31:17 2012] Vigneting correction estimate = 1.000000
[Mon May 28 18:31:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 28 18:31:17 2012] Assessing source extent using major
[Mon May 28 18:31:17 2012] Source does appear to be extended
[Mon May 28 18:31:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 28 19:09:14 2012] XMMSAS src. selection expression = ellipse(31893.424683, 27468.016541, 652.500000, 652.500000, 0.000000, X, Y)
[Mon May 28 19:09:14 2012] Writing source region out to fullrun_mos2_xmm0651850501_pi300-10000_pass1_cl_src5_src.reg
[Mon May 28 19:09:14 2012] Extracting stamp from image fullrun_mos2_xmm0651850501_pi300-10000_cl_sm2.00.img.gz, (330, 279) - (405, 354)
[Mon May 28 19:09:14 2012] XMMSAS bgd. selection expression = annulus(31893.424683, 27468.016541, 1087.500000, 2175.000000, X, Y)
[Mon May 28 19:09:14 2012] Writing fullrun_mos2_xmm0651850501_pi300-10000_pass1_cl_src5.gif
[Mon May 28 19:10:09 2012] Mean detx,y = (7250.05, -2779.30) 
[Mon May 28 19:10:10 2012] Setting backscal keywords in source and bgd. spectrum
[Mon May 28 19:10:20 2012] Binned source spectrum to 10 counts/bin
[Mon May 28 19:10:20 2012] Setting source spectrum file to fullrun_mos2_xmm0651850501_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Mon May 28 19:10:20 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0651850501_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Mon May 28 19:19:02 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon May 28 19:19:02 2012] rmf not generated due to insufficient counts
[Mon May 28 19:20:21 2012] Updating aperture counts using extracted products
[Mon May 28 19:20:21 2012] Error reading totcts from fullrun_mos2_xmm0651850501_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Mon May 28 19:20:21 2012] Calculating source flux in energy range 0.30-8.00
[Mon May 28 19:20:21 2012] Using photon index=1.80, rate=0.00721, arf fullrun_mos2_xmm0651850501_pi300-10000_pass1_cl_src5.arf
[Mon May 28 19:20:21 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 28 19:20:21 2012] Updating source flux to 1.1e-13
[Mon May 28 19:20:47 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting