[Wed Jun 13 11:36:54 2012] Detection parameters:
  Position = (317.2, 297.7) = 18 46 12.69 -2 22 29.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 17290.0 +/- 157.0
  Background counts = 159.3
  Rate = 0.7 +/- 0.007

[Wed Jun 13 11:36:55 2012] Off-axis axis estimate = 1.36'
[Wed Jun 13 11:39:53 2012] Using EEF radius (= 7.11 ")to estimate initial spatial extent for simple fitting
[Wed Jun 13 11:39:53 2012] Initial guess for spatial extent in simple fitting = 7.11"
[Wed Jun 13 11:39:53 2012] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.878
[Wed Jun 13 11:39:53 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 7.11"
[Wed Jun 13 12:13:56 2012] fullrun_pn_xmm0651680301_pi300-10000_cl_pass0_src2.ximg exists
[Wed Jun 13 12:13:56 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0651680301_pi300-10000_cl_pass0_src2.csv
[Wed Jun 13 12:13:56 2012] fullrun_pn_xmm0651680301_pi300-10000_cl_pass0_src2_1.ximg exists
[Wed Jun 13 12:13:56 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0651680301_pi300-10000_cl_pass0_src2.csv
[Wed Jun 13 12:13:56 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0651680301_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0651680301_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 13 12:13:56 2012] fullrun_pn_xmm0651680301_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Wed Jun 13 12:13:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0651680301_pi300-10000_cl_pass0_tfrozen_src2.csv
[Wed Jun 13 12:13:56 2012] fullrun_pn_xmm0651680301_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Wed Jun 13 12:13:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0651680301_pi300-10000_cl_pass0_tfrozen_src2.csv
[Wed Jun 13 12:13:56 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0651680301_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0651680301_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 13 12:48:38 2012] Spatial fit model total counts = -869.716000, observed total counts = 10375.000000
[Wed Jun 13 12:48:38 2012] Poor agreement between spatial fit and data for source 2
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Jun 13 12:48:38 2012] Vigneting correction estimate = 1.000000
[Wed Jun 13 12:48:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 13 12:48:38 2012] Assessing source extent using major
[Wed Jun 13 12:48:38 2012] Source does appear to be extended
[Wed Jun 13 12:48:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 13 12:48:50 2012] Using EEF radius (= 7.11 ")to estimate initial spatial extent for simple fitting
[Wed Jun 13 12:48:50 2012] Initial guess for spatial extent in simple fitting = 7.11"
[Wed Jun 13 12:48:50 2012] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.878
[Wed Jun 13 12:48:50 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 7.11"
[Wed Jun 13 13:16:42 2012] fullrun_pn_xmm0651680301_pi300-10000_cl_pass1_src2.ximg exists
[Wed Jun 13 13:16:42 2012] fullrun_pn_xmm0651680301_pi300-10000_cl_pass1_src2_1.ximg exists
[Wed Jun 13 13:16:42 2012] Fit fullrun_pn_xmm0651680301_pi300-10000_cl_pass1_src2 appears to have run properly
[Wed Jun 13 13:16:42 2012] fullrun_pn_xmm0651680301_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Wed Jun 13 13:16:42 2012] fullrun_pn_xmm0651680301_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Wed Jun 13 13:16:42 2012] Fit fullrun_pn_xmm0651680301_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Wed Jun 13 13:48:56 2012] Spatial fit model total counts = 11152.800000, observed total counts = 10375.000000
[Wed Jun 13 13:48:56 2012] Offset between fit and detection position for source 2 = 0.177523 pixels
[Wed Jun 13 13:48:56 2012] 11095.520000 total counts/ 3257.360000 bgd. counts: snr = 137.335004
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.177523 pixels
  Position = (317.1, 297.5) = 18 46 12.71 -2 22 29.2
  Extent = 6.1 (6.0-6.3)" x 5.3 (5.2-5.5)", rotation angle = 85 (79-93) degrees
  Source counts = 7838.2 +/- 105.3
  Background counts = 3257.4
  Rate = 0.4 +/- 0.005
[Wed Jun 13 13:48:56 2012] Vigneting correction estimate = 1.000000
[Wed Jun 13 13:48:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 13 13:48:56 2012] Assessing source extent using major axis lower bound
[Wed Jun 13 13:48:56 2012] Source does appear to be extended
[Wed Jun 13 13:48:56 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.09
[Wed Jun 13 13:49:07 2012] Counts = 7838.160000, rescaling region sizes by 2.000000
[Wed Jun 13 13:49:07 2012] XMMSAS src. selection expression = ellipse(27539.144060, 25835.260400, 734.361621, 641.742018, 85.137590, X, Y)
[Wed Jun 13 13:49:07 2012] Writing source region out to fullrun_pn_xmm0651680301_pi300-10000_pass1_cl_src2_src.reg
[Wed Jun 13 13:49:07 2012] Extracting stamp from image fullrun_pn_xmm0651680301_pi300-10000_cl_sm2.00.img.gz, (275, 255) - (359, 340)
[Wed Jun 13 13:49:07 2012] XMMSAS bgd. selection expression = annulus(27539.144060, 25835.260400, 2447.872070, 4895.744141, X, Y) && !ellipse(26790.994690, 25889.819336, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29239.183929, 25643.504303, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23411.864563, 20732.551041, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jun 13 13:49:07 2012] Writing fullrun_pn_xmm0651680301_pi300-10000_pass1_cl_src2.gif
[Wed Jun 13 13:49:46 2012] Mean detx,y = (-2682.69, 1706.75) 
[Wed Jun 13 13:49:48 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jun 13 13:50:53 2012] Binned source spectrum to 10 counts/bin
[Wed Jun 13 13:50:53 2012] Setting source spectrum file to fullrun_pn_xmm0651680301_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Wed Jun 13 13:50:53 2012] Setting bgd. spectrum file to fullrun_pn_xmm0651680301_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Wed Jun 13 14:32:49 2012] Updating aperture counts using extracted products
[Wed Jun 13 14:32:49 2012] Error reading totcts from fullrun_pn_xmm0651680301_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Wed Jun 13 14:32:50 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jun 13 14:32:50 2012] Using photon index=1.80, rate=0.407, arf fullrun_pn_xmm0651680301_pi300-10000_pass1_cl_src2.arf
[Wed Jun 13 14:32:50 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 13 14:32:50 2012] Updating source flux to 1.2e-12
[Wed Jun 13 14:33:47 2012] Flag p found in src. 2 procflags, skipping spectral fitting