[Fri Jul  6 05:48:46 2012] Detection parameters:
  Position = (324.2, 218.7) = 12 16 31.64 -12 7 32.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 112.5 +/- 14.5
  Background counts = 36.9
  Rate = 0.002 +/- 0.0003

[Fri Jul  6 05:48:46 2012] Off-axis axis estimate = 6.08'
[Fri Jul  6 07:35:54 2012] Using EEF radius (= 9.47 ")to estimate initial spatial extent for simple fitting
[Fri Jul  6 07:35:54 2012] Initial guess for spatial extent in simple fitting = 9.47"
[Fri Jul  6 07:35:54 2012] source mask rpix=2.2, npix_max = 28, mask sum = 20, frac = 0.698
[Fri Jul  6 07:35:54 2012] Giving source the simple spatial ID 13 for pass 0, mean size = 9.47"
[Fri Jul  6 08:25:46 2012] fullrun_mos2_xmm0651770201_pi300-10000_cl_pass0_src13.ximg exists
[Fri Jul  6 08:25:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0651770201_pi300-10000_cl_pass0_src13.csv
[Fri Jul  6 08:25:46 2012] fullrun_mos2_xmm0651770201_pi300-10000_cl_pass0_src13_1.ximg exists
[Fri Jul  6 08:25:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0651770201_pi300-10000_cl_pass0_src13.csv
[Fri Jul  6 08:25:46 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0651770201_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0651770201_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul  6 08:25:47 2012] fullrun_mos2_xmm0651770201_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Fri Jul  6 08:25:47 2012] fullrun_mos2_xmm0651770201_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Fri Jul  6 08:25:47 2012] Fit fullrun_mos2_xmm0651770201_pi300-10000_cl_pass0_tfrozen_src13 appears to have run properly
[Fri Jul  6 08:26:08 2012] Warning: source 13 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 19 at 13.194395 pixels away
[Fri Jul  6 08:26:08 2012] Vigneting correction estimate = 1.000000
[Fri Jul  6 08:26:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul  6 08:26:08 2012] Assessing source extent using major
[Fri Jul  6 08:26:08 2012] Source does appear to be extended
[Fri Jul  6 08:26:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul  6 10:07:23 2012] Using EEF radius (= 9.47 ")to estimate initial spatial extent for simple fitting
[Fri Jul  6 10:07:23 2012] Initial guess for spatial extent in simple fitting = 9.47"
[Fri Jul  6 10:07:23 2012] source mask rpix=2.2, npix_max = 28, mask sum = 20, frac = 0.698
[Fri Jul  6 10:07:23 2012] Giving source the simple spatial ID 13 for pass 1, mean size = 9.47"
[Fri Jul  6 11:00:18 2012] fullrun_mos2_xmm0651770201_pi300-10000_cl_pass1_src13.ximg exists
[Fri Jul  6 11:00:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0651770201_pi300-10000_cl_pass1_src13.csv
[Fri Jul  6 11:00:18 2012] fullrun_mos2_xmm0651770201_pi300-10000_cl_pass1_src13_1.ximg exists
[Fri Jul  6 11:00:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0651770201_pi300-10000_cl_pass1_src13.csv
[Fri Jul  6 11:00:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0651770201_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0651770201_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul  6 11:00:19 2012] fullrun_mos2_xmm0651770201_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Fri Jul  6 11:00:19 2012] fullrun_mos2_xmm0651770201_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Fri Jul  6 11:00:19 2012] Fit fullrun_mos2_xmm0651770201_pi300-10000_cl_pass1_tfrozen_src13 appears to have run properly
[Fri Jul  6 11:00:44 2012] Spatial fit model total counts = 470.037000, observed total counts = 464.000000
[Fri Jul  6 11:00:44 2012] Offset between fit and detection position for source 19 = 0.441886 pixels
[Fri Jul  6 11:00:44 2012] 478.826500 total counts/ 433.737000 bgd. counts: snr = 2.165021
Spatial fit parameters:
  Offset between fit and detection position for source 19 = 0.441886 pixels
  Position = (323.8, 218.4) = 12 16 31.75 -12 7 34.4
  Extent = 3.6 (2.4-5.1)", rotation angle = 0
  Source counts = 45.1 +/- 21.9
  Background counts = 433.7
  Rate = 0.0006 +/- 0.0003
[Fri Jul  6 11:00:44 2012] Vigneting correction estimate = 1.000000
[Fri Jul  6 11:00:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul  6 11:00:44 2012] Assessing source extent using major axis lower bound
[Fri Jul  6 11:00:44 2012] Source does appear to be extended
[Fri Jul  6 11:00:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul  6 14:24:11 2012] XMMSAS src. selection expression = ellipse(28120.105100, 18954.785800, 213.630653, 213.630653, 0.000000, X, Y)
[Fri Jul  6 14:24:11 2012] Writing source region out to fullrun_mos2_xmm0651770201_pi300-10000_pass1_cl_src19_src.reg
[Fri Jul  6 14:24:11 2012] Extracting stamp from image fullrun_mos2_xmm0651770201_pi300-10000_cl_sm2.00.img.gz, (311, 206) - (336, 231)
[Fri Jul  6 14:24:11 2012] XMMSAS bgd. selection expression = annulus(28120.105100, 18954.785800, 356.051089, 712.102178, X, Y)
[Fri Jul  6 14:24:11 2012] Writing fullrun_mos2_xmm0651770201_pi300-10000_pass1_cl_src19.gif
[Fri Jul  6 14:27:47 2012] Mean detx,y = (578.05, 5643.16) 
[Fri Jul  6 14:27:48 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jul  6 14:27:55 2012] Binned source spectrum to 10 counts/bin
[Fri Jul  6 14:27:55 2012] Setting source spectrum file to fullrun_mos2_xmm0651770201_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Fri Jul  6 14:27:55 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0651770201_pi300-10000_pass1_cl_src19_bgd.pi.gz
[Fri Jul  6 15:03:03 2012] Not generating rmf since there are only 45 counts
[Fri Jul  6 15:03:03 2012] rmf not generated due to insufficient counts
[Fri Jul  6 15:07:41 2012] Updating aperture counts using extracted products
[Fri Jul  6 15:07:41 2012] Error reading totcts from fullrun_mos2_xmm0651770201_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Fri Jul  6 15:07:42 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul  6 15:07:42 2012] Using photon index=1.80, rate=0.000609, arf fullrun_mos2_xmm0651770201_pi300-10000_pass1_cl_src19.arf
[Fri Jul  6 15:07:42 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul  6 15:07:42 2012] Updating source flux to 1.4e-14
[Fri Jul  6 15:09:54 2012] Source 19 has fewer than 100.000000 counts, skipping spectral fitting