[Sun Dec 18 02:23:42 2011] Detection parameters:
  Position = (303.2, 328.6) = 0 56 26.83 60 45 52.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 640.1 +/- 33.7
  Background counts = 68.6
  Rate = 0.06 +/- 0.003

[Sun Dec 18 02:23:43 2011] Off-axis axis estimate = 2.22'
[Sun Dec 18 02:34:02 2011] Using EEF radius (= 7.54 ")to estimate initial spatial extent for simple fitting
[Sun Dec 18 02:34:02 2011] Initial guess for spatial extent in simple fitting = 7.54"
[Sun Dec 18 02:34:02 2011] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.003
[Sun Dec 18 02:34:02 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 7.54"
[Sun Dec 18 02:50:25 2011] fullrun_pn_xmm0651670401_pi300-10000_cl_pass0_src1.ximg exists
[Sun Dec 18 02:50:25 2011] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0651670401_pi300-10000_cl_pass0_src1.csv
[Sun Dec 18 02:50:25 2011] fullrun_pn_xmm0651670401_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun Dec 18 02:50:25 2011] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0651670401_pi300-10000_cl_pass0_src1.csv
[Sun Dec 18 02:50:25 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0651670401_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0651670401_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 18 02:50:25 2011] fullrun_pn_xmm0651670401_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun Dec 18 02:50:25 2011] fullrun_pn_xmm0651670401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Dec 18 02:50:25 2011] Fit fullrun_pn_xmm0651670401_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Dec 18 06:41:03 2011] Spatial fit model total counts = 1821.030000, observed total counts = 1965.000000
[Sun Dec 18 06:41:03 2011] Offset between fit and detection position for source 1 = 0.493198 pixels
[Sun Dec 18 06:41:03 2011] 1613.672000 total counts/ 952.095000 bgd. counts: snr = 21.440764
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.493198 pixels
  Position = (302.8, 328.3) = 0 56 27.03 60 45 50.7
  Extent = 8.6 (7.9-9.4)", rotation angle = 0
  Source counts = 661.6 +/- 40.2
  Background counts = 952.1
  Rate = 0.04 +/- 0.002
[Sun Dec 18 06:41:03 2011] Vigneting correction estimate = 1.000000
[Sun Dec 18 06:41:03 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 18 06:41:03 2011] Assessing source extent using major axis lower bound
[Sun Dec 18 06:41:03 2011] Source does appear to be extended
[Sun Dec 18 06:41:03 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec 18 06:41:03 2011] Source is confused with source 2
[Sun Dec 18 06:41:14 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Dec 18 06:41:14 2011] Initial guess for spatial extent in simple fitting = 8.58"
[Sun Dec 18 06:41:14 2011] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.023
[Sun Dec 18 06:41:14 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 8.58"
[Sun Dec 18 07:16:27 2011] fullrun_pn_xmm0651670401_pi300-10000_cl_pass1_src1.ximg exists
[Sun Dec 18 07:16:27 2011] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0651670401_pi300-10000_cl_pass1_src1.csv
[Sun Dec 18 07:16:27 2011] fullrun_pn_xmm0651670401_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun Dec 18 07:16:27 2011] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0651670401_pi300-10000_cl_pass1_src1.csv
[Sun Dec 18 07:16:27 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0651670401_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0651670401_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 18 07:16:27 2011] fullrun_pn_xmm0651670401_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun Dec 18 07:16:27 2011] fullrun_pn_xmm0651670401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Dec 18 07:16:27 2011] Fit fullrun_pn_xmm0651670401_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Dec 18 08:04:23 2011] Spatial fit model total counts = 1915.910000, observed total counts = 2026.000000
[Sun Dec 18 08:04:23 2011] Offset between fit and detection position for source 1 = 0.275133 pixels
[Sun Dec 18 08:04:23 2011] 1721.497000 total counts/ 940.918000 bgd. counts: snr = 25.447257
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.275133 pixels
  Position = (302.7, 328.0) = 0 56 27.09 60 45 49.5
  Extent = 9.5 (8.6-10.2)", rotation angle = 0
  Source counts = 780.6 +/- 41.5
  Background counts = 940.9
  Rate = 0.04 +/- 0.002
[Sun Dec 18 08:04:23 2011] Vigneting correction estimate = 1.000000
[Sun Dec 18 08:04:23 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 18 08:04:23 2011] Assessing source extent using major axis lower bound
[Sun Dec 18 08:04:23 2011] Source does appear to be extended
[Sun Dec 18 08:04:23 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec 18 08:04:32 2011] XMMSAS src. selection expression = ellipse(26288.135000, 28490.051800, 569.588416, 569.588416, 0.000000, X, Y)
[Sun Dec 18 08:04:32 2011] Writing source region out to fullrun_pn_xmm0651670401_pi300-10000_pass1_cl_src1_src.reg
[Sun Dec 18 08:04:32 2011] Extracting stamp from image fullrun_pn_xmm0651670401_pi300-10000_cl_sm2.00.img.gz, (270, 295) - (335, 361)
[Sun Dec 18 08:04:32 2011] XMMSAS bgd. selection expression = annulus(26288.135000, 28490.051800, 949.314027, 1898.628055, X, Y) && !ellipse(25936.922000, 27703.640000, 2253.584065, 2253.584065, 0.000000, X, Y) && !ellipse(25107.202000, 26917.806000, 1127.568032, 1127.568032, 0.000000, X, Y) && !ellipse(25868.614000, 25835.492000, 1059.377206, 1059.377206, 0.000000, X, Y) && !ellipse(24073.225200, 25074.496400, 1689.515282, 1689.515282, 0.000000, X, Y)
[Sun Dec 18 08:04:32 2011] Writing fullrun_pn_xmm0651670401_pi300-10000_pass1_cl_src1.gif
[Sun Dec 18 08:06:08 2011] Mean detx,y = (33.41, 3721.21) 
[Sun Dec 18 08:06:13 2011] Setting backscal keywords in source and bgd. spectrum
[Sun Dec 18 08:06:22 2011] Binned source spectrum to 10 counts/bin
[Sun Dec 18 08:06:23 2011] Setting source spectrum file to fullrun_pn_xmm0651670401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Dec 18 08:06:23 2011] Setting bgd. spectrum file to fullrun_pn_xmm0651670401_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sun Dec 18 11:00:40 2011] Updating aperture counts using extracted products
[Sun Dec 18 11:00:40 2011] Error reading totcts from fullrun_pn_xmm0651670401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Dec 18 11:00:41 2011] Calculating source flux in energy range 0.30-8.00
[Sun Dec 18 11:00:41 2011] Using photon index=1.80, rate=0.0447, arf fullrun_pn_xmm0651670401_pi300-10000_pass1_cl_src1.arf
[Sun Dec 18 11:00:41 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Dec 18 11:00:41 2011] Updating source flux to 2.3e-13
[Sun Dec 18 11:01:50 2011] Flag c found in src. 1 procflags, skipping spectral fitting
[Sun Dec 18 11:03:15 2011] Reading fit data from xmm0651670401/analysis//spectral/fullrun_pn_xmm0651670401_pi300-10000_pass1_cl_src1_pl.csv
[Sun Dec 18 11:03:15 2011] Spectral fit parameter nH value = 6.44095e+20
[Sun Dec 18 11:03:15 2011] Spectral fit parameter PhoIndex value = 1.4096
[Sun Dec 18 11:03:15 2011] Failed to get F(0.3-8.0) from xmm0651670401/analysis//spectral/fullrun_pn_xmm0651670401_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sun Dec 18 11:03:15 2011] Calculating source flux in energy range 0.30-8.00
[Sun Dec 18 11:03:15 2011] Using Nh = 6.4e+20, photon index=1.41, rate=0.0447, arf fullrun_pn_xmm0651670401_pi300-10000_pass1_cl_src1.arf
[Sun Dec 18 11:03:15 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Dec 18 11:03:15 2011] Updating source flux to 3.1e-13