[Fri Jul  6 05:48:18 2012] Detection parameters:
  Position = (348.7, 361.0) = 12 16 24.36 -11 57 14.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 91.7 +/- 14.2
  Background counts = 32.9
  Rate = 0.002 +/- 0.0003

[Fri Jul  6 05:48:18 2012] Off-axis axis estimate = 5.82'
[Fri Jul  6 06:56:18 2012] Using EEF radius (= 9.34 ")to estimate initial spatial extent for simple fitting
[Fri Jul  6 06:56:18 2012] Initial guess for spatial extent in simple fitting = 9.34"
[Fri Jul  6 06:56:18 2012] source mask rpix=2.1, npix_max = 28, mask sum = 30, frac = 1.071
[Fri Jul  6 06:56:18 2012] Giving source the simple spatial ID 14 for pass 0, mean size = 9.34"
[Fri Jul  6 07:35:53 2012] fullrun_mos1_xmm0651770201_pi300-10000_cl_pass0_src14.ximg exists
[Fri Jul  6 07:35:53 2012] fullrun_mos1_xmm0651770201_pi300-10000_cl_pass0_src14_1.ximg exists
[Fri Jul  6 07:35:53 2012] Fit fullrun_mos1_xmm0651770201_pi300-10000_cl_pass0_src14 appears to have run properly
[Fri Jul  6 07:35:54 2012] fullrun_mos1_xmm0651770201_pi300-10000_cl_pass0_tfrozen_src14.ximg exists
[Fri Jul  6 07:35:54 2012] fullrun_mos1_xmm0651770201_pi300-10000_cl_pass0_tfrozen_src14_1.ximg exists
[Fri Jul  6 07:35:54 2012] Fit fullrun_mos1_xmm0651770201_pi300-10000_cl_pass0_tfrozen_src14 appears to have run properly
[Fri Jul  6 08:26:04 2012] Spatial fit model total counts = 466.592000, observed total counts = 438.000000
[Fri Jul  6 08:26:04 2012] Offset between fit and detection position for source 21 = 0.118034 pixels
[Fri Jul  6 08:26:04 2012] 455.038000 total counts/ 407.594000 bgd. counts: snr = 2.349998
Spatial fit parameters:
  Offset between fit and detection position for source 21 = 0.118034 pixels
  Position = (348.6, 361.0) = 12 16 24.40 -11 57 14.3
  Extent = 4.3 (2.8-6.2)", rotation angle = 0
  Source counts = 47.4 +/- 21.3
  Background counts = 407.6
  Rate = 0.0006 +/- 0.0003
[Fri Jul  6 08:26:04 2012] Vigneting correction estimate = 1.000000
[Fri Jul  6 08:26:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul  6 08:26:04 2012] Assessing source extent using major axis lower bound
[Fri Jul  6 08:26:04 2012] Source does appear to be extended
[Fri Jul  6 08:26:04 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul  6 09:26:41 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jul  6 09:26:41 2012] Initial guess for spatial extent in simple fitting = 4.28"
[Fri Jul  6 09:26:41 2012] source mask rpix=1.0, npix_max = 8, mask sum = 6, frac = 0.682
[Fri Jul  6 09:26:41 2012] Giving source the simple spatial ID 14 for pass 1, mean size = 4.28"
[Fri Jul  6 10:07:22 2012] fullrun_mos1_xmm0651770201_pi300-10000_cl_pass1_src14.ximg exists
[Fri Jul  6 10:07:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0651770201_pi300-10000_cl_pass1_src14.csv
[Fri Jul  6 10:07:22 2012] fullrun_mos1_xmm0651770201_pi300-10000_cl_pass1_src14_1.ximg exists
[Fri Jul  6 10:07:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0651770201_pi300-10000_cl_pass1_src14.csv
[Fri Jul  6 10:07:22 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0651770201_pi300-10000_cl_pass1_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0651770201_pi300-10000_cl_pass1_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul  6 10:07:23 2012] fullrun_mos1_xmm0651770201_pi300-10000_cl_pass1_tfrozen_src14.ximg exists
[Fri Jul  6 10:07:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0651770201_pi300-10000_cl_pass1_tfrozen_src14.csv
[Fri Jul  6 10:07:23 2012] fullrun_mos1_xmm0651770201_pi300-10000_cl_pass1_tfrozen_src14_1.ximg exists
[Fri Jul  6 10:07:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0651770201_pi300-10000_cl_pass1_tfrozen_src14.csv
[Fri Jul  6 10:07:23 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0651770201_pi300-10000_cl_pass1_tfrozen_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0651770201_pi300-10000_cl_pass1_tfrozen_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul  6 11:00:38 2012] Spatial fit model total counts = 468.678000, observed total counts = 423.000000
[Fri Jul  6 11:00:38 2012] Poor agreement between spatial fit and data for source 21
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Jul  6 11:00:38 2012] Vigneting correction estimate = 1.000000
[Fri Jul  6 11:00:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul  6 11:00:38 2012] Assessing source extent using major axis lower bound
[Fri Jul  6 11:00:38 2012] Source does appear to be extended
[Fri Jul  6 11:00:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul  6 13:13:12 2012] XMMSAS src. selection expression = ellipse(30280.975200, 31357.969800, 256.501207, 256.501207, 0.000000, X, Y)
[Fri Jul  6 13:13:12 2012] Writing source region out to fullrun_mos1_xmm0651770201_pi300-10000_pass1_cl_src21_src.reg
[Fri Jul  6 13:13:12 2012] Extracting stamp from image fullrun_mos1_xmm0651770201_pi300-10000_cl_sm2.00.img.gz, (334, 346) - (363, 376)
[Fri Jul  6 13:13:12 2012] XMMSAS bgd. selection expression = annulus(30280.975200, 31357.969800, 427.502012, 855.004025, X, Y) && !ellipse(29943.244598, 30782.764862, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jul  6 13:13:12 2012] Writing fullrun_mos1_xmm0651770201_pi300-10000_pass1_cl_src21.gif
[Fri Jul  6 13:19:11 2012] Mean detx,y = (-4742.31, -7498.39) 
[Fri Jul  6 13:19:12 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jul  6 13:19:20 2012] Binned source spectrum to 10 counts/bin
[Fri Jul  6 13:19:20 2012] Setting source spectrum file to fullrun_mos1_xmm0651770201_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Fri Jul  6 13:19:20 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0651770201_pi300-10000_pass1_cl_src21_bgd.pi.gz
[Fri Jul  6 14:07:20 2012] Not generating rmf since there are only 47 counts
[Fri Jul  6 14:07:20 2012] rmf not generated due to insufficient counts
[Fri Jul  6 15:07:40 2012] Updating aperture counts using extracted products
[Fri Jul  6 15:07:40 2012] Error reading totcts from fullrun_mos1_xmm0651770201_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Fri Jul  6 15:07:41 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul  6 15:07:41 2012] Using photon index=1.80, rate=0.00064, arf fullrun_mos1_xmm0651770201_pi300-10000_pass1_cl_src21.arf
[Fri Jul  6 15:07:41 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul  6 15:07:41 2012] Updating source flux to 1.5e-14
[Fri Jul  6 15:07:44 2012] Flag p found in src. 21 procflags, skipping spectral fitting
[Fri Jul  6 15:07:44 2012] Source 21 has fewer than 100.000000 counts, skipping spectral fitting