[Fri Jul  6 05:48:46 2012] Detection parameters:
  Position = (332.1, 262.1) = 12 16 29.27 -12 4 24.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1736.2 +/- 50.8
  Background counts = 38.6
  Rate = 0.03 +/- 0.0008

[Fri Jul  6 05:48:46 2012] Off-axis axis estimate = 3.59'
[Fri Jul  6 07:35:54 2012] Using EEF radius (= 8.23 ")to estimate initial spatial extent for simple fitting
[Fri Jul  6 07:35:54 2012] Initial guess for spatial extent in simple fitting = 8.23"
[Fri Jul  6 07:35:54 2012] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.875
[Fri Jul  6 07:35:54 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 8.23"
[Fri Jul  6 08:25:46 2012] fullrun_mos2_xmm0651770201_pi300-10000_cl_pass0_src1.ximg exists
[Fri Jul  6 08:25:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0651770201_pi300-10000_cl_pass0_src1.csv
[Fri Jul  6 08:25:46 2012] fullrun_mos2_xmm0651770201_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Jul  6 08:25:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0651770201_pi300-10000_cl_pass0_src1.csv
[Fri Jul  6 08:25:46 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0651770201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0651770201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul  6 08:25:47 2012] fullrun_mos2_xmm0651770201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Jul  6 08:25:47 2012] fullrun_mos2_xmm0651770201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Jul  6 08:25:47 2012] Fit fullrun_mos2_xmm0651770201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Jul  6 08:26:08 2012] Spatial fit model total counts = 1858.260000, observed total counts = 1859.000000
[Fri Jul  6 08:26:08 2012] Offset between fit and detection position for source 1 = 0.055015 pixels
[Fri Jul  6 08:26:08 2012] 1855.418000 total counts/ 686.858000 bgd. counts: snr = 44.587953
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.055015 pixels
  Position = (332.2, 262.1) = 12 16 29.27 -12 4 24.3
  Extent = 4.9 (4.6-5.1)", rotation angle = 0
  Source counts = 1168.6 +/- 43.1
  Background counts = 686.9
  Rate = 0.02 +/- 0.0006
[Fri Jul  6 08:26:08 2012] Vigneting correction estimate = 1.000000
[Fri Jul  6 08:26:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul  6 08:26:08 2012] Assessing source extent using major axis lower bound
[Fri Jul  6 08:26:08 2012] Source does appear to be extended
[Fri Jul  6 08:26:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul  6 10:07:23 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jul  6 10:07:23 2012] Initial guess for spatial extent in simple fitting = 4.89"
[Fri Jul  6 10:07:23 2012] source mask rpix=1.1, npix_max = 10, mask sum = 9, frac = 0.853
[Fri Jul  6 10:07:23 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 4.89"
[Fri Jul  6 11:00:18 2012] fullrun_mos2_xmm0651770201_pi300-10000_cl_pass1_src1.ximg exists
[Fri Jul  6 11:00:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0651770201_pi300-10000_cl_pass1_src1.csv
[Fri Jul  6 11:00:18 2012] fullrun_mos2_xmm0651770201_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Jul  6 11:00:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0651770201_pi300-10000_cl_pass1_src1.csv
[Fri Jul  6 11:00:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0651770201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0651770201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul  6 11:00:19 2012] fullrun_mos2_xmm0651770201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Jul  6 11:00:19 2012] fullrun_mos2_xmm0651770201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Jul  6 11:00:19 2012] Fit fullrun_mos2_xmm0651770201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Jul  6 11:00:44 2012] Spatial fit model total counts = 1858.270000, observed total counts = 1859.000000
[Fri Jul  6 11:00:44 2012] Offset between fit and detection position for source 1 = 0.000143 pixels
[Fri Jul  6 11:00:44 2012] 1855.421000 total counts/ 687.251000 bgd. counts: snr = 44.560326
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.000143 pixels
  Position = (332.2, 262.1) = 12 16 29.27 -12 4 24.3
  Extent = 4.9 (4.6-5.1)", rotation angle = 0
  Source counts = 1168.2 +/- 43.1
  Background counts = 687.3
  Rate = 0.02 +/- 0.0006
[Fri Jul  6 11:00:44 2012] Vigneting correction estimate = 1.000000
[Fri Jul  6 11:00:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul  6 11:00:44 2012] Assessing source extent using major axis lower bound
[Fri Jul  6 11:00:44 2012] Source does appear to be extended
[Fri Jul  6 11:00:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul  6 14:24:11 2012] Counts = 1168.170000, rescaling region sizes by 2.000000
[Fri Jul  6 14:24:11 2012] XMMSAS src. selection expression = ellipse(28849.542300, 22757.871400, 586.189217, 586.189217, 0.000000, X, Y)
[Fri Jul  6 14:24:11 2012] Writing source region out to fullrun_mos2_xmm0651770201_pi300-10000_pass1_cl_src1_src.reg
[Fri Jul  6 14:24:11 2012] Extracting stamp from image fullrun_mos2_xmm0651770201_pi300-10000_cl_sm2.00.img.gz, (298, 228) - (366, 296)
[Fri Jul  6 14:24:11 2012] XMMSAS bgd. selection expression = annulus(28849.542300, 22757.871400, 1953.964056, 3907.928112, X, Y) && !ellipse(33293.028687, 26559.178772, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24894.254400, 26690.313600, 357.355210, 357.355210, 0.000000, X, Y) && !ellipse(24140.937400, 26491.972000, 810.240023, 810.240023, 0.000000, X, Y) && !ellipse(26482.135132, 26562.895813, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28120.105100, 18954.785800, 284.840871, 284.840871, 0.000000, X, Y) && !ellipse(25573.000000, 22774.280518, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25365.854614, 23133.906891, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jul  6 14:24:11 2012] Writing fullrun_mos2_xmm0651770201_pi300-10000_pass1_cl_src1.gif
[Fri Jul  6 14:24:16 2012] Mean detx,y = (2701.17, 2402.76) 
[Fri Jul  6 14:24:17 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jul  6 14:24:33 2012] Binned source spectrum to 10 counts/bin
[Fri Jul  6 14:24:33 2012] Setting source spectrum file to fullrun_mos2_xmm0651770201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Jul  6 14:24:33 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0651770201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri Jul  6 15:07:41 2012] Updating aperture counts using extracted products
[Fri Jul  6 15:07:41 2012] Error reading totcts from fullrun_mos2_xmm0651770201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Jul  6 15:07:42 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul  6 15:07:42 2012] Using photon index=1.80, rate=0.0158, arf fullrun_mos2_xmm0651770201_pi300-10000_pass1_cl_src1.arf
[Fri Jul  6 15:07:42 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul  6 15:07:42 2012] Updating source flux to 2e-13
[Fri Jul  6 15:10:40 2012] Reading fit data from xmm0651770201/analysis//spectral/fullrun_mos2_xmm0651770201_pi300-10000_pass1_cl_src1_pl.csv
[Fri Jul  6 15:10:40 2012] Spectral fit parameter nH value = 1.19551e+20
[Fri Jul  6 15:10:40 2012] Spectral fit parameter PhoIndex value = 2.17396
[Fri Jul  6 15:10:40 2012] Failed to get F(0.3-8.0) from xmm0651770201/analysis//spectral/fullrun_mos2_xmm0651770201_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Fri Jul  6 15:10:40 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul  6 15:10:40 2012] Using Nh = 1.2e+20, photon index=2.17, rate=0.0158, arf fullrun_mos2_xmm0651770201_pi300-10000_pass1_cl_src1.arf
[Fri Jul  6 15:10:40 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul  6 15:10:40 2012] Updating source flux to 1.8e-13