[Mon Mar  5 15:45:07 2012] Detection parameters:
  Position = (287.5, 318.9) = 7 48 33.58 -67 45 7.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 8189.3 +/- 108.5
  Background counts = 72.9
  Rate = 0.1 +/- 0.002

[Mon Mar  5 15:45:08 2012] Off-axis axis estimate = 1.68'
[Mon Mar  5 16:12:07 2012] Using EEF radius (= 7.27 ")to estimate initial spatial extent for simple fitting
[Mon Mar  5 16:12:07 2012] Initial guess for spatial extent in simple fitting = 7.27"
[Mon Mar  5 16:12:07 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.061
[Mon Mar  5 16:12:07 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.27"
[Mon Mar  5 16:39:40 2012] fullrun_mos1_xmm0651690101_pi300-10000_cl_pass0_src1.ximg exists
[Mon Mar  5 16:39:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0651690101_pi300-10000_cl_pass0_src1.csv
[Mon Mar  5 16:39:40 2012] fullrun_mos1_xmm0651690101_pi300-10000_cl_pass0_src1_1.ximg exists
[Mon Mar  5 16:39:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0651690101_pi300-10000_cl_pass0_src1.csv
[Mon Mar  5 16:39:40 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0651690101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0651690101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Mar  5 16:39:40 2012] fullrun_mos1_xmm0651690101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Mon Mar  5 16:39:40 2012] fullrun_mos1_xmm0651690101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Mar  5 16:39:40 2012] Fit fullrun_mos1_xmm0651690101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Mar  5 16:39:49 2012] Spatial fit model total counts = 7190.010000, observed total counts = 7195.000000
[Mon Mar  5 16:39:49 2012] Offset between fit and detection position for source 1 = 0.160172 pixels
[Mon Mar  5 16:39:49 2012] 7195.340000 total counts/ 1948.740000 bgd. counts: snr = 118.850498
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.160172 pixels
  Position = (287.4, 318.8) = 7 48 33.70 -67 45 8.5
  Extent = 5.3 (5.1-5.4)", rotation angle = 0
  Source counts = 5246.6 +/- 84.8
  Background counts = 1948.7
  Rate = 0.08 +/- 0.001
[Mon Mar  5 16:39:49 2012] Vigneting correction estimate = 1.000000
[Mon Mar  5 16:39:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Mar  5 16:39:49 2012] Assessing source extent using major axis lower bound
[Mon Mar  5 16:39:49 2012] Source does appear to be extended
[Mon Mar  5 16:39:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Mar  5 17:04:36 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Mar  5 17:04:36 2012] Initial guess for spatial extent in simple fitting = 5.27"
[Mon Mar  5 17:04:36 2012] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.025
[Mon Mar  5 17:04:36 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.27"
[Mon Mar  5 17:26:00 2012] fullrun_mos1_xmm0651690101_pi300-10000_cl_pass1_src1.ximg exists
[Mon Mar  5 17:26:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0651690101_pi300-10000_cl_pass1_src1.csv
[Mon Mar  5 17:26:00 2012] fullrun_mos1_xmm0651690101_pi300-10000_cl_pass1_src1_1.ximg exists
[Mon Mar  5 17:26:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0651690101_pi300-10000_cl_pass1_src1.csv
[Mon Mar  5 17:26:00 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0651690101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0651690101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Mar  5 17:26:01 2012] fullrun_mos1_xmm0651690101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Mon Mar  5 17:26:01 2012] fullrun_mos1_xmm0651690101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Mar  5 17:26:01 2012] Fit fullrun_mos1_xmm0651690101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Mar  5 17:26:08 2012] Spatial fit model total counts = 7195.000000, observed total counts = 7195.000000
[Mon Mar  5 17:26:08 2012] Offset between fit and detection position for source 1 = 0.001148 pixels
[Mon Mar  5 17:26:08 2012] 7200.440000 total counts/ 1950.130000 bgd. counts: snr = 118.892146
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.001148 pixels
  Position = (287.4, 318.8) = 7 48 33.70 -67 45 8.5
  Extent = 5.3 (5.1-5.4)", rotation angle = 0
  Source counts = 5250.3 +/- 84.9
  Background counts = 1950.1
  Rate = 0.08 +/- 0.001
[Mon Mar  5 17:26:08 2012] Vigneting correction estimate = 1.000000
[Mon Mar  5 17:26:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Mar  5 17:26:08 2012] Assessing source extent using major axis lower bound
[Mon Mar  5 17:26:08 2012] Source does appear to be extended
[Mon Mar  5 17:26:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Mar  5 17:53:46 2012] Counts = 5250.310000, rescaling region sizes by 2.000000
[Mon Mar  5 17:53:46 2012] XMMSAS src. selection expression = ellipse(24951.413600, 27690.811000, 631.395618, 631.395618, 0.000000, X, Y)
[Mon Mar  5 17:53:46 2012] Writing source region out to fullrun_mos1_xmm0651690101_pi300-10000_pass1_cl_src1_src.reg
[Mon Mar  5 17:53:46 2012] Extracting stamp from image fullrun_mos1_xmm0651690101_pi300-10000_cl_sm2.00.img.gz, (251, 283) - (324, 355)
[Mon Mar  5 17:53:46 2012] XMMSAS bgd. selection expression = annulus(24951.413600, 27690.811000, 2104.652061, 4209.304121, X, Y) && !ellipse(23584.146759, 28077.396210, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27884.540192, 27029.304810, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Mar  5 17:53:46 2012] Writing fullrun_mos1_xmm0651690101_pi300-10000_pass1_cl_src1.gif
[Mon Mar  5 17:53:51 2012] Mean detx,y = (284.08, -260.99) 
[Mon Mar  5 17:53:52 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Mar  5 17:54:07 2012] Binned source spectrum to 10 counts/bin
[Mon Mar  5 17:54:07 2012] Setting source spectrum file to fullrun_mos1_xmm0651690101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Mar  5 17:54:07 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0651690101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Mon Mar  5 18:12:44 2012] Updating aperture counts using extracted products
[Mon Mar  5 18:12:44 2012] Error reading totcts from fullrun_mos1_xmm0651690101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Mar  5 18:12:44 2012] Calculating source flux in energy range 0.30-8.00
[Mon Mar  5 18:12:44 2012] Using photon index=1.80, rate=0.0814, arf fullrun_mos1_xmm0651690101_pi300-10000_pass1_cl_src1.arf
[Mon Mar  5 18:12:44 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Mar  5 18:12:44 2012] Updating source flux to 7.8e-13
[Mon Mar  5 18:13:05 2012] Reading fit data from xmm0651690101/analysis//spectral/fullrun_mos1_xmm0651690101_pi300-10000_pass1_cl_src1_pl.csv
[Mon Mar  5 18:13:05 2012] Spectral fit parameter nH value = 4.20601e+21
[Mon Mar  5 18:13:05 2012] Spectral fit parameter PhoIndex value = 4.82132
[Mon Mar  5 18:13:05 2012] Failed to get F(0.3-8.0) from xmm0651690101/analysis//spectral/fullrun_mos1_xmm0651690101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Mon Mar  5 18:13:05 2012] Calculating source flux in energy range 0.30-8.00
[Mon Mar  5 18:13:05 2012] Using Nh = 4.2e+21, photon index=4.82, rate=0.0814, arf fullrun_mos1_xmm0651690101_pi300-10000_pass1_cl_src1.arf
[Mon Mar  5 18:13:05 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Mar  5 18:13:05 2012] Updating source flux to 5e-13