[Mon May 28 16:42:59 2012] Detection parameters:
  Position = (286.9, 277.8) = 15 15 3.22 42 3 0.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 3674.5 +/- 72.6
  Background counts = 12.2
  Rate = 0.2 +/- 0.003

[Mon May 28 16:43:00 2012] Off-axis axis estimate = 1.71'
[Mon May 28 17:22:43 2012] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Mon May 28 17:22:43 2012] Initial guess for spatial extent in simple fitting = 7.28"
[Mon May 28 17:22:43 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.846
[Mon May 28 17:22:43 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.28"
[Mon May 28 17:36:47 2012] fullrun_mos2_xmm0651850501_pi300-10000_cl_pass0_src1.ximg exists
[Mon May 28 17:36:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0651850501_pi300-10000_cl_pass0_src1.csv
[Mon May 28 17:36:47 2012] fullrun_mos2_xmm0651850501_pi300-10000_cl_pass0_src1_1.ximg exists
[Mon May 28 17:36:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0651850501_pi300-10000_cl_pass0_src1.csv
[Mon May 28 17:36:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0651850501_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0651850501_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 28 17:36:47 2012] fullrun_mos2_xmm0651850501_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Mon May 28 17:36:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0651850501_pi300-10000_cl_pass0_tfrozen_src1.csv
[Mon May 28 17:36:47 2012] fullrun_mos2_xmm0651850501_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Mon May 28 17:36:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0651850501_pi300-10000_cl_pass0_tfrozen_src1.csv
[Mon May 28 17:36:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0651850501_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0651850501_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 28 17:36:57 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 10.393692 pixels away
[Mon May 28 17:36:57 2012] Vigneting correction estimate = 1.000000
[Mon May 28 17:36:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 28 17:36:57 2012] Assessing source extent using major
[Mon May 28 17:36:57 2012] Source does appear to be extended
[Mon May 28 17:36:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 28 18:14:55 2012] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Mon May 28 18:14:55 2012] Initial guess for spatial extent in simple fitting = 7.28"
[Mon May 28 18:14:55 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.846
[Mon May 28 18:14:55 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 7.28"
[Mon May 28 18:31:07 2012] fullrun_mos2_xmm0651850501_pi300-10000_cl_pass1_src1.ximg exists
[Mon May 28 18:31:07 2012] fullrun_mos2_xmm0651850501_pi300-10000_cl_pass1_src1_1.ximg exists
[Mon May 28 18:31:07 2012] Fit fullrun_mos2_xmm0651850501_pi300-10000_cl_pass1_src1 appears to have run properly
[Mon May 28 18:31:07 2012] fullrun_mos2_xmm0651850501_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Mon May 28 18:31:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0651850501_pi300-10000_cl_pass1_tfrozen_src1.csv
[Mon May 28 18:31:07 2012] fullrun_mos2_xmm0651850501_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Mon May 28 18:31:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0651850501_pi300-10000_cl_pass1_tfrozen_src1.csv
[Mon May 28 18:31:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0651850501_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0651850501_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 28 18:31:17 2012] Spatial fit model total counts = 3522.710000, observed total counts = 3301.000000
[Mon May 28 18:31:17 2012] Offset between fit and detection position for source 3 = 0.143553 pixels
[Mon May 28 18:31:17 2012] 3488.090000 total counts/ 1064.330000 bgd. counts: snr = 74.293610
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.143553 pixels
  Position = (287.0, 277.7) = 15 15 3.20 42 2 59.9
  Extent = 5.2 (5.0-5.4)" x 4.8 (4.6-5.1)", rotation angle = 4 (332-30) degrees
  Source counts = 2423.8 +/- 59.1
  Background counts = 1064.3
  Rate = 0.1 +/- 0.003
[Mon May 28 18:31:17 2012] Vigneting correction estimate = 1.000000
[Mon May 28 18:31:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 28 18:31:17 2012] Assessing source extent using major axis lower bound
[Mon May 28 18:31:17 2012] Source does appear to be extended
[Mon May 28 18:31:17 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.98
[Mon May 28 19:09:14 2012] Counts = 2423.760000, rescaling region sizes by 2.000000
[Mon May 28 19:09:14 2012] XMMSAS src. selection expression = ellipse(24920.220432, 24109.382800, 621.436818, 581.386817, 4.453747, X, Y)
[Mon May 28 19:09:14 2012] Writing source region out to fullrun_mos2_xmm0651850501_pi300-10000_pass1_cl_src3_src.reg
[Mon May 28 19:09:14 2012] Extracting stamp from image fullrun_mos2_xmm0651850501_pi300-10000_cl_sm2.00.img.gz, (251, 242) - (323, 313)
[Mon May 28 19:09:14 2012] XMMSAS bgd. selection expression = annulus(24920.220432, 24109.382800, 2071.456060, 4142.912119, X, Y) && !ellipse(23810.461456, 26712.084564, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May 28 19:09:14 2012] Writing fullrun_mos2_xmm0651850501_pi300-10000_pass1_cl_src3.gif
[Mon May 28 19:09:16 2012] Mean detx,y = (71.92, 103.52) 
[Mon May 28 19:09:16 2012] Setting backscal keywords in source and bgd. spectrum
[Mon May 28 19:09:48 2012] Binned source spectrum to 10 counts/bin
[Mon May 28 19:09:48 2012] Setting source spectrum file to fullrun_mos2_xmm0651850501_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Mon May 28 19:09:48 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0651850501_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Mon May 28 19:20:21 2012] Updating aperture counts using extracted products
[Mon May 28 19:20:21 2012] Error reading totcts from fullrun_mos2_xmm0651850501_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Mon May 28 19:20:21 2012] Calculating source flux in energy range 0.30-8.00
[Mon May 28 19:20:21 2012] Using photon index=1.80, rate=0.108, arf fullrun_mos2_xmm0651850501_pi300-10000_pass1_cl_src3.arf
[Mon May 28 19:20:21 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 28 19:20:21 2012] Updating source flux to 1.2e-12
[Mon May 28 19:21:12 2012] Reading fit data from xmm0651850501/analysis//spectral/fullrun_mos2_xmm0651850501_pi300-10000_pass1_cl_src3_pl.csv
[Mon May 28 19:21:12 2012] Spectral fit parameter nH value = 9.42178e+22
[Mon May 28 19:21:12 2012] Spectral fit parameter PhoIndex value = 1.51887
[Mon May 28 19:21:12 2012] Failed to get F(0.3-8.0) from xmm0651850501/analysis//spectral/fullrun_mos2_xmm0651850501_pi300-10000_pass1_cl_src3_pl.csv, possibly due to different flux energy range selected
[Mon May 28 19:21:12 2012] Calculating source flux in energy range 0.30-8.00
[Mon May 28 19:21:12 2012] Using Nh = 9.4e+22, photon index=1.52, rate=0.108, arf fullrun_mos2_xmm0651850501_pi300-10000_pass1_cl_src3.arf
[Mon May 28 19:21:12 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 28 19:21:12 2012] Updating source flux to 3.8e-12