[Thu Nov 24 22:34:00 2011] Detection parameters:
  Position = (275.7, 293.1) = 0 56 42.29 60 42 58.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 231950.5 +/- 549.2
  Background counts = 13.0
  Rate = 1e+01 +/- 0.03

[Thu Nov 24 22:34:00 2011] Off-axis axis estimate = 1.69'
[Thu Nov 24 23:03:07 2011] Using EEF radius (= 7.27 ")to estimate initial spatial extent for simple fitting
[Thu Nov 24 23:03:07 2011] Initial guess for spatial extent in simple fitting = 7.27"
[Thu Nov 24 23:03:07 2011] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.848
[Thu Nov 24 23:03:07 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 7.27"
[Thu Nov 24 23:37:54 2011] fullrun_mos2_xmm0651670501_pi300-10000_cl_pass0_src1.ximg exists
[Thu Nov 24 23:37:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0651670501_pi300-10000_cl_pass0_src1.csv
[Thu Nov 24 23:37:54 2011] fullrun_mos2_xmm0651670501_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Nov 24 23:37:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0651670501_pi300-10000_cl_pass0_src1.csv
[Thu Nov 24 23:37:54 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0651670501_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0651670501_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Nov 24 23:37:54 2011] fullrun_mos2_xmm0651670501_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Nov 24 23:37:54 2011] fullrun_mos2_xmm0651670501_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Nov 24 23:37:54 2011] Fit fullrun_mos2_xmm0651670501_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Nov 24 23:37:59 2011] Spatial fit model total counts = 200070.000000, observed total counts = 209754.000000
[Thu Nov 24 23:37:59 2011] Offset between fit and detection position for source 1 = 0.173222 pixels
[Thu Nov 24 23:37:59 2011] 200004.000000 total counts/ 25600.000000 bgd. counts: snr = 1090.025000
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.173222 pixels
  Position = (275.7, 293.3) = 0 56 42.31 60 42 58.4
  Extent = 6.2 (6.2-6.2)", rotation angle = 0
  Source counts = 174404.0 +/- 447.2
  Background counts = 25600.0
  Rate = 8 +/- 0.02
[Thu Nov 24 23:37:59 2011] Vigneting correction estimate = 1.000000
[Thu Nov 24 23:37:59 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Nov 24 23:37:59 2011] Assessing source extent using major axis lower bound
[Thu Nov 24 23:37:59 2011] Source does appear to be extended
[Thu Nov 24 23:37:59 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Nov 25 01:05:41 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Nov 25 01:05:41 2011] Initial guess for spatial extent in simple fitting = 6.23"
[Fri Nov 25 01:05:41 2011] source mask rpix=1.4, npix_max = 14, mask sum = 16, frac = 1.072
[Fri Nov 25 01:05:41 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 6.23"
[Fri Nov 25 01:46:17 2011] fullrun_mos2_xmm0651670501_pi300-10000_cl_pass1_src1.ximg exists
[Fri Nov 25 01:46:17 2011] fullrun_mos2_xmm0651670501_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Nov 25 01:46:17 2011] Fit fullrun_mos2_xmm0651670501_pi300-10000_cl_pass1_src1 appears to have run properly
[Fri Nov 25 01:46:17 2011] fullrun_mos2_xmm0651670501_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Nov 25 01:46:17 2011] fullrun_mos2_xmm0651670501_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Nov 25 01:46:17 2011] Fit fullrun_mos2_xmm0651670501_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Nov 25 01:46:20 2011] Spatial fit model total counts = 199316.000000, observed total counts = 208942.000000
[Fri Nov 25 01:46:20 2011] Offset between fit and detection position for source 1 = 0.004047 pixels
[Fri Nov 25 01:46:20 2011] 199561.000000 total counts/ 25600.000000 bgd. counts: snr = 1087.256250
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.004047 pixels
  Position = (275.7, 293.3) = 0 56 42.31 60 42 58.4
  Extent = 6.5 (6.5-6.5)" x 5.9 (5.9-5.9)", rotation angle = 49 (47-51) degrees
  Source counts = 173961.0 +/- 446.7
  Background counts = 25600.0
  Rate = 8 +/- 0.02
[Fri Nov 25 01:46:20 2011] Vigneting correction estimate = 1.000000
[Fri Nov 25 01:46:20 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Nov 25 01:46:20 2011] Assessing source extent using major axis lower bound
[Fri Nov 25 01:46:20 2011] Source does appear to be extended
[Fri Nov 25 01:46:20 2011] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.09
[Fri Nov 25 02:39:30 2011] Counts = 173961.000000, rescaling region sizes by 3.000000
[Fri Nov 25 02:39:30 2011] XMMSAS src. selection expression = ellipse(23935.624200, 25469.601000, 1167.753634, 1065.472231, 48.774100, X, Y)
[Fri Nov 25 02:39:30 2011] Writing source region out to fullrun_mos2_xmm0651670501_pi300-10000_pass1_cl_src1_src.reg
[Fri Nov 25 02:39:30 2011] Extracting stamp from image fullrun_mos2_xmm0651670501_pi300-10000_cl_sm2.00.img.gz, (209, 226) - (343, 360)
[Fri Nov 25 02:39:30 2011] XMMSAS bgd. selection expression = annulus(23935.624200, 25469.601000, 5838.768168, 11677.536336, X, Y) && !ellipse(23366.402496, 26314.395691, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Nov 25 02:39:30 2011] Writing fullrun_mos2_xmm0651670501_pi300-10000_pass1_cl_src1.gif
[Fri Nov 25 02:39:57 2011] Mean detx,y = (156.53, 104.85) 
[Fri Nov 25 02:40:02 2011] Setting backscal keywords in source and bgd. spectrum
[Fri Nov 25 02:47:21 2011] Binned source spectrum to 10 counts/bin
[Fri Nov 25 02:47:21 2011] Setting source spectrum file to fullrun_mos2_xmm0651670501_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Nov 25 02:47:21 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0651670501_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri Nov 25 02:55:40 2011] Updating aperture counts using extracted products
[Fri Nov 25 02:55:40 2011] Error reading totcts from fullrun_mos2_xmm0651670501_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Nov 25 02:55:40 2011] Calculating source flux in energy range 0.30-8.00
[Fri Nov 25 02:55:40 2011] Using photon index=1.80, rate=7.8, arf fullrun_mos2_xmm0651670501_pi300-10000_pass1_cl_src1.arf
[Fri Nov 25 02:55:40 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Nov 25 02:55:40 2011] Updating source flux to 9.4e-11
[Fri Nov 25 02:56:51 2011] Reading fit data from xmm0651670501/analysis//spectral/fullrun_mos2_xmm0651670501_pi300-10000_pass1_cl_src1_pl.csv
[Fri Nov 25 02:56:51 2011] Spectral fit parameter nH value = 1.49707e+21
[Fri Nov 25 02:56:51 2011] Spectral fit parameter PhoIndex value = 1.54258
[Fri Nov 25 02:56:51 2011] Failed to get F(0.3-8.0) from xmm0651670501/analysis//spectral/fullrun_mos2_xmm0651670501_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Fri Nov 25 02:56:51 2011] Calculating source flux in energy range 0.30-8.00
[Fri Nov 25 02:56:51 2011] Using Nh = 1.5e+21, photon index=1.54, rate=7.8, arf fullrun_mos2_xmm0651670501_pi300-10000_pass1_cl_src1.arf
[Fri Nov 25 02:56:51 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Nov 25 02:56:51 2011] Updating source flux to 1.1e-10