[Sat Mar 31 10:47:04 2012] Detection parameters:
  Position = (321.7, 176.8) = 12 23 7.66 11 10 20.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 699.5 +/- 33.3
  Background counts = 60.5
  Rate = 0.02 +/- 0.001

[Sat Mar 31 10:47:05 2012] Off-axis axis estimate = 8.98'
[Sat Mar 31 10:51:35 2012] Using EEF radius (= 10.92 ")to estimate initial spatial extent for simple fitting
[Sat Mar 31 10:51:35 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Mar 31 10:51:35 2012] Initial guess for spatial extent in simple fitting = 10.92"
[Sat Mar 31 10:51:35 2012] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.994
[Sat Mar 31 10:51:35 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 10.92"
[Sat Mar 31 11:42:40 2012] fullrun_pn_xmm0651790301_pi300-10000_cl_pass0_src1.ximg exists
[Sat Mar 31 11:42:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0651790301_pi300-10000_cl_pass0_src1.csv
[Sat Mar 31 11:42:40 2012] fullrun_pn_xmm0651790301_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat Mar 31 11:42:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0651790301_pi300-10000_cl_pass0_src1.csv
[Sat Mar 31 11:42:40 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0651790301_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0651790301_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar 31 11:42:41 2012] fullrun_pn_xmm0651790301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat Mar 31 11:42:41 2012] fullrun_pn_xmm0651790301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Mar 31 11:42:41 2012] Fit fullrun_pn_xmm0651790301_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Mar 31 12:26:31 2012] Spatial fit model total counts = 1182.430000, observed total counts = 1096.000000
[Sat Mar 31 12:26:31 2012] Offset between fit and detection position for source 1 = 0.116704 pixels
[Sat Mar 31 12:26:31 2012] 1191.976000 total counts/ 758.494000 bgd. counts: snr = 15.739647
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.116704 pixels
  Position = (321.5, 176.8) = 12 23 7.70 11 10 20.7
  Extent = 5.9 (5.3-6.4)", rotation angle = 0
  Source counts = 433.5 +/- 34.5
  Background counts = 758.5
  Rate = 0.02 +/- 0.002
[Sat Mar 31 12:26:31 2012] Vigneting correction estimate = 1.000000
[Sat Mar 31 12:26:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Mar 31 12:26:31 2012] Assessing source extent using major axis lower bound
[Sat Mar 31 12:26:31 2012] Source does appear to be extended
[Sat Mar 31 12:26:31 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar 31 12:26:50 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Mar 31 12:26:50 2012] Initial guess for spatial extent in simple fitting = 5.93"
[Sat Mar 31 12:26:50 2012] source mask rpix=1.4, npix_max = 13, mask sum = 12, frac = 0.865
[Sat Mar 31 12:26:50 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.93"
[Sat Mar 31 13:24:43 2012] fullrun_pn_xmm0651790301_pi300-10000_cl_pass1_src1.ximg exists
[Sat Mar 31 13:24:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0651790301_pi300-10000_cl_pass1_src1.csv
[Sat Mar 31 13:24:43 2012] fullrun_pn_xmm0651790301_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat Mar 31 13:24:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0651790301_pi300-10000_cl_pass1_src1.csv
[Sat Mar 31 13:24:43 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0651790301_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0651790301_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar 31 13:24:44 2012] fullrun_pn_xmm0651790301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat Mar 31 13:24:44 2012] fullrun_pn_xmm0651790301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Mar 31 13:24:44 2012] Fit fullrun_pn_xmm0651790301_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Mar 31 14:09:12 2012] Spatial fit model total counts = 970.615000, observed total counts = 904.000000
[Sat Mar 31 14:09:12 2012] Offset between fit and detection position for source 1 = 0.021880 pixels
[Sat Mar 31 14:09:12 2012] 974.326000 total counts/ 552.006000 bgd. counts: snr = 17.975035
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.021880 pixels
  Position = (321.6, 176.8) = 12 23 7.69 11 10 20.7
  Extent = 5.7 (5.2-6.3)", rotation angle = 0
  Source counts = 422.3 +/- 31.2
  Background counts = 552.0
  Rate = 0.02 +/- 0.002
[Sat Mar 31 14:09:12 2012] Vigneting correction estimate = 1.000000
[Sat Mar 31 14:09:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Mar 31 14:09:12 2012] Assessing source extent using major axis lower bound
[Sat Mar 31 14:09:12 2012] Source does appear to be extended
[Sat Mar 31 14:09:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar 31 14:09:30 2012] XMMSAS src. selection expression = ellipse(27927.492200, 15333.121000, 340.927210, 340.927210, 0.000000, X, Y)
[Sat Mar 31 14:09:30 2012] Writing source region out to fullrun_pn_xmm0651790301_pi300-10000_pass1_cl_src1_src.reg
[Sat Mar 31 14:09:30 2012] Extracting stamp from image fullrun_pn_xmm0651790301_pi300-10000_cl_sm2.00.img.gz, (302, 157) - (341, 196)
[Sat Mar 31 14:09:30 2012] XMMSAS bgd. selection expression = annulus(27927.492200, 15333.121000, 568.212016, 1136.424033, X, Y)
[Sat Mar 31 14:09:30 2012] Writing fullrun_pn_xmm0651790301_pi300-10000_pass1_cl_src1.gif
[Sat Mar 31 14:09:47 2012] Mean detx,y = (-4361.62, 11723.81) 
[Sat Mar 31 14:09:52 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Mar 31 14:10:18 2012] Binned source spectrum to 10 counts/bin
[Sat Mar 31 14:10:19 2012] Setting source spectrum file to fullrun_pn_xmm0651790301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Mar 31 14:10:19 2012] Setting bgd. spectrum file to fullrun_pn_xmm0651790301_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sat Mar 31 15:35:50 2012] Updating aperture counts using extracted products
[Sat Mar 31 15:35:50 2012] Error reading totcts from fullrun_pn_xmm0651790301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Mar 31 15:35:52 2012] Calculating source flux in energy range 0.30-8.00
[Sat Mar 31 15:35:52 2012] Using photon index=1.80, rate=0.0203, arf fullrun_pn_xmm0651790301_pi300-10000_pass1_cl_src1.arf
[Sat Mar 31 15:35:52 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Mar 31 15:35:52 2012] Updating source flux to 1.4e-13
[Sat Mar 31 15:38:41 2012] Reading fit data from xmm0651790301/analysis//spectral/fullrun_pn_xmm0651790301_pi300-10000_pass1_cl_src1_pl.csv
[Sat Mar 31 15:38:41 2012] Spectral fit parameter nH value = 5.13374e+20
[Sat Mar 31 15:38:41 2012] Spectral fit parameter PhoIndex value = 1.84302
[Sat Mar 31 15:38:41 2012] Failed to get F(0.3-8.0) from xmm0651790301/analysis//spectral/fullrun_pn_xmm0651790301_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sat Mar 31 15:38:41 2012] Calculating source flux in energy range 0.30-8.00
[Sat Mar 31 15:38:41 2012] Using Nh = 5.1e+20, photon index=1.84, rate=0.0203, arf fullrun_pn_xmm0651790301_pi300-10000_pass1_cl_src1.arf
[Sat Mar 31 15:38:41 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Mar 31 15:38:41 2012] Updating source flux to 1.6e-13