[Fri Jul  6 05:48:18 2012] Detection parameters:
  Position = (383.1, 305.8) = 12 16 14.16 -12 1 15.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 745.8 +/- 34.3
  Background counts = 34.0
  Rate = 0.02 +/- 0.0008

[Fri Jul  6 05:48:18 2012] Off-axis axis estimate = 6.16'
[Fri Jul  6 06:56:18 2012] Using EEF radius (= 9.51 ")to estimate initial spatial extent for simple fitting
[Fri Jul  6 06:56:18 2012] Initial guess for spatial extent in simple fitting = 9.51"
[Fri Jul  6 06:56:18 2012] source mask rpix=2.2, npix_max = 28, mask sum = 30, frac = 1.040
[Fri Jul  6 06:56:18 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 9.51"
[Fri Jul  6 07:35:53 2012] fullrun_mos1_xmm0651770201_pi300-10000_cl_pass0_src3.ximg exists
[Fri Jul  6 07:35:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0651770201_pi300-10000_cl_pass0_src3.csv
[Fri Jul  6 07:35:53 2012] fullrun_mos1_xmm0651770201_pi300-10000_cl_pass0_src3_1.ximg exists
[Fri Jul  6 07:35:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0651770201_pi300-10000_cl_pass0_src3.csv
[Fri Jul  6 07:35:53 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0651770201_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0651770201_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul  6 07:35:54 2012] fullrun_mos1_xmm0651770201_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Fri Jul  6 07:35:54 2012] fullrun_mos1_xmm0651770201_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Fri Jul  6 07:35:54 2012] Fit fullrun_mos1_xmm0651770201_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Fri Jul  6 08:26:04 2012] Spatial fit model total counts = 1008.180000, observed total counts = 987.000000
[Fri Jul  6 08:26:04 2012] Offset between fit and detection position for source 3 = 0.289102 pixels
[Fri Jul  6 08:26:04 2012] 1004.656000 total counts/ 443.639000 bgd. counts: snr = 26.635519
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.289102 pixels
  Position = (382.9, 305.5) = 12 16 14.22 -12 1 15.4
  Extent = 6.2 (5.8-6.8)", rotation angle = 0
  Source counts = 561.0 +/- 31.7
  Background counts = 443.6
  Rate = 0.008 +/- 0.0004
[Fri Jul  6 08:26:04 2012] Vigneting correction estimate = 1.000000
[Fri Jul  6 08:26:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul  6 08:26:04 2012] Assessing source extent using major axis lower bound
[Fri Jul  6 08:26:04 2012] Source does appear to be extended
[Fri Jul  6 08:26:04 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul  6 09:26:41 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jul  6 09:26:41 2012] Initial guess for spatial extent in simple fitting = 6.24"
[Fri Jul  6 09:26:41 2012] source mask rpix=1.4, npix_max = 14, mask sum = 12, frac = 0.803
[Fri Jul  6 09:26:41 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 6.24"
[Fri Jul  6 10:07:22 2012] fullrun_mos1_xmm0651770201_pi300-10000_cl_pass1_src3.ximg exists
[Fri Jul  6 10:07:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0651770201_pi300-10000_cl_pass1_src3.csv
[Fri Jul  6 10:07:22 2012] fullrun_mos1_xmm0651770201_pi300-10000_cl_pass1_src3_1.ximg exists
[Fri Jul  6 10:07:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0651770201_pi300-10000_cl_pass1_src3.csv
[Fri Jul  6 10:07:22 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0651770201_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0651770201_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul  6 10:07:22 2012] fullrun_mos1_xmm0651770201_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Fri Jul  6 10:07:22 2012] fullrun_mos1_xmm0651770201_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Fri Jul  6 10:07:22 2012] Fit fullrun_mos1_xmm0651770201_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Fri Jul  6 11:00:38 2012] Spatial fit model total counts = 1007.140000, observed total counts = 992.000000
[Fri Jul  6 11:00:38 2012] Offset between fit and detection position for source 3 = 0.007371 pixels
[Fri Jul  6 11:00:38 2012] 1005.767000 total counts/ 443.328000 bgd. counts: snr = 26.712396
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.007371 pixels
  Position = (382.9, 305.5) = 12 16 14.22 -12 1 15.5
  Extent = 6.3 (5.8-6.8)", rotation angle = 0
  Source counts = 562.4 +/- 31.7
  Background counts = 443.3
  Rate = 0.008 +/- 0.0004
[Fri Jul  6 11:00:38 2012] Vigneting correction estimate = 1.000000
[Fri Jul  6 11:00:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul  6 11:00:38 2012] Assessing source extent using major axis lower bound
[Fri Jul  6 11:00:38 2012] Source does appear to be extended
[Fri Jul  6 11:00:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul  6 13:13:12 2012] XMMSAS src. selection expression = ellipse(33264.540480, 26532.861600, 375.724811, 375.724811, 0.000000, X, Y)
[Fri Jul  6 13:13:12 2012] Writing source region out to fullrun_mos1_xmm0651770201_pi300-10000_pass1_cl_src3_src.reg
[Fri Jul  6 13:13:12 2012] Extracting stamp from image fullrun_mos1_xmm0651770201_pi300-10000_cl_sm2.00.img.gz, (361, 284) - (405, 327)
[Fri Jul  6 13:13:12 2012] XMMSAS bgd. selection expression = annulus(33264.540480, 26532.861600, 626.208018, 1252.416036, X, Y)
[Fri Jul  6 13:13:12 2012] Writing fullrun_mos1_xmm0651770201_pi300-10000_pass1_cl_src3.gif
[Fri Jul  6 13:16:01 2012] Mean detx,y = (856.31, -8384.96) 
[Fri Jul  6 13:16:02 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jul  6 13:16:17 2012] Binned source spectrum to 10 counts/bin
[Fri Jul  6 13:16:17 2012] Setting source spectrum file to fullrun_mos1_xmm0651770201_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Fri Jul  6 13:16:17 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0651770201_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Fri Jul  6 15:07:40 2012] Updating aperture counts using extracted products
[Fri Jul  6 15:07:40 2012] Error reading totcts from fullrun_mos1_xmm0651770201_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Fri Jul  6 15:07:41 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul  6 15:07:41 2012] Using photon index=1.80, rate=0.00758, arf fullrun_mos1_xmm0651770201_pi300-10000_pass1_cl_src3.arf
[Fri Jul  6 15:07:41 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul  6 15:07:41 2012] Updating source flux to 1.5e-13