[Sun Dec 18 02:23:43 2011] Detection parameters:
  Position = (294.3, 315.0) = 0 56 32.11 60 44 52.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 672.2 +/- 40.3
  Background counts = 74.5
  Rate = 0.06 +/- 0.003

[Sun Dec 18 02:23:43 2011] Off-axis axis estimate = 1.24'
[Sun Dec 18 02:34:02 2011] Using EEF radius (= 7.05 ")to estimate initial spatial extent for simple fitting
[Sun Dec 18 02:34:02 2011] Initial guess for spatial extent in simple fitting = 7.05"
[Sun Dec 18 02:34:02 2011] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.890
[Sun Dec 18 02:34:02 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 7.05"
[Sun Dec 18 02:50:25 2011] fullrun_pn_xmm0651670401_pi300-10000_cl_pass0_src3.ximg exists
[Sun Dec 18 02:50:25 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0651670401_pi300-10000_cl_pass0_src3.csv
[Sun Dec 18 02:50:25 2011] fullrun_pn_xmm0651670401_pi300-10000_cl_pass0_src3_1.ximg exists
[Sun Dec 18 02:50:25 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0651670401_pi300-10000_cl_pass0_src3.csv
[Sun Dec 18 02:50:25 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0651670401_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0651670401_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 18 02:50:25 2011] fullrun_pn_xmm0651670401_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Sun Dec 18 02:50:25 2011] fullrun_pn_xmm0651670401_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Sun Dec 18 02:50:25 2011] Fit fullrun_pn_xmm0651670401_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Sun Dec 18 06:41:03 2011] Spatial fit model total counts = 4480.020000, observed total counts = 4482.000000
[Sun Dec 18 06:41:03 2011] Offset between fit and detection position for source 3 = 7.173092 pixels
[Sun Dec 18 06:41:03 2011] 4585.530000 total counts/ 3136.560000 bgd. counts: snr = 25.872154
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 7.173092 pixels
  Position = (289.1, 310.0) = 0 56 35.14 60 44 30.9
  Extent = 14.1 (14.1-28.2)", rotation angle = 0
  Source counts = 1449.0 +/- 67.7
  Background counts = 3136.6
  Rate = 0.08 +/- 0.004
[Sun Dec 18 06:41:03 2011] Vigneting correction estimate = 1.000000
[Sun Dec 18 06:41:03 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 18 06:41:03 2011] Assessing source extent using major axis lower bound
[Sun Dec 18 06:41:03 2011] Source does appear to be extended
[Sun Dec 18 06:41:03 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec 18 06:41:14 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Dec 18 06:41:14 2011] Initial guess for spatial extent in simple fitting = 14.09"
[Sun Dec 18 06:41:14 2011] source mask rpix=3.2, npix_max = 55, mask sum = 64, frac = 1.144
[Sun Dec 18 06:41:14 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 14.09"
[Sun Dec 18 07:16:27 2011] fullrun_pn_xmm0651670401_pi300-10000_cl_pass1_src3.ximg exists
[Sun Dec 18 07:16:27 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0651670401_pi300-10000_cl_pass1_src3.csv
[Sun Dec 18 07:16:27 2011] fullrun_pn_xmm0651670401_pi300-10000_cl_pass1_src3_1.ximg exists
[Sun Dec 18 07:16:27 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0651670401_pi300-10000_cl_pass1_src3.csv
[Sun Dec 18 07:16:27 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0651670401_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0651670401_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 18 07:16:27 2011] fullrun_pn_xmm0651670401_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Sun Dec 18 07:16:27 2011] fullrun_pn_xmm0651670401_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Sun Dec 18 07:16:27 2011] Fit fullrun_pn_xmm0651670401_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Sun Dec 18 08:04:23 2011] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 10.157771 pixels away
[Sun Dec 18 08:04:23 2011] Warning, spatial fit 3 centroid is now closest to src. 2
[Sun Dec 18 08:04:23 2011] Vigneting correction estimate = 1.000000
[Sun Dec 18 08:04:23 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 18 08:04:23 2011] Assessing source extent using major axis lower bound
[Sun Dec 18 08:04:23 2011] Source does appear to be extended
[Sun Dec 18 08:04:23 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec 18 08:04:23 2011] Source is confused with source 2
[Sun Dec 18 08:04:32 2011] Counts = 1448.970000, rescaling region sizes by 2.000000
[Sun Dec 18 08:04:32 2011] XMMSAS src. selection expression = ellipse(25107.202000, 26917.806000, 1691.352049, 1691.352049, 0.000000, X, Y)
[Sun Dec 18 08:04:32 2011] Writing source region out to fullrun_pn_xmm0651670401_pi300-10000_pass1_cl_src3_src.reg
[Sun Dec 18 08:04:32 2011] Extracting stamp from image fullrun_pn_xmm0651670401_pi300-10000_cl_sm2.00.img.gz, (192, 213) - (386, 407)
[Sun Dec 18 08:04:32 2011] XMMSAS bgd. selection expression = annulus(25107.202000, 26917.806000, 5637.840162, 11275.680324, X, Y) && !ellipse(26288.135000, 28490.051800, 759.451222, 759.451222, 0.000000, X, Y) && !ellipse(25936.922000, 27703.640000, 2253.584065, 2253.584065, 0.000000, X, Y) && !ellipse(25868.614000, 25835.492000, 1059.377206, 1059.377206, 0.000000, X, Y) && !ellipse(24073.225200, 25074.496400, 1689.515282, 1689.515282, 0.000000, X, Y)
[Sun Dec 18 08:04:32 2011] Writing fullrun_pn_xmm0651670401_pi300-10000_pass1_cl_src3.gif
[Sun Dec 18 08:17:45 2011] Mean detx,y = (92.57, 982.46) 
[Sun Dec 18 08:17:50 2011] Setting backscal keywords in source and bgd. spectrum
[Sun Dec 18 08:19:54 2011] Binned source spectrum to 10 counts/bin
[Sun Dec 18 08:19:55 2011] Setting source spectrum file to fullrun_pn_xmm0651670401_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sun Dec 18 08:19:55 2011] Setting bgd. spectrum file to fullrun_pn_xmm0651670401_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Sun Dec 18 11:00:40 2011] Updating aperture counts using extracted products
[Sun Dec 18 11:00:40 2011] Error reading totcts from fullrun_pn_xmm0651670401_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sun Dec 18 11:00:41 2011] Calculating source flux in energy range 0.30-8.00
[Sun Dec 18 11:00:41 2011] Using photon index=1.80, rate=0.0829, arf fullrun_pn_xmm0651670401_pi300-10000_pass1_cl_src3.arf
[Sun Dec 18 11:00:41 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Dec 18 11:00:41 2011] Updating source flux to 2.5e-13
[Sun Dec 18 11:01:50 2011] Flag c found in src. 3 procflags, skipping spectral fitting